|
|
Instrumentation & Control Equipments
|
Suppliers Directory
|
INDUSTRIAL CONTROLS & DRIVES (INDIA) PVT. LTD.
| | Address : |
METTUKUPPAM ROAD (VIA ALAPAKKAM ROAD), MADURAVOYAL, |
| Telephone : |
(044) 4871753, 4791837. |
| Fax : |
(044) 4871431. |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
ELECTRONIC TRIVECTOR METER - PCM 90 - CHENNAI-BASED INDUSTRIAL CONTROLS & DRIVES PRESENTS, ICD PCM 9006, A MICROCONTROLLER BASED HIGH PERFORMANCE DIGITAL TRIVECTOR METER SUITABLE FOR FLUSH MOUNTING ON PANEL TO DISPLAY SEVERAL ELECTRICAL PARAMETERS IN A SINGLE METER. THIS 3-PHASE AC POWER/ENERGY/MAXIMUM-DEMAND METERS AND SMART TRANSDUCERS ARE DESIGNED TO MEET THE REQUIREMENT OF METERING APPLICATIONS OF ALL KINDS AND IS DESIGNED TO BE A STAND-ALONE DIGITAL POWER/ENERGY METER OR WITH A REMOTE COMPUTER. IT ALSO DISPLAYS KVA DEMAND AND CONTROL BY ADOPTING THE PREDICTION DEMAND CONTROL TECHNIQUE AND THIS DEVICE IS CAPABLE OF COMPUTING POWER AND ENERGY IN FOUR QUADRANTS WITHIN THE ACCURACY LEVEL OF 0.5. IT OFFERS GOOD ACCURACY RATE IN ALL KINDS OF LOAD CONDITIONS RIGHT FROM 5 PERCENT OF LOAD. BEING A FOUR-QUADRANT METER, IT HAS BUILT-IN FEATURES TO RECORD EXPORT AND IMPORT ENERGIES WITHOUT CHANGING CONNECTIONS. THE PCM 9006 REGISTERS 15 OR 30 MINUTES KVA MAXIMUM DEMAND. FOR EVERY TIME SLOT WHILE COMPUTING MAXIMUM DEMAND, IT ALSO GENERATES PREDICTION DEMAND AND OPERATE RELAYS TO CONTROL DEMAND WITHIN A SET LEVEL. ALL THE ENERGY AND DEMAND PARAMETERS ARE REGISTERED IN NON-VOLATILE MEMORY CHIP WITH REAL-TIME REFERENCE, IT IS ALSO PROVIDED WITH TRIVECTOR METER WITH LED OR LCD DISPLAYS TO HAVE SIMULTANEOUS INDICATION OF SEVERAL PARAMETERS, WHICH CAN BE SELECTED AND SEEN IN AUTO/MANUAL MODE AND SEVERAL PAGES ARE BUILT-IN TO DISPLAY ALL PARAMETERS. A MEMBRANE KEYPAD IS AVAILABLE TO ENTER ALL THE PARAMETERS VIZ. CT RATIO, PT RATIO, DEMAND SETTING, TIME BASED SELECTION, AND TIME DURATION AMONG OTHERS. IT ALSO HAS A BUILT-IN ‘TIME OF DAY’ FEATURE ALLOWS 24 HOUR MONITORING AND IS DIVIDED IN FOUR ZONES - PEAK, NON-PEAK, DAY AND NIGHT, WHICH ARE PROGRAMMABLE AS PER CUSTOMER REQUIREMENTS. MAXIMUM DEMAND SETTINGS 1 AND 2 ARE PROGRAMMABLE SEPARATELY FOR PEAK AND NON-PEAK PERIODS AND THE METER ALSO HAS A FACILITY TO REGISTER ENERGY CONSUMPTIONS KVAH, KWH, KVARH AND MAX.
|
|
ICD DIGITAL POWER MULTIMETER - PRESENTING ICD DIGITAL POWER MULTIMETER SPECIALLY DESIGNED TO DISPLAY ALL ELECTRICAL PARAMETERS IN ONE SINGLE PIECE OF EQUIPMENT WITH APPLICATIONS IN DATA LOGGING, PANEL METERS IN SUB-STATIONS, POWER STATIONS AND GENSETS, TESTING OF MOTORS, COMPRESSORS, PUMPS ETC., AND INDUSTRIAL BUILDINGS AND FACTORIES. FULLY INTEGRATED WITHOUT ANY EXTERNAL TRANSDUCERS OR CONVERTERS, THIS DEVICE FEATURES A MICRO-CONTROLLER BASED CIRCUIT DESIGN WITH POWERFUL SOFTWARE BUILT-IN FOR SAMPLING VOLTAGE AND CURRENT INPUTS FOR THE MEASUREMENT OF SEVERAL AC PARAMETERS. MOREOVER, IT REPLACES THE USE OF SEVERAL METERS, LIKE VOLTMETERS, AMMETERS, WATTMETER, FREQUENCY METER, KVA METER, KVAR METER, PF METER AND SELECTOR SWITCHES FOR OPERATING THESE METERS, IN AN ELECTRICAL PANEL AND CAN BE INSTALLED IN METERING PANEL OR TEST BENCHES OF THE EQUIPMENT UNDER TEST. IT ALSO DISPLAYS ALL PARAMETERS IN SEQUENCE WHEN THE DISPLAY MODE IS SELECTED IN AUTO SCROLLING. THE CT AND PT RATIO ARE SELECTABLE THROUGH KEY SWITCHES AT THE USER END TO GET THE DISPLAY IN FULL-SCALE READING OF VOLTAGE, CURRENT AND POWER, WITHOUT HAVING ANY MULTIPLICATION FACTOR AND THE AUTO RANGING FEATURE IS ALSO INCLUDED FOR ALL PARAMETERS.
|
|
ICD ELECTRONIC ENERGY METER - PRESENTING ICD ELECTRONIC ENERGY METER IN THREE MODELS - EM 9001, EM 9003 AND EM 9004 FROM INDUSTRIAL CONTROLS & DRIVES (INDIA) PVT. LTD. THE EM 9001 HAS A MECHANICAL COUNTER, AND THE OTHER TWO MODELS ARE OFFERED WITH LED AND LCD DISPLAYS FOR SHOWING ENERGY AND POWER AND THE FULL-SCALE RANGE OFFERS MAXIMUM 7 DIGITS (9999999 COUNTS) AND HIGHER RESOLUTION CAN BE ACHIEVED UP TO 0.1KWH WITH EM 9001 AND 0.01KWH WITH THE EM 9003 AND 9004 MODELS, DESIGNED WITH PRECISION IC’S TO COMPUTE ACTIVE POWER CONSUMPTION OF THE INDUSTRIAL LOAD AT ANY POWER FACTOR UNDER BALANCED AND UN-BALANCED LOAD CONDITIONS, MAKING IT MOST SUITABLE FOR COMPUTING THE POWER CONSUMPTION RIGHT FROM 0.5 PERCENT TO 125 PERCENT OF LOAD CURRENT AND AT ANY POWER FACTOR. THE METER IS DESIGNED TO ACCEPT VOLTAGE INPUT DIRECTLY WITHOUT ANY POTENTIAL TRANSFORMER AND FOR CURRENT INPUT THROUGH PRECISION CURRENT TRANSFORMER AND HAS IN-BUILT FULL-SCALE RANGE SETTING, BY MEANS OF DIP SWITCH SET AT SITE FOR THE EM 9001 MODEL AND DIGITAL SETTINGS BY KEYPAD FOR THE EM 9003 AND 9004 MODELS AND HAS NO NEED FOR ANY MULTIPLICATION FACTOR AND DIRECT ENERGY CONSUMPTION RECORD IS AVAILABLE. THE POWER ON LED INDICATES AUXILIARY POWER AND THE FLASHING PULSE ON LED INDICATES THAT THE ENERGY INTEGRATION PROCESS IS HAPPENING AND GENERATES 10 PULSES/KWH AND A DIGITAL PULSE OUTPUT OPTICALLY ISOLATED IS AVAILABLE FOR OPERATING REMOTE COUNTER OR AS A PULSE INPUT TO EXISTING PLC OR DCS OR PC-BASED SYSTEM WITH DATA LOGGING THROUGH RS 485 SERIAL PORT SEVERAL ENERGY METERS CAN BE CONNECTED UNDER MULTI-DROP COMMUNICATION WITH A PC INTERFACE.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
