|
|
Instrumentation & Control Equipments
|
Suppliers Directory
|
FINE SPAVY ASSOCIATES & ENGINEERS PVT LTD
| | Address : |
C 45/2 MIDC AREA |
| Telephone : |
0233 344332, 344532 |
| Fax : |
91 233 344334 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
AUTOMATIC OPTICAL BRINELL HARDNESS TESTER - MODEL OPFA-30 -
MODEL OPFA-3000 HAS BEEN DESIGNED FOR PRODUCTION TESTING OF CAST OR FORGED COMPONENTS, LEAF SPRINGS, ETC, FOR BRINELL HARDNESS VALUE HIGH SPEED TEST RESULTS AS OPERATIONS ARE FAST AND AUTOMATIC WITH LESS OPERATOR FATIGUE AND THE CYCLE TIME (EXCEPT LOADING/UNLOADING) IS ABOUT 12 SECONDS PER TEST. ITS SPECIFICATIONS ARE: LOAD,STAGES-750 KG AND 3,000 KG; MACHINE FRAME: (C TYPE); OPTICAL MEASURING EQUIPMENT IS WITH 14X MAGNIFICATION; HYDRAULIC SYSTEM FOR THE OPERATION OF MACHINE; AND POWER SUPPLY: 3-PH, 440 V, 50 HZ AC. THE JOB IS TO BE KEPT ON THE TABLE AND THE CYCLE START BUTTON IS TO BE OPERATED, THE JOB IS CLAMPED; LOADING OF TEST LOAD, UNLOADING IS DONE, AND THE IMPRESSION IS VISIBLE ON SCREEN. AFTER THE MEASUREMENT OF IMPRESSION, DECLAMP BUTTON IS TO BE PRESSED AND THE JOB GETS INTO ITS ORIGINAL POSITION AND THE MACHINE IS SUITABLE FOR FOUNDRIES, AND ENGINEERING INDUSTRY ON PRODUCTION LINE.
|
|
BRINELL HARDNESS TESTER, OPTICAL - FINE SPAVY ASSOCIATES OFFERS AN AUTOMATIC OPTICAL BRINELL HARDNESS TESTER, DESIGNED FOR PRODUCTION TESTING OF CAST OR FORGED COMPONENTS, LEAF SPRINGS, ETC, FOR BRINELL HARDNESS VALUE. SINCE MOST OF THE OPERATIONS ARE FAST AND AUTOMATIC, THE TEST SPEED IS HIGH WITH LESS OPERATOR FATIGUE AND THE CYCLE TIME (EXCEPT LOADING/UNLOADING) IS ABOUT 12 SECONDS PER TEST. SPECIFICATIONS OF THE MACHINE: LOAD STAGES - 750 KG AND 3,000 KG; MACHINE FRAME (C-TYPE); OPTICAL MEASURING EQUIPMENT WITH 14X MAGNIFICATION; HYDRAULIC SYSTEM FOR OPERATION OF MACHINE; AND, POWER SUPPLY 3-PHASE 440 V, 50 HZ AC. THE MACHINE IS AUTOMATIC - PLACE THE JOB ON THE TABLE AND OPERATE THE CYCLE START BUTTON AND THE JOB IS CLAMPED, THE LOADING AND UNLOADING OF TEST LOAD IS DONE AND THE IMPRESSION IS VISIBLE ON SCREEN. AFTER THE MEASUREMENT OF IMPRESSION, THE DECLAMP BUTTON IS TO BE PRESSED TO GET THE JOB INTO ITS ORIGINAL POSITION AND IS SUITABLE FOR FOUNDRIES AND ENGINEERING INDUSTRIES ON
PRODUCTION LINE.
|
|
HARDNESS TESTER - FMV - FINE SPAVY ASSOCIATES & ENGINEERS OFFERS THE MICRO VICKERS HARDNESS TESTER, MODEL FMV-1 WITH SEVERAL APPLICATIONS: FINISHED COMPONENTS (THIN SHEETS, FINE WIRES, ETC); WATCH PARTS LIKE SPRINGS, PIVOT BEARINGS, GEARS, CUTTING EDGE OF RAZOR BLADES, DRILLS, FILE TEETH, METALLIC FOILS, SURGICAL NEEDLES, PEN POINTS, ETC; STUDY OF SURFACE COATINGS LIKE ELECTROPLATED COATINGS, EXTREMELY THIN CASE HARDENED PARTS, ANODIZED CASTINGS OF ALUMINIUM, SHOT BLASTING OR ROLLED FACES; HEAT TREATMENT EFFECTS LIKE TEMPERING OF STEEL, HARDNESS OF VISIBLE PRECIPITATED PARTICLES, HARDNESS OF AUSTENITIC AND MARTENSITIC AREAS, HOMOGENIZATION TREATMENT; AND, ALLOY CONSTITUTIONAL PROBLEMS, (MICRO INDENTATION TESTS IN STUDY OF EQUILIBRIUM DIAGRAM), MUTUALLY SOLUBLE/INSOLUBLE MATERIALS, HARDNESS OF COMPLEX CARBIDES AND HARDNESS OF COMPONENTS OF MICROSTRUCTURE. ITS SALIENT FEATURES INCLUDE PERFECTLY BALANCED MAIN LEVER SUPPORTED ON FINE KNIFE EDGES TO RENDER HIGH ACCURACY EVEN AT VERY SMALL LOADS; LOAD APPLICATION, HOLDING THE LOAD FOR SOME TIME AND RELEASE OF LOAD IS AUTOMATICALLY DONE BY MEANS OF A COMBINATION OF LEVERS AND DAMPER; THE TIME FOR HOLDING THE LOAD CAN BE ADJUSTED; A PRECISION DIAMOND INDENTOR ISUSED TO MAKE SHARP INDENTATIONS; X-Y STAGE CAN MOVE THE JOB AS PER REQUIREMENT; A RANGE OF TEST LOADS CAN BE USED TO SUIT PART CULAR APPLICATION; LOADS SMALLER THAN 100 GM ARE DIRECTLY PLACED ON THE PAN FIXED ON MAIN LEVER; LOADS GREATER THAN 200 GM ARE PLACED ON THE HANGER ATTACHED TO MAIN LEVER; AND, MAGNIFICATION FROM 125X TO 625X AVAILABLE.
|
|
HARDNESS TESTER - FSA OFFERS MICRO VICKERS HARDNESS TESTER FOR TESTING OF THIN SHEETS, HEAT TREATED PARTS, FINISHED COMPONENTS, WATCH PARTS, CUTTING EDGES OF RAZORS, ETC AS WELL AS TO STUDY OF SURFACE COATINGS LIKE ELECTROPLATING. THE MACHINE IS MECHANICALLY OPERATED WITH THE HELP OF LEVERAGE SYSTEM AND THE LOAD APPLICATION, DWELL AND RELEASE OF LOAD IS AUTOMATIC. A PRECISION DIAMOND INDENTOR IS PROVIDED. LOADS ARE AVAILABLE FROM 10 GM TO 1,000 GM AND IMPRESSION CAN BE MEASURED WITH THE HELP OF A MICROSCOPE HAVING TOTAL MAGNIFICATION 125X, 250X AND 625X. X-Y STAGE WITH LEAST COUNT 0.01 MM IS PROVIDED AND THE MACHINE CAN BE SUPPLIED WITH DIFFERENT ACCURACY TO SUIT SPECIAL TYPE OF SPECIMEN.
|
|
HARDNESS TESTER - FINE SPAVY ASSOCIATES MANUFACTURES MICRO VICKERS HARDNESS TESTERS WITH A WIDE RANGE OF APPLICATIONS IN THE FOLLOWING FIELDS: 1) FINISHED COMPONENTS (THIN SHEETS, FINE WIRES, ETC), WATCH PARTS LIKE SPRINGS, PIVOT BEARINGS, GEARS, CUTTING EDGE OF RAZOR BLADES, DRILLS, FILE TEETH, METALLIC FOILS, SURGICAL NEEDLES, PEN POINTS AND SO ON; 2) STUDY OF SURFACE COATINGS; 3) HEAT TREATMENT EFFECTS LIKE TEMPERING OF STEEL; AND, 4) ALLOY CONSTITUTIONAL PROBLEMS, HARDNESS OF COMPONENTS OF MICROSTRUCTURE, ETC. ITS SALIENT FEATURES ARE: PREFECTLY BALANCED MAIN LEVER SUPPORTED ON FINE KNIFE EDGE TO RENDER HIGH ACCURACY EVEN AT VERY SMALL LOADS; LOAD APPLICATION, HOLDING THE LOAD FOR SOME TIME AND RELEASE OF LOAD IS AUTOMATICALLY DONE BY MEANS OF COMBINATION OF LEVERS AND DAMPER; A PRECISION DIAMOND INDENTER IS USED TO MAKE SHARP INDENTATIONS; X-Y STAGE CAN MOVE THE JOB AS PER REQUIREMENT. A RANGE OF TEST LOADS CAN BE USED TO SUIT PARTICULAR APPLICATIONS; AND, MAGNIFICATION FROM 125X TO 625X AVAILABLE AND THE TESTER IS EQUIPPED WITH A HOST OF STANDARD AND OPTIONAL ACCESSORIES.
|
|
SPRING TESTING MACHINE - FSA MANUFACTURES LAMINATED SPRING TESTING MACHINES IN CAPACITIES RANGING FROM 100 TO 500 KN AND HAVE AN ACCURACY OF ± 1% FROM 20% TO 100% OF EACH SELECTED RANGE. EACH MODEL HAS 3 RANGES TO ATTAIN BETTER ACCURACY AND ARE OFFERED WITH TABLE SIZE TO SUIT MOST OF THE LAMINATED SPRINGS. OTHER FEATURES ARE: DEFLECTION MEASUREMENT-DIGITALLY WITH THE LEAST COUNT OF 0.1 MM; LOAD INDICATIONS LARGE DIAL WITH MAIN AND DUMMY POINTER TO INDICATE THE LOAD; AND FOR SAFETY-OVERLOAD AND OVERTRAVEL LIMIT SWITCHES ARE PROVIDED AND ITS TRANSMISSION OF LOAD IS HYDRAULIC AND LOAD MEASUREMENT IS DONE WITH THE HELP OF A PENDULUM DYNAMOMETER SYSTEM. THE TROLLEYS ARE DESIGNED TO ACCOMMODATE A WIDE RANGE OF SIZES OF THE EYES OF LAMINATED SPRINGS AND THE LOADING BLOCK AUTOMATICALLY CENTRES THE LAMINATED SPRINGS TO BE TESTED. THE INCREASE IN LENGTH OF THE SPRING IS TAKEN BY THE SMOOTH MOVEMENT TROLLEY OVER THE TABLE, MAKING THE MACHINES SUITABLE FOR TESTING ALL TYPES OF LAMINATED SPRINGS AND USEFUL IN LAMINATED SPRING MANUFACTURE, AUTO INDUSTRY, RESEARCH ORGANISATIONS, AND EDUCATIONAL INSTITUTIONS.
|
|
TENSILE TESTING MACHINE - FINE SPAVY ASSOCIATES & ENGINEERS PVT LTD MANUFACTURES TENSILE TESTERS IN CAPACITIES FROM 20 KGF (200 N) TO 5,000 KGF (50 KN AND ARE CAPABLE OF CONDUCTING TENSILE TEST, CROSS BREAKING TEST, BEND TEST, ADHESION STRENGTH TEST, ETC, FOR A RANGE OF MATERIALS LIKE PAPER, TEXTILES, RUBBER, PLASTICS, AND METALLIC MATERIALS, IN VARIOUS FORMS SUCH AS TAPES, WIRES, CORDS, ROUND, AND FLAT. THESE MACHINES CATER TO THE NEEDS OF A NUMBER OF INDUSTRIES RANGING FROM RUBBER, PLASTIC, ADHESIVE TAPE MANUFACTURERS, NONFERROUS FOUNDRIES, TO WIRE AND CABLE MANUFACTURES. EACH MACHINE HAS 3 LOAD RANGES TO COVER MAXIMUM POSSIBLE TEST LOADS WITHIN ± 1% ACCURACY WHICH IS THE REQUIREMENT AS PER IS: 1828 AND THE STRAINING RATES CAN BE OPTED AS PER TESTING APPLICATIONS. A WIDE CHOICE OF GRIPS AND TEST FIXTURES IS AVAILABLE, AS THERE ARE A NUMBER OF DIFFERENT TEST SPECIMENS REQUIRED TO BE TESTED ON THESE MACHINES. THESE MACHINES, BEING MECHANICAL TYPE, ARE EXTREMELY COST EFFECTIVE AND THE LOAD MEASUREMENT IS BASED ON THE PENDULUM DYNAMOMETER PRINCIPLE. THE LOAD VERSUS ELONGATION GRAPH CAN BE OBTAINED ON THE RECORDER AND MACHINES WITH ELECTRONIC VERSION ARE ALSO AVAILABLE.
|
|
TORSION TESTING MACHINE -
FINE SPAVY ASSOCIATES & ENGINEERS PVT LTD PRODUCES TORSION TESTING MACHINES IN CAPACITIES FROM 10 KG M TO 200 KG M AND ARE SUITABLE FOR TESTING METALLIC BARS, RODS IN ROUND AS WELL AS FLAT SHAPES UNDER TORSION. THE TORQUE VERSUS ANGULAR TWIST CAN BE OBTAINED. WIDE RANGES AVAILABLE ON THE MACHINE ENABLE THE MEASUREMENT OF TORQUE WITHIN ± 1%. THE MEASUREMENT OF TORQUE IS DONE ON THE PRINCIPLE OF THE PENDULUM DYNAMOMETER. IN ORDER TO ACCOMMODATE DIFFERENT SIZES OF SPECIMENS, SUITABLE JAW INSERTS ARE PROVIDED AND ARE USEFUL FOR RESEARCH LABORATORIES, ENGINEERING COLLEGES, AND POLYTECHNICS.
|
|
DEEP THROAT BRINELL HARDNESS TESTER - FINE SPAVY ASSOCIATES & ENGINEERS PVT LTD OFFERS DEEP THROAT BRINELL HARDNESS TESTER WITH ROLLER CONVEYOR HAVING MAJOR TECHNICAL SPECIFICATIONS LIKE VERTICAL HEIGHT X THROAT: 610 X 619 MM; RAM SPEED: DOWNWARD STROKE: 600 MM/MIN; UPWARD STROKE: 1,800 MNV MIN;,ROLLER TABLE: 1,000 MM X 600 MM; CROSS TRAVEL OF ROLLER TABLE: 600 MM; AND JOB WEIGHT: 500 KG (CAN BE ENHANCED IF REQUIRED). HEAVY JOBS LIKE CASTINGS, FORGED PARTS AND JOBS OF ANY SIZE AND SHAPE WHICH CANNOT BE ACCOMMODATED ON CONVENTIONAL MACHINES, INDUSTRIES LIKE FOUNDRIES, FORGING PLANTS, AUTO AND ENGINEERING INDUSTRIES CAN HAVE APPLICATIONS FOR THIS MACHINE.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
