|
|
Instrumentation & Control Equipments
|
Suppliers Directory
|
ELECTRONIC ENTERPRISES (I) P LTD
| | Address : |
216 REGAL IND ESTATE A DONDE MARG, SEWRI |
| Telephone : |
91-22-4137096 |
| Fax : |
91-22-4133341 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
DELTAMETER - ELECTRONIC ENTERPRISES, A MUMBAI-BASED MANUFACTURER, OFFERS DELTAMETERS, WHICH IS A COMPACT AND PORTABLE INSTRUMENT WORKING ON THE PRINCIPLE OF EDDY CURRENTS AND IS HELPFUL TO MEASURE METALLIC OR NON-CONDUCTIVE COATINGS ON METALLIC BASES AND METALLIC COATINGS ON CONDUCTIVE BASES AND IS AVAILABLE IN TWO MODELS: DIRECT TYPE - FOR PAINT, VARNISH, LACQUER, TEFLON AND SIMILAR INSULATING COATINGS OR LEAD ON COPPER OR ALUMINIUM; AND INDIRECT TYPE - FOR NICKEL, ZINC, TIN, CADMIUM, COPPER ON STEEL. THREE TYPES OF PROBES - STANDARD, MICRO AND INSIDE TYPES ARE AVAILABLE TO SUIT EVERY APPLICATION. TECHNICAL SPECIFICATIONS: MODEL: DR DIRECT TYPE STANDARD RANGE: FOUR RANGES 0-50, 100, 200 AND 400 MICRONS READOUT: 12.5 MM HEIGHT, 3 DIGIT LED DISPLAY ACCURACY: ± 10 PERCENT OF READING BEYOND 3 MICRONS WITH STANDARD PROBE PROBES: STANDARD (6MM FLAT SURFACE) POWER: 230/110V, 50/60 HZ AC, SINGLE PHASE, 12VA DIMENSIONS: 21 CM WIDTH X 28 CM DEPTH X 9.5 CM HEIGHT WEIGHT: 2.5 KG MAXIMUM
|
|
STATIC CHARGE METER - SCM - MUMBAI-BASED ELECTRONIC ENTERPRISES (INDIA) PVT LTD MANUFACTURES STATIC CHARGE METER - SCM-1, WHICH IS AN EFFECTIVE TEST AND MEASUREMENT EQUIPMENT TO MONITOR STATIC CHARGE. STATIC CHARGE METER PROVIDES FAST AND EASY MEASUREMENT OF STATIC CHARGES AND IDENTIFIES THE POLARITY, IT IS COMPACT LIGHTWEIGHT, BATTERY OPERATED UNIT OF NON-CONTACT TYPE AND EASY- TO-HANDLE. THIS INSTRUMENT ENABLES QUICK DETECTION AND MEASUREMENT OF STATIC POTENTIALS AND IS AVAILABLE IN A TECHNICAL SPECIFICATIONS: RANGE: ± 2.5 KV @ 2.5 CM; ± 5 KV @ 5.0 CM CALIBRATION DISTANCE: 2.5 CM ACCURACY: ± 10 PERCENT POWER: TWO 9V BATTERIES EVEREADY 216 OR EQUIVALENT MECHANICAL DIMENSIONS: 150 X 80 X 60 MM3 WEIGHT: 700 GMS
|
|
COMPONENT TESTER - PCT - PARA ELECTRONICS OFFERS DISCRETE SEMICONDUCTOR COMPONENT TEST SYSTEM. MODEL PCT- 1 IS CAPABLE OF MEASURING VARIOUS PARAMETERS OF COMPONENTS LIKE DIODES, SIGNAL TRANSISTORS, ZENERS, THREE-PIN REGULATORS, ETC AND WORKS WITH ANY IBM COMPATIBLE PC. PCT-1 AND IS TWO PROGRAMMABLE PULSED POWER SUPPLIES FOR INPUT/BASE DRIVE AND FOR OUTPUT/COLLECTOR DRIVE. THESE DRIVES ARE CONTROLLED THROUGH PC WITH TWO PC INSERTABLE CARDS THAT CONTROL THE DRIVE AND MEASUREMENT PARAMETERS. THE RELAY BOARD IN CONJUNCTION WITH THE TEST STATION CONNECTS THE REQUIRED VOLTAGES TO A THREE PIN DEVICE UNDER TEST. THE MEASUREMENT BOARD WITH ADC/ DACS MEASURES AND SETS CONTROL SIGNALS AND COMES IN USER FRIENDLY, MENU DRIVEN SOFTWARE FOR EASE IN HANDLING THE SYSTEM. IT IS CAPABLE OF MEASURING LEAKAGE, BREAKDOWN, SATURATION, AND GAIN OF VARIOUS SEMICONDUCTOR DEVICES WITH USER SELECTABLE/SETTABLE PARAMETERS AND ALSO CAPABLE OF PLOTTING CURVES.
|
|
ELECTROMETER - PEM - ELECTROMETER FROM MUMBAI-BASED ELECTRONIC ENTERPRISES (INDIA) PVT LTD IS A SELF-CONTAINED, MAINS OPERATED UNIT IN A LIGHTWEIGHT ENCLOSURE AND IS IDEAL FOR LOW CURRENT MEASUREMENTS SUCH AS SURFACE RESISTIVITY AND VOLUME RESISTIVITY OF INSULATING MATERIALS. IT CAN ALSO BE USED FOR THE MEASUREMENT OF ATMOSPHERIC ION CURRENT. TECHNICAL SPECIFICATIONS: MEASURES CURRENTS FROM PICO-AMPS TO NANO-AMPS INPUT IMPEDENCE: 1012 OHMS WITH A RANGE LIKE SELECTABLE BY FRONT PANEL 3 POSITION BAND SWITCH RANGE ACCURACY: 0-10PA RANGE ±15 PERCENT INDICATOR: 270º TAUT BAND PANEL METER OUTPUT VOLTAGE: 0-1000V, DC, 1 MA MAXIMUM OUTPUT CONTROL: 10-TURN HELIPOT, ADJUSTABLE FROM 0-1000V RIPPLE: 10MVP-P OUTPUT PROTECTION: SHORT CIRCUIT PROTECTED MECHANICAL DIMENSIONS – MM3: 210WX130HX280D AND WEIGHS APPROXIMATELY 2 KG ELECTRICAL: 240V ± 10 PERCENT 50HZ AC 5VA MAXIMUM
|
|
ALPHAMETER - MUMBAI-BASED ELECTRONIC ENTERPRISES OFFERS ALPHAMETERS BASED ON THE PRINCIPLE OF ELECTRO-MAGNETISM. THE ELECTROMAGNETIC PROBE WHEN BROUGHT NEAR THE MAGNETIC BASE AND STEEL, MAGNETIC FIELD IS SET UP IN THE BASE AND THE FIELD STRENGTH IS SENSED AND DISPLAYED IN TERMS OF MICRONS. THIS INSTRUMENT IS SUITABLE FOR THICKNESS MEASUREMENT OF PAINT, VARNISH, LACQUER, TEFLON, PLASTIC, RUBBER, ZINC, TIN, CADMIUM, LEAD OR ANY OTHER NON-MAGNETIC COATING ON STEEL. TECHNICAL SPECIFICATIONS: READOUT: 12.5 MM HEIGHT, 3 DIGIT LED DISPLAY AND RANGES AVAILABLE ARE: 20-100, 100-999, 0-50 AND 0-100 MICRONS RESOLUTION: 1-100 MICRONS; 5-400 MICRONS; 10 TO 400 MICRONS AND ABOVE ACCURACY: ±5 PER CENT OF READING FOR 20-100 MICRON RANGE; ± 10 PER CENT OF READING BEYOND 10 MICRON ON ALL OTHER RANGES POWER: 230/110V; 50/60 HZ AC, SINGLE PHASE, 12 VA DIMENSIONS: 21CMS WIDTH X 28 CMS DEPTH X 95 CMS HEIGHT WEIGHT: 2.5 KGS M-AXIMUM.
|
|
HIGH OUTPUT ACCELEROMETER - 352A - PCB PIEZOTRONICS, USA, OFFERS MODEL 352A22 MINIATURE ACCELEROMETER FOR MEASURING SHOCK AND VIBRATION ON LIGHTWEIGHT STRUCTURES OR IN CONFINED PLACES. ICP SIGNAL CONDITIONING MICROELECTRONICS BUILT-IN FOR HIGH OUTPUT, GIVES A HIGH SIGNAL TO NOISE RATIO AND THE RESOLUTION IS OF THE ORDER OF 0.00159. DUE TO MINIATURE SIZE, LIGHTWEIGHT (1/2 G) AND ADHESIVE INSTALLATION, IT HAS AN ADDED ADVANTAGE IN MEASURING VIBRATION AT INACCESSIBLE PLACES. THE INTEGRAL CABLE ASSEMBLY PROVIDES FOR DIRECT ANALYSIS THROUGH FFT ANALYSERS, VIBRATION METERS AND DATA COLLECTORS AND A VARIETY OF SIGNAL CONDITIONERS ARE ALSO AVAILABLE FOR INTERFACING TO ANY VOLTAGE READOUT. GENERAL RANGE IS BETWEEN 5 HZ AND 800 HZ AND IS IDEAL FOR TESTING PCB'S DISK DRIVE MECHANISM AND OTHER SUCH SMALL COMPONENTS AND CAN WITHSTAND TEMPERATURE UP TO 121°C.
|
|
HIGH SENSITIVITY ACCELEROMETER - MODEL 353B - THE MODEL 353B33 FROM PCB PIEZOELECTRONICS, INC, USA, IS A QUARTZ SHEAR ICP ACCELEROMETER DESIGNED FOR GENERAL PURPOSE MEASUREMENTS HAVING A SENSITIVITY OF 100 MV/G. THE QUARTZ SHEAR MODE SENSING ELEMENTS REDUCE SENSITIVITY TO ADVERSE ENVIRONMENTAL INPUTS, SUCH AS THERMAL TRANSIENTS, BASE STRAIN, AND TRANSVERSE MOTION WITH A FREQUENCY RANGING BETWEEN 1 TO 4,000 HZ (±5%), MAKES THIS SENSOR AN IDEAL CANDIDATE FOR VIBRATION MEASUREMENTS IN COMPRESSORS, MOTORS, PUMPS, AND OTHER GENERAL VIBRATION TESTS.
|
|
HIGH-G SHOCK ACCELEROMETER - MODEL 350B - THE MODEL 350B02 SHOCK ACCELEROMETER FROM PCB PIEZOTRONICS, USA, MEASURES HIGH-G ACCELERATIONS ASSOCIATED WITH PYROSHOCK AND HIGH-LEVEL MECHANICAL IMPACTS. MECHANICAL AND ELECTRICAL FILTERS PREVENT EXCITATION OF THE SENSING ELEMENT DUE TO HIGH-FREQUENCY INPUT WITH AN BUILT-IN MICROELECTRONICS PROVIDING A LOW-IMPEDANCE SIGNAL CAPABLE OF BEING TRANSMITTED OVER LONG CABLE LENGTHS WITH VIRTUALLY NO DEGRADATION IN SIGNAL QUALITY. CONSTRUCTED WITH A CERAMIC SHEAR SENSING ELEMENT, THIS SENSOR PROVIDES A SENSITIVITY OF 0.1 MV/G WITH A MEASUREMENT RANGE OF 50,000 G. THE UNIT IS CASE ISOLATED TO PREVENT GROUND-LOOP PROBLEMS.
|
|
HIGH-TEMPERATURE CHARGE OUTPUT ACCELEROMETER - 357B - THE 357B03 FROM PCB PIEZOTRONICS, USA, IS A GENERAL PURPOSE CHARGE MODE ACCELEROMETER THAT OFFERS A WELL-BALANCED BLEND OF PERFORMANCE FEATURES, MAKING IT A POPULAR CHOICE FOR THOSE APPLICATIONS REQUIRING A HIGH-TEMPERATURE (495°F) SENSOR AND ITS SHEAR MODE-SENSING ELEMENT REDUCES SENSITIVITY TO ADVERSE ENVIRONMENTAL INPUTS. SMALL SIZE, BROAD FREQUENCY RESPONSE (RANGING TO 9000 HZ, ±5%), AND DURABILITY OFFER VERSATILITY FOR A WIDE RANGE OF APPLICATIONS WITH A SENSITIVITY LEVEL UPTO 10 PC/G. A TOP-CONNECTOR VERSION IS ALSO AVAILABLE FINDING POPULAR USAGE IN THERMAL CHAMBERS AND AUTOMOTIVE ENGINE TESTS.
|
|
MINIATURE CHARGE OUTPUT ACCELEROMETER - MODEL 357B - WEIGHING 1 GRAM (0.035 OZ), THE MODEL 357BLO ACCELEROMETER FROM PCB PIEZOTRONICS, INC, USA, OFFERS A LIGHT-WEIGHT SOLUTION FOR TESTING SMALL OBJECTS OR TESTING IN CONFINED OR RESTRICTED AREAS HAVING TEMPERATURES RANGING FROM - 100 TO +350°F (-73 TO +177°C). THE UNIT FEATURES A 1.5 PC/ G (0, 15 [M/S²]) SENSITIVITY WITH A FREQUENCY RANGE (±5%) OF > L0,000 HZ AND IS GROUND ISOLATED AND IS AVAILABLE WITH AN OPTIONAL POSITIVE POLARITY OUTPUT. A UNIQUE ANNULAR SHEAR CERAMIC SENSING ELEMENT DESIGN MECHANICALLY FASTENS THE INTERNAL COMPONENTS TOGETHER WITHOUT THE USE OF EPOXY, YIELDING A MORE DURABLE, RUGGED, AND LINEAR ACCELEROMETER. THE ATTACHED 10 FT (3 M) CABLE TERMINATES IN A 1 0-32 COAXIAL PLUG.
|
|
MINIATURE HIGH-FREQUENCY ACCELEROMETER - 3538 - THE 353817 FROM PCB, USA, IS A HIGH-PRECISION, LIGHTWEIGHT ACCEL-EROMETER THAT UTILIZES A QUARTZ SHEAR SENSING ELEMENT TO PROVIDE REPEATABLE AND RELIABLE VIBRATION MEASUREMENTS. THE SHEAR MODE-SENSING ELEMENT OFFERS REDUCED SENSITIVITY TO THERMAL TRANSIENTS AND BASE STRAIN AND ITS SMALL SIZE ALLOWS INSTALLATION IN CONFINED OR SPACE-RESTRICTED AREAS. A LIGHTWEIGHT TITANIUM HOUSING AND MINIATURE SENSING ELEMENT MINIMIZE EFFECTS OF MASS LOADING OF THE TEST STRUCTURE WITH A MASS OF 0.06 OZ (1.7 G). THIS UNIT IS IDEAL FOR MEASURING HIGHER FREQUENCY VIBRATIONS AS WELL AS FOR USE IN VARIOUS SHOCK APPLICATIONS WITH A SENSITIVITY OF 10 MV/G AND WIDE FREQUENCY RANGE OF 1 TO 10,000 HZ (15%) SUIT MOST APPLICATIONS, SUCH AS NOISE, VIBRATION, AND HARSHNESS (NVH), DROP TESTING, GEAR MESH, AND OTHER GENERAL PURPOSE VIBRATION MEASUREMENTS.
|
|
MINIATURE LIGHTWEIGHT ACCELEROMETER - MODEL 352A - WEIGHING JUST 0.7 GRAMS, MODEL 352A 10 FROM PCB IS THE WORLD'S SMALLEST, HERMETICALLY SEALED, SHEAR-STRUCTURED ICP ACCELEROMETER AND PROVIDES A 10 MV/G OUTPUT OVER A BROAD FREQUENCY RANGE FROM 2 TO 25,000 HZ (±10%). IT WORKS WELL FOR SUCH APPLICATIONS AS PRINTED CIRCUIT BOARD TESTING, SCALE MODEL TESTING, DISK DRIVE TESTING, COMPONENT TESTING, DROP TESTING, AND FAN OR COMPRESSOR BLADE TESTING.
|
|
MINIATURE LOW PROFILE ACCELEROMETER - MODEL 352B - MINIATURE ACCELEROMETERS FROM PCB PIEZOTRONICS, USA, ARE DESIGNED SPECIFICALLY TO MEET MINIMUM SIZE AND WEIGHT REQUIREMENTS. MODEL 352B22 OFFERS A 5 TO 8,000 HZ (15%) FREQUENCY RANGE AND A SENSITIVITY OF 10 MV/G AND COMES WITH A MASS OF ONLY 0.017 OZ (0.45 G), THIS SENSOR EXCELS IN TESTING OF LIGHTWEIGHT, FLEXIBLE STRUCTURES, SUCH AS PRINTED CIRCUIT BOARDS, DISK DRIVES, AND THOSE REQUIRING A LOW-PROFILE UNIT AND UTILIZES A LIGHTWEIGHT, USER-REPAIRABLE CABLE AND IS INTENDED TO BE ADHESIVELY MOUNTED.
|
|
MINIATURE TRIAXIAL ACCELEROMETER - MODEL 356A - THE MODEL 356A 11 FROM PCB PIEZOTRONICS IS A MINIATURE, FOUR-GRAM, HERMETICALLY SEALED TITANIUM ACCELEROMETER. THE HERMETIC TITANIUM CASE PROVIDES A RUGGED, RELIABLE SENSOR FOR MINIMAL MASS LOADING IN TRIAXIAL VIBRATION MEASUREMENTS AND THE 10 MV/G OUTPUT FROM A CERAMIC SHEAR MODE SENSING ELEMENT PROVIDES A WIDE MEASUREMENT RANGE FROM 2 TO 10,000 HZ (±5%) IN THE 2 AXIS AND 2 TO.7,000 HZ (±5%) IN THE X AND Y AXES. THE 10-FT INTEGRAL SHIELDED CABLE TERMINATES IN A FOUR-PIN CONNECTOR AND IS USED IN DROP TEST AND TESTING.
|
|
CAPACITIVE 100 MV/G ACCELEROMETER - THE CAPACITIVE ACCELEROMETER FROM PCB PIEZOTRONICS, USA, MEASURES LOW-LEVEL ACCELERATION AT LOW FREQUENCY AND MEASURES UNIFORM ACCELERATION AND FEATURES 100 MV/G SENSITIVITY, 0 TO 300 HZ (±5%) FREQUENCY RANGE, AND A MEASUREMENT RANGE OF ±20 G PK. THE DAMPING RATIO OPTIMIZES PHASE AND MAGNITUDE RESPONSE OVER THE WIDE OPERATING RANGE AND A WELDED TITANIUM FOUR-PIN CONNECTOR OFFERS THE CONVENIENCE OF A DETACHABLE CABLE. TYPICAL APPLICATIONS INCLUDE RIDE COMFORT TESTING, CIVIL STRUCTURE TESTING, AND STRUCTURAL ANALYSIS.
|
|
THREE-COMPONENT FORCE SENSOR - THE 3-COMPONENT FORCE SENSOR FROM PCB PIEZOTRONICS, INC, USA, SIMULTANEOUSLY MEASURES FORCE IN THREE ORTHOGONAL DIRECTIONS, EACH SENSOR IS STRUCTURED WITH A QUARTZ ELEMENT THAT PROVIDES LONG TERM STABILITY, HIGH STIFFNESS AND A WIDE DYNAMIC RANGE. IT FEATURES RUGGED, WELDED HERMETIC STAINLESS STEEL CONSTRUCTION AND THIS 3-COMPONENT FORCE SENSOR IS COMMONLY USED FOR MONITORING CUTTING TOOL FORCES, MODAL ANALYSIS, ENGINE MOUNT ANALYSIS, BIOMECHANICS AND IMPACT TESTING AND IS AVAILABLE IN DIFFERENT SIZES LE TO MEET A WIDE RANGE OF MEASUREMENT NEEDS.
|
|
MOISTURE MEASURING INSTRUMENT - SHAW MOISTURE METERS MANUFACTURES INSTRUMENTS FOR MEASURING MOISTURE IN GASES IN PARTS PER MILLION. MODEL SDA IS DESIGNED FOR WALL OR PANEL MOUNTING AND GIVES DIRECT INDICATION OF AIR OR GAS MOISTURE CONTENTS IN PARTS PER MILLION AND IN DEW POINT TEMPERATURE WITH ANALOGUE OF 0-100 MV OR 4-20 MA OUTPUT SIGNAL. ALARMS, FULLY ADJUSTABLE OVER THE COMPLETE RANGE WITH TWO SEPARATE SINGLE POLE WITH CHANGEOVER CONTACT RATED AT 3 A, 240 V, ARE AVAILABLE, WHILE THE SENSOR USED IS THE SHAW SENSOR WITH AUTOMATIC CALIBRATION SYSTEM WHICH ENABLES THE INSTRUMENT AND SENSOR TO BE CALIBRATED IN LESS THAN 1 MINUTE, EVEN BY UNSKILLED PERSONNEL WITHOUT THE NEED FOR ANY OTHER EQUIPMENT.
|
|
MASS FLOWMETER - H - TELEDYNE BROWN ENGINEERING HASTINGS INSTRUMENTS, USA, MANUFACTURES MASS FLOWMETERS. MODEL HFM IS USEFUL FOR LEAK TESTING, VAPOUR DEPOSITION AND OTHER CRITICAL APPLICATIONS AND HAS PROVEN RELIABILITY AND A WIDE RANGE OF CAPACITIES WITH TEMPERATURE COMPENSATION AND RESPONSE TIME MAKE IT SUITABLE FOR MANY OTHER APPLICATIONS ALSO. IT IS COMPACT IN SIZE WITH A 15-PIN SUBMINIATURE D CONNECTOR AND MAKES INTEGRATION AND CONNECTION WITH ELECTRONICS SYSTEM SIMPLE. THE RANGES AVAILABLE ARE FROM AS LOW AS 0- 10 SCCM TO A HIGH-FLOW RANGE OF 0-500 SLPM AND COME WITH STANDARD PRESSURE RATING OF 500 PSIG AND OPTIONAL 4-20 MA OUTPUT. HIGHER PRESSURE UNITS OF 1,500 ARE ALSO AVAILABLE.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
