|
|
Instrumentation & Control Equipments
|
Suppliers Directory
|
M B CONTROL & SYSTEMS PVT LTD
| | Address : |
31/1 AHIRIPUKUR ROAD |
| Telephone : |
033 2478475, 2403791 |
| Fax : |
91 33 2470445 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
DIGITAL WATT-HOUR METER - PM 2 - M B CONTROL & SYSTEMS INTRODUCES THE LATEST POWER MONITORING SYSTEM (PM 295) WITH DISTURBANCE AND HARMONICS ANALYSIS. THIS MOST ADVANCED AND HIGH ACCURACY (0.2%) POWER METER OFFERS UNIQUE FEATURES AT VERY LOW PRICE. THE POWER METER (PM 295) IS IDEALLY SUITABLE FOR MONITORING OF ELECTRICAL PARAMETERS AND DISTURBANCE IN THE POWER LINES. POWER METER MODEL 295 PROVIDES DISPLAY OF ALL THE THREE PHASE ELECTRICAL PARAMETERS, IE, VOLTAGES, CURRENTS, UNBALANCED CURRENT, POWER FACTOR, ACTIVE POWER (KW), REACTIVE POWER, APPARENT POWER (KVA), ACTIVE ENERGY (KWH), REACTIVE ENERGY, APPARENT ENERGY, REQUENCY, MAX AMPS DEMAND, REACTIVE ENERGY (KVAH), RETURNED ENERGY, AND % TOTAL HARMONIC DISTORTION. IN ADDITION TO ABOVE THE POWER METER (PM 295) PROVIDES UP TO 512 KB ON BOARD NON-VOLATILE MEMORY. THIS MEMORY CAN BE USED FOR LOGGING ELECTRICAL PARAMETERS, INTERNAL, EXTERNAL EVENTS AND WAVE FORMS. WAVE FORMS CAN BE STORED DEPENDING ON EXTERNAL OR INTERNAL TRIGGERS. UP TO SIXTEEN CYCLES CAN BE STORED PRIOR TO OR AFTER THE TRIGGER. THIS ALLOWS DISTURBANCE ANALYSIS OF THE POWER LINE. THESE STORED WAVE-FORMS CAN BE VIEWED AND PLOTTED BY USE OF PC AND THE SOFTWARE AVAILABLE. THE POWER METER (MODEL PM 295) PROVIDES HARMONIC ANALYSIS TILL 39TH HARMONIC FOUR RELAY OUTPUTS, EIGHT POTENTIAL FREE INPUTS, SIXTEEN SET POINTS, EIGHT ENERGY REGISTERS, REAL TIME CLOCK AND CALENDAR, EIGHT COUNTERS, FOUR TIMER COUNTERS AND SERIAL RS-232/422/485 INTERFACE.
|
|
ELECTRICAL POWER MONITORING INSTRUMENTS - PM 1 - M B CONTROL & SYSTEMS INTRODUCES POWER MONITOR (SERIES PM-170). THIS INSTRUMENT PROVIDES DISPLAY OF THREE-PHASE VOLTAGES, THREE-PHASE CURRENTS, THREE-PHASE MAXIMUM DEMAND CURRENTS, HZ, KW, KWH, POWER FACTOR, KVAR AND KVARH. ALL POWER INPUTS TO THIS MICROPROCESSOR BASED INSTRUMENT ARE GALVANICALLY ISOLATED. ALL THE PARAMETERS ARE DISPLAYED VIA THREE DISPLAYS (EACH DISPLAY HAS FOUR DIGITS OF 12.5 MM HEIGHT). ISOLATED RS-485 INTERFACE IS PROVIDED AS AN OPTION. THE INSTRUMENT IS SCADA COMPATIBLE. SOFTWARE IS ALSO AVAILABLE FOR LOGGING DATA FROM PM-170 UNDER DOS OR WINDOWS. THE INSTRUMENT IS HOUSED IN A 144 X 144 X 90 MM PANEL MOUNTING, TOUGH PLASTIC ENCLOSURE. WEIGHT OF THE INSTRUMENT IS ONLY 1.5 KG. ITS USE SIMPLIFIES THE PANEL WIRING AND PANEL SPACE IS ALSO SAVED. MODEL PM-170 HAS DISPLAY/MONITORING FOR THREE VOLTAGES, THREE CURRENTS, KW, PF AND HZ. MODEL PM-170E PROVIDES IN ADDITION KWH, KVAR AND KVARH.
|
|
NON-CONTACT LINE TESTERS - MODEL P-89/P- - M B CONTROL & SYSTEMS INTRODUCES A RANGE OF POCKET-SIZE NON-CONTACT LINE TESTERS. MODEL P-89 DETECTS THE PRESENCE OF VOLTAGE FROM 70 TO 440 V AC WITHOUT COMING IN DIRECT CONTACT WITH THE VOLTAGE WIRES AND TERMINALS BEING TESTED. THE TESTER CAN BE USED TO SENSE VOLTAGE IN PLUG POINTS, SWLTCNES, ELECTRICAL PANELS, FUSE BOXES, LIGHTS, ETC. IT CAN ALSO BE USED TO DETECT ENERGISED CONCEALED WIRING. MODEL P-95 IS USED TO TEST ENERGISATION OF SOLENOID VALVES AND CONTACTOR COILS. THESE TESTERS ARE IDEAL FOR TESTING OF ELECTRICAL PANELS AND SOLENOID VALVES.
|
|
POWER FACTOR CONTROLLER - SERIES - M B CONTROL & SYSTEMS HAS INTRODUCES AN INTELLIGENT MULTI-STAGE POWER FACTOR CONTROLLER (SERIES S5). THIS IS AVAILABLE IN SIX STAGES AND TWELVE STAGES. THE UNIT ALSO PROVIDES DIGITAL INDICATION POWER FACTOR. REQUIRED PF AND SENSITIVITY CAN BE SET VIA THE FRONT PANEL POTENTIOMETERS. CT RATIO AND DELAY TIME CAN ALSO BE SET AT SITE. THE CAPACITOR BANK SELECTION SEQUENCE CAN BE SELECTED TO INCREASE LIFE OF CAPACITOR BANKS. THE POWER FACTOR CONTROLLER CAN BE OPERATED IN AUTO OR MANUAL MODE. TEST FEATURES ARE ALSO PROVIDED IN THE CONTROLLER. PROGRAMMED DATA IS RETAINED IN NON VOLATILE MEMORY OF THE UNIT, EVEN AFTER POWER IS SWITCHED OFF. THE UNIT PROVIDES ALARM FOR FAILURE OF CAPACITOR BANK. THIS PANEL MOUNTING (PANEL CUT OUT 138 X 138 MM, DEPTH 70 MM) CONTROLLER IS HOUSED IN STRONG ABS PLASTIC CASE. IT IS SUITABLE FOR OPERATION UP TO 60(C AMBIENT TEMPERATURE.
|
|
POWER METER - PM 1 - M B CONTROL & SYSTEMS INTRODUCES AN INTELLIGENT POWER METER, MODEL PM-171, WITH UNIQUE FEATURES. THIS COMPACT PANEL MOUNTED INSTRUMENT PROVIDES DISPLAY OF ALL THE ELECTRICAL PARAMETERS, I.E., 3-PHASE VOLTAGES, 3-PHASE CURRENTS, KVAR, PF, HZ, PHASE ROTATION, KW, KVA, IMPORT-EXPORT OF KWH, KVAH, KVARH, %THD (VOLTAGE AND CURRENT ON PER PHASE BASIS). THE POWER METER ALSO HAS MAXIMUM DEMAND BASED ON KWH, KVAH OR KVARH (BASED ON ACCUMULATED, SLIDING OR PROJECTED). THE POWER METER ALSO HAS TOU REGISTERS FOR ENERGY AND MAXIMUM DEMAND. UNIQUE FEATURE OF THE INSTRUMENT IS ON-BOARD MEMORY (512 KB NVRAM) FOR LOGGING DATA IN THE INSTRUMENT. TWO STATUS AND TWO RELAY OUTPUTS ARE ALSO PROVIDED IN THE POWER METER. THESE CAN BE USED FOR MONITORING AND CONTROLLING THE LOAD CONTROL SWITCHGEAR. THE POWER METER ALSO HAS ISOLATED RS-232/ RS- 485 INTERFACE AS STANDARD. THESE INSTRUMENTS CAN BE INTERFACED TO PC FOR DATA LOGGING AND CONTROL. REQUIRED SOFTWARE IS ALSO PROVIDED ALONG WITH THE INSTRUMENT. THIS COMPACT INSTRUMENT IS HOUSED IN MM PANEL MOUNTING, TOUGH PLASTIC ENCLOSURE. WEIGHT OF THE INSTRUMENT IS ONLY 1.5 KG MAXIMUM
|
|
PORTABLE DIGITAL INFRARED THERMOMETER - TM-9 - M B CONTROL & SYSTEMS INTRODUCES MODEL TM-908, A MICROPROCESSOR BASED INFRARED THERMOMETER THAT PROVIDES NON-CONTACT TEMPERATURE MEASUREMENT. IT IS IDEALLY SUITED FOR MEASURING TEMPERATURE IN ELECTRICAL PANELS, ROTATING DRUMS, MOVING OBJECTS, FOOD AND BEVERAGES AND NUMEROUS OTHER APPLICATIONS. RANGE OF THE INSTRUMENT IS -10 TO 300°C (14 TO 572°F), RESOLUTION IS 1°C FOR - 10 TO 300°C AND 0. 1°C FOR -10.0 TO 110.0°C. TEMPERATURE SCALE CAN BE SELECTED FOR °C OR °F. ACCURACY IS ±2% OF READING. EMISSIVITY CAN BE ADJUSTED BETWEEN 0.10 AND 0.95. MEMORY IS AVAILABLE IN THE INSTRUMENT TO STORE MAXIMUM, MINIMUM, AND AVERAGE. THE PORTABLE INSTRUMENT IS LIGHT IN WEIGHT, AND IT OPERATES ON 9 V DC BATTERY. THE INSTRUMENT IS SUPPLIED COMPLETE WITH IR SENSOR AND A CARRYING CASE.
|
|
TEMPERATURE MEASUREMENT INSTRUMENTS, NON-CONTACT TYPE - ST/MX SERI - M B CONTROL & SYSTEMS INTRODUCES THE LATEST RANGE OF NON-CONTACT TEMPERATURE MEASURING INSTRUMENTS FROM RAYTEK CORPORATION, USA. THEIR RANGE OF HANDHELD BATTERY OPERATED INSTRUMENTS ARE AVAILABLE FOR MEASURING TEMPERATURE FROM -32°C TO 3,000°C. RAYNGER ST SERIES OF HANDHELD INSTRUMENTS MEASURE TEMPERATURE FROM -32°C TO 540°C. THESE INSTRUMENTS AVAILABLE WITH OR WITHOUT LASER SIGHTING PROVIDE MINIMUM, MAXIMUM, DIFFERENCE AND AVERAGE TEMPERATURES AND DISPLAY HOLD FEATURES. RAYNGER MX SERIES OF HANDHELD INSTRUMENTS ARE SUITABLE FOR MEASURING -30°C TO 900°C. THESE INSTRUMENTS HAVE UNIQUE SIXTEEN-POINT LASER CIRCLE SPOT. AUDIBLE/VISIBLE HIGH AND LOW ALARM IS ALSO PROVIDED IN ADDITION TO MAXIMUM, MINIMUM, AVERAGE AND DIFFERENCE TEMPERATURES. OPTIONAL SERIAL RS-232 INTERFACE OR 1 MV/°C IS ALSO AVAILABLE WITH 100-POINT DATA LOGGING. DATATEMP MX SOFTWARE IS ALSO AVAILABLE FOR INTERFACING THE INSTRUMENT WITH PC AND ANALYZING THE DATA. RAYNGER 31 SERIES IS SUITABLE FOR MEASURING HIGH TEMPERATURE UP TO 3000°C. ACCURACY OF THESE INSTRUMENTS IS 1% WITH D:S RATIO OF 180:1 (FOR MODEL 1M AND 2M).
|
|
UNIVERSAL COUNTER - M B CONTROL & SYSTEMS OFFERS MICROPROCESSOR BASED UNIVERSAL COUNTERS/TIMERS THAT CAN BE USED AS COUNTERS OR TIMERS. ALL PARAMETERS ARE PROGRAMMABLE AT SITE BY USING THE FOUR FRONT PANEL KEYS. FEATURES OF THESE COUNTERS/TIMERS INCLUDE UP/DOWN COUNTING, ONE OR TWO SETPOINTS, ONE OR TWO RELAY OUTPUTS, COUNTER PRE-SCALING (UP TO THREE DECIMAL POINTS), FOUR/SIX-DIGIT DISPLAY, POWER FAIL DATA RETENTION, COUNT OFFSET FOR COUNTER AND TIMER, AND GATE INPUT FOR COUNTER. POWER SUPPLY OF 12 V DC IS ALSO AVAILABLE FOR SENSOR INPUT. FOR TIMING APPLICATIONS, THE TIMER MODE PROVIDES ONE MILLSECOND RESOLUTION. VARIOUS TIMING MODES CAN BE PROGRAMMED IN THE INSTRUMENT. THESE LOW POWER TIMERS/COUNTERS CAN BE OPERATED FROM 110 V OR 220 V AC. POWER CONSUMPTION IS ONLY 7 VA MAXIMUM. THESE INSTRUMENTS ARE HOUSED IN STRONG ABS PLASTIC ENCLOSURE. MAXIMUM WEIGHT IS 500 G. THESE COUNTERS/TIMERS ARE AVAILABLE IN SIZES 48 X 48 MM OR 48 X 96 MM. THEY ARE IDEALLY SUITED FOR MACHINERY MANUFACTURERS, PACKAGING MACHINES, LENGTH MEASUREMENT, FLOW MEASUREMENT, AND COUNTING APPLICATIONS.
|
|
UNIVERSAL COUNTER - O D EQPVTQN & U0UVGOU QHHGTU OKETQRTQEGUUQT DCUGF WPKXGTUCN EQWPVGTU/VKOGTU VJCV ECP DG WUGF CU EQWPVGTU QT VKOGTU. CNN RCTCOGVGTU CTG RTQITCOOCDNG CV UKVG D0 WUKPI VJG HQWT HTQPV RCPGN MG0U. HGCVWTGU QH VJGUG EQWPVGTU/VKOGTU KPENWFG WR/FQYP EQWPVKPI, QPG QT VYQ UGVRQKPVU, QPG QT VYQ TGNC0 QWVRWVU, EQWPVGT RTG-UECNKPI (WR VQ VJTGG FGEKOCN RQKPVU), HQWT/UKZ-FKIKV FKURNC0, RQYGT HCKN FCVC TGVGPVKQP, EQWPV QHHUGV HQT EQWPVGT CPF VKOGT, CPF ICVG KPRWV HQT EQWPVGT. RQYGT UWRRN0 QH 34 X FE KU CNUQ CXCKNCDNG HQT UGPUQT KPRWV. HQT VKOKPI CRRNKECVKQPU, VJG VKOGT OQFG RTQXKFGU QPG OKNNUGEQPF TGUQNWVKQP. XCTKQWU VKOKPI OQFGU ECP DG RTQITCOOGF KP VJG KPUVTWOGPV. VJGUG NQY RQYGT VKOGTU/EQWPVGTU ECP DG QRGTCVGF HTQO 332 X QT 442 X CE. RQYGT EQPUWORVKQP KU QPN0 9 XC OCZKOWO. VJGUG KPUVTWOGPVU CTG JQWUGF KP UVTQPI CDU RNCUVKE GPENQUWTG. OCZKOWO YGKIJV KU 722 I. VJGUG EQWPVGTU/VKOGTU CTG CXCKNCDNG KP UK1GU 6A Z 6A OO QT 6A Z B8 OO. VJG0 CTG KFGCNN0 UWKVGF HQT OCEJKPGT0 OCPWHCEVWTGTU, RCEMCIKPI OCEJKPGU, NGPIVJ OGCUWTGOGPV, HNQY OGCUWTGOGPV, CPF EQWPVKPI CRRNKECVKQPU.
|
|
PORTABLE DIGITAL THERMOMETER - DT-2 - M B CONTROL & SYSTEMS INTRODUCES LATEST PORTABLE DIGITAL THERMOMETER (MODEL DT-271). THIS BATTERY OPERATED DIGITAL INSTRUMENT USES LATEST ELECTRONICS TECHNOLOGY AND PROVIDES MANY SPECIAL FEATURES. RANGE OF THE BATTERY OPERATED INSTRUMENT IS FROM -50° TO 1,250° C. A SWITCH IS PROVIDED ON THE INSTRUMENT TO SELECT THE CENTIGRADE OR FAHRENHEIT MODE. RESOLUTION CAN ALSO BE SELECTED BETWEEN 1.0° C AND 0.L° C. PEAK DETECT AND HOLD FACILITY IS ALSO PROVIDED IN THE INSTRUMENT. THE INSTRUMENT IS AVAILABLE WITH VARIOUS TYPES OF TEMPERATURE SENSORS. PORTABLE SENSORS ARE AVAILABLE FOR TEMPERATURE MEASUREMENT OF AIR/GASES, LIQUIDS, SURFACE AND VARIOUS OTHER APPLICATIONS.
|
|
DIGITAL HYGRO-THERMOMETER - HT20 - MB CONTROL & SYSTEMS INTRODUCES DIGITAL HYGRO-THERMOMETER (MODEL HT2086). THIS BATTERY OPERATED INSTRUMENT PROVIDES DISPLAY OF ROOM TEMPERATURE AND RELATIVE HUMIDITY ON DUAL LCD DISPLAY. TEMPERATURE AND HUMIDITY SENSORS ARE IN-BUILT IN THE INSTRUMENT. THE HYGRO-THERMOMETER (MODEL HT-2086) HAS TEMPERATURE MEASURING RANGE -10&176;C TO +50&176;C WITH 0.1&176;C RESOLUTION AND HUMIDITY RANGE IS 20% TO 99% RH WITH RESOLUTION 1% RH. ADDITIONAL FEATURES OFFERED ARE: RANGE SELECTION (OC OR OF), MAXIMUM AND MINIMUM RECORD FOR TEMPERATURE AND HUMIDITY. THE INSTRUMENT ALSO HAS OPTION OF AUTO RESETTING OF MINIMUM AND MAXIMUM VALUES ON DAILY BASIS. THIS LOW COST INSTRUMENT USES VERY LESS POWER. IT OPERATES ON ONLY ONE 1.5 V BATTERY. THE INSTRUMENT CAN BE USED AS TABLE TOP OR WALL MOUNTING DEVICE. THESE LOW COST HYGRO-METERS ARE IDEAL FOR MEASURING ROOM TEMPERATURE AND RH IN COMPUTER ROOMS, AC ROOMS, OFFICES, INSTRUMENT ROOMS AND MANY OTHER APPLICATIONS.
|
|
INFRARED THERMOMETER - MODEL TM-9 - MODEL TM-908 IS A LOW COST, MICROPROCESSOR BASED, INFRARED THERMOMETER THAT PROVIDES NON-CONTACT TEMPERATURE MEASUREMENT. IT IS IDEALLY SUITED FOR MEASURING THE TEMPERATURE IN ELECTRICAL PANELS, ROTATING DRUMS, MOVING OBJECTS, FOOD AND BEVERAGES AND OTHER APPLICATIONS. THE RANGE OF MEASUREMENT COVERED IS - 10 TO 300C. RESOLUTION IS 1C FOR - 10 TO 300C AND 0. 1C FOR - 10.0 TO 110.0C. TEMPERATURE SCALE OF C OR F CAN BE SELECTED. ACCURACY IS ±2% OF READING. EMISSIVITY CAN BE ADJUSTED BETWEEN 0.10 AND 0.95. MEMORY IS AVAILABLE IN THE INSTRUMENT TO STORE MAXIMUM, MINIMUM AND AVERAGE. THE PORTABLE INSTRUMENT IS LIGHT IN WEIGHT AND OPERATES ON 9-V DC BATTERY. THE INSTRUMENT IS SUPPLIED COMPLETE WITH IR SENSOR AND A CARRYING CASE.
|
|
AC DRIVES - MB CONROL & SYSTEMS PVT LTD PRESENTS LOW-COST, MICROPROCESSOR-BASED AC DRIVES (SERIES EI-8002), THAT INCORPORATE LATEST IGBT TECHNOLOGY. THESE DRIVES SUPPLY PWM SENSORLESS FLUX VECTOR CONTROL AND HAVE STARTING TORQUE OF 150 PER CENT OF THE RATED LOAD THE DRIVES HAVE BUILT-IN PL REGULATOR AND AUTO-TUNE FEATURE TO DETECT CONTROL PARAMETERS AND PROVIDE SMOOTH SPEED CONTROL. THE AC DRIVES ARE STORED IN PANEL MOUNTING SHEET METAL ENCLOSURE. FRONT PANEL PRGOGRAMMING MODULE CAN BE REMOVED AFTER THE DRIVES HAVE BEEN CONFIGURED. THESE DRIVES ARE ALSO AVAILABLE WITH OPTIONAL REMOTE CONTROLLERS. SPEED CONTROL SIGNAL COME FROM THE FRONT PANEL POTENTIOMETER OR REMOTE 0 TO 10 V DC OR 4 TO 20 MA SIGNALS. FORWARE-REVERSE, MULTI-SPEED INPUTS AND DC INJECTION BREAKING ARE CATERED IN THESE AC DRIVES. INVERTER FAULT OUTPUT SIGNAL AND SPEED SIGNAL OUTPUTS ARE ALSO PROVIDED. ALL THE DRIVE OPERATIONAL PARAMETERS, INCLUDING ACCELERATION AND DECELERATION TIME CAN BE PROGRAMMED AS PER APPLICAATION NEEDS THE DRIVES ALSO HAVE OPTIONAL RS-232/485 INTERFACE. THE AC MOTOR DRIVES ARE AVAILABLE IN 1 HP AND 2 HP RATINGS. INPUT VOLTAGE IS 220 V AC, 50 HZ. PERMITABLE FLUCTUATION IN INPUT VOLTAGE IS +10 PER CENT.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
