|
|
Instrumentation & Control Equipments
|
Suppliers Directory
|
APLAB-SEBA ELECTRONICS LTD
| | Address : |
A 5 APLAB HOUSE, WAGLE IND ESTATE THANE - 400 604 |
| Telephone : |
022 5321861, , 62, 63 |
| Fax : |
91 22 5323137 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
LINE PHASE DETECTOR - APLAB-SEBA MANUFACTURES A CONVENIENT KIT TO TEST BOTH UNDERGROUND AND OVERHEAD LIVE CABLES. THE BASIC FUNCTIONS ARE TO VERIFY SYSTEM VOLTAGE AND DETECT IN-PHASE/OUT-OF-PHASE PARAMETERS BETWEEN TWO-LINES AND ARE AVAILABLE IN TWO VERSIONS: I) DEDICATED UNIT-SUITABLE FOR A PARTICULAR SYSTEM VOLTAGE LIKE 11 KV, 22 KV OR 33 KV; AND, II) VERSATILE UNIT SUITABLE TO TEST LINES OF 11 KV, 22 KV AND 33 KV IN A SINGLE KIT AND COMES WITH AN OPTIONAL VERSION SUITABLE TO TEST LINES OF 6.6 KV, 11 KV AND 22 KV IN A SINGLE UNIT IS ALSO AVAILABLE.
|
|
MEGGER - MEG - APLAB-SEBA OFFERS FULLY ELECTRONIC HIGH VOLTAGE (5 KV) MEGGER MEG 5, SPECIALLY SUITED FOR TRUE RESISTANCE MEASUREMENT OF ELECTRICAL HIGH VOLTAGE CABLES. IT IS A TRULY PORTABLE EQUIPMENT WITH DIRECT DIGITAL READ OUT OF MEGOHMS FACILITATING QUICK AND EASY READING OF THE MEGOHM VALUE WITH INSULATION RESISTANCE MEASUREMENT RANGING FROM 2 TO 2000 MEGOHM ARE MEASURABLE ON 5 KV RANGE. IT ALSO HAS A RANGE OF 1 KV FOR USE ON LT CABLES. MEG 5, WITH 5 MA CURRENT, IS SPECIALLY USEFUL FOR QUICK CHARGING OF CABLES UNDER TEST. MEG 5 IS ALSO USEFUL FOR TESTING INSULATION OF TRANSFORMERS, MOTORS, SWITCHGEARS, DOMESTIC APPLIANCES, POWER TOOLS, ETC AND FACILITATES TO HOLD THE LAST READING OVERLOAD TRIP AND POWER SAVING WHILE NOT IN USE. BATTERY OPERATED WITH A BUILT-IN BATTERY CHARGER MAKES IT MOST SUITABLE FOR FIELD USE.
|
|
PRESSURE TESTING EQUIPMENT - APLAB-SEBA HAS DEVELOPED A PORTABLE 35 KV PRESSURE TESTING EQUIPMENT SPECIALLY SUITED FOR TESTING HV ELECTRICAL CABLES AND PROVIDES CONTINUOUSLY VARIABLE DC VOLTAGE (0-35 KV). IT IS RATED FOR 5 MA LOAD CURRENT UP TO MAXIMUM VOLTAGE. DPMS ARE PROVIDED FOR KV (0.1 KV RESOLUTION) AND MA (0.01 MA RESOLUTION) ARE PROVIDED GIVING EXCELLENT RESOLUTION FOR TESTING AND INTERPRETATION OF TEST RESULTS. THE HIGH OUTPUT CURRENT CAPACITY (5 MA) UP TO MAXIMUM VOLTAGE MEANS THAT THE CABLE CAN BE CHANGED MUCH MORE QUICKLY TO THE DESIRED VOLTAGE THAN OTHER HIGH POT TESTING EQUIPMENT, THUS, SAVING IN TESTING TIME AND HAS THE FACILITY OF SOFT DISCHARGE OF CONNECTED LOAD/EQUIPMENT AT THE END OF TEST/OR ON TRIPPING, THROUGH AN INTERNAL DISCHARGE DEVICE. OTHER SAFETY FEATURES INCLUDE VARIAC ZERO PROTECTION, OVER VOLTAGE/OVER CURRENT/OVER TEMPERATURE TRIP, OUTPUT BLOCK/OUTPUT CABLE CONNECTED PORTION, TO SAFEGUARD THE EQUIPMENT AND IS TRULY PORTABLE WITH WEIGHT UNDER 25 KG ACHIEVED THROUGH SPECIAL COMPONENTS. THUS IT IS IDEALLY SUITED FOR TESTING DIELECTRIC STRENGTH AND INSULATION OF CABLES (UP 22 KV) FOR TESTING AFTER INITIAL INSTALLATION, DURING FAULT LOCATION PROCESS AND TO TEST GOODNESS OF FAULT REPAIR JOB.
|
|
PORTABLE PRESSURE TESTER - APLAB-SEBA HAS DEVELOPED A PORTABLE 35 KV PRESSURE TESTING EQUIPMENT SPECIALLY SUITED FOR TESTING HV ELECTRICAL CABLES. THE UNIT PROVIDES CONTINUOUSLY VARIABLE DC VOLTAGE (0-35 KV) AND IS RATED FOR 5 MA LOAD CURRENT UP TO MAXIMUM VOLTAGE. DPMS ARE PROVIDED FOR KV (0.1 KV RESOLUTION) AND MA (0.01 MA RESOLUTION) ARE PROVIDED GIVING EXCELLENT RESOLUTION FOR TESTING AND INTERPRETATION OF TEST RESULTS. THE HIGH OUTPUT CURRENT CAPACITY (5 MA) UP TO MAXIMUM VOLTAGE MEANS THAT THE CABLE CAN BE CHANGED MUCH MORE QUICKLY TO THE DESIRED VOLTAGE THAN OTHER HIGH POT TESTING EQUIPMENT, THUS, SAVING IN TESTING TIME AND OFFERS THE FACILITY OF SOFT DISCHARGE OF CONNECTED LOAD/EQUIPMENT AT THE END OF TEST/OR ON TRIPPING, THROUGH AN INTERNAL DISCHARGE DEVICE. OTHER SAFETY FEATURES INCLUDE VARIAC ZERO PROTECTION, OVER VOLTAGE/OVER CURRENT/OVER TEMPERATURE TRIP, OUTPUT BLOCK/OUTPUT CABLE CONNECTED PORTION, TO SAFEGUARD THE EQUIPMENT AND IS TRULY PORTABLE WITH WEIGHT UNDER 25 KG ACHIEVED THROUGH SPECIAL COMPONENTS MAKING IT IDEALLY SUITED FOR TESTING DIELECTRIC STRENGTH AND INSULATION OF CABLES (UP 22 KV) FOR TESTING AFTER INITIAL INSTALLATION, DURING FAULT LOCATION PROCESS AND TO TEST GOODNESS OF FAULT REPAIR JOB.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
