|
|
Instrumentation & Control Equipments
|
Suppliers Directory
|
MIKROTECH SALES & SERVICE
| | Address : |
98 A/17 HADAPSAR INDUSTRIAL ESTATE |
| Telephone : |
020 2670567, 2672068 / 26870567 |
| Fax : |
0212 2675383 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
ELECTRONIC DIAL CALIBRATION TESTER -
MIKROTECH PRESENTS AN ELECTRONIC DIAL CALIBRATION TESTER. IT IS ADVANTAGEOUS FOR PERIODIC CALIBRATION OF PLUNGER AND LEVER TYPE DIAL AND BORE GAUGES. THE UNIT CAN BE COMPUTER INTERFACED WITH USER FRIENDLY SOFTWARE FOR STATISTICAL ANALYSIS OF MEASURED VALUES. THE RANGE COVERED IS 0 TO 10 MM (0 TO 0.4").
|
|
ELECTRONIC DIAL GAUGE CALIBRATION TESTER -
MICROTECH PRESENTS ELECTRONIC DIAL GAUGE CALIBRATION TESTER (LC 0.0001 MM) WHICH SUITS THE ISO 9000 REQUIREMENTS FOR PERIODIC CALIBRATION OF ONE-MICRON DIAL GAUGES. THE EQUIPMENT IS OFFERED IN ASSOCIATION WITH SYLVAC SA, SWITZERLAND, AND IS USEFUL FOR PERIODIC CALIBRATION OF PLUNGER TYPE DIAL GAUGES; LEVER TYPE DIAL GAUGES AND BORE GAUGES. THE EQUIPMENT INCLUDES OF A RIGID STAND HAVING THE DIAL GAUGE FITTING ARRANGEMENT ON AN UPPER HOLDER AND A MICRO SCREW WITH PROBE IN THE HOLDER BELOW THE SAME. THE DIAL GAUGE HOLDING SYSTEM HAS A MECHANISM OF FINE ADJUSTMENT FOR SETTING THE GAUGE. THIS IS THE SPECIALITY OF ITS DESIGN. THE DIGITAL UNIT TESTIFIES MOVEMENT OF THE PROBE WHICH IS FITTED IN THE MICRO SCREW. THE DIGITAL INDICATION UNIT HAS THE REQUIRED NUMBER OF OPERATING SWITCHES FOR SETTING DIFFERENT MODES. THE EQUIPMENT WILL PARTICULARLY MEET ISO 9000 REQUIREMENT OF PERIODIC CALIBRATION OF PRECISION MEASURING INSTRUMENTS. IT CAN ALSO BE INTERFACED WITH A COMPUTER AND A CALIBRATION SOFTWARE IS OFFERED WITH THE EQUIPMENT.
|
|
GEAR ROLLING TESTER - USEFUL FOR CHECKING TOTAL COMPOSITE ERROR, TOOTH TO TOOTH ERROR, PCD AND BACKLASH IS THE MIKROTECH GEAR-ROLLING TESTER. THE EQUIPMENT CONSISTS OF A SOLID AND ROBUST BASE, WHICH HAS ONE FLOATING SLIDE WHILE THE OTHER IS FIXED. THE FLOATING SLIDE IS MOUNTED VIRTUALLY FREE WITHOUT PLAY AND FRICTION, FLOATING ON HIGH QUALITY PRECISION NEEDLE BEARINGS, AND ENSURES MAXIMUM EXACTNESS AND REPEATABILITY. THIS SLIDE IS CONNECTED TO A DIAL GAUGE, WHICH INDICATES THE VARIATION. GEAR MOUNTING ARBORS ARE AVAILABLE WITH THE EQUIPMENT, WHICH ARE FIXED ON FLOATING AND FIXED SLIDES, RESPECTIVELY. THE FLOATING TABLE PROVIDES EXTREMELY FREE AND FINE MOVEMENT AND THUS ACCURATE TEST RESULTS ARE ACCOMPLISHED. THE SUITABLE MECHANICAL ASSEMBLY IS INCORPORATED IN THE EQUIPMENT TO ENABLE USERS TO SET THE SPRING PRESSURE DEPENDING UPON THE MODULE OF THE GEAR. THE SCALE IS FIXED ON THE BASE OF THE EQUIPMENT AND A VERNIER SCALE IS ATTACHED ON THE FLOATING SLIDE. THE CENTRE DISTANCE IS SHOWN ON THE VERNIER SCALE. THE HIGH CENTRE COLUMN IS AVAILABLE FOR CHECKING SHAFT GEARS. THE SPUR GEARS RANGING FROM DIA 40 MM TO 350 MM AND 3 SHAFT GEARS UP TO 750 MM LENGTH, CAN BE CHECKED. THE BEVEL AND WORM GEAR ATTACHMENT IS AVAILABLE AS AN OPTIONAL ACCESSORY.
|
|
DOUBLE FLANK GEAR ROLLING TESTER -
OFFERED BY MIKROTECH, THE DOUBLE FLANK GEAR-ROLLING TESTER FOR CHECKING SPUR, HELICAL AND SHAFT TYPE GEARS. THE EQUIPMENT IS USEFUL FOR INSPECTING TOTAL COMPOSITE ERROR, TOOTH TO TOOTH ERROR AND BACKLASH. THE PRECISION ASSEMBLY HAS PINION AND RACK. THE EQUIPMENT IS STRAPPING AND CONSISTS OF CI BASE, VERTICAL COLUMN FOR ASCENDING SHAFT GEARS OF 750-MM LENGTH AND SLIDING TABLE. THE SLIDING TABLE FLOATS ON LEAF SPRINGS AND THE SAME IS ATTACHED TO A DIAL GAUGE. WITH THE COUNTER WEIGHT THE VERTICAL COLUMN HAS BELT ARRANGEMENT. THE FLOATING SLIDE IS FITTED ON A RECIPROCAL BAR HAVING RECISION MECHANISM TO ENABLE THE USER TO INCREASE GRADUALLY THE HEIGHT OF SLIDING TABLE THEREBY INCREASE THE HEIGHT OF MASTER GEAR AND EXAMINE THE COMPONENTS AT DIFFERENT HEIGHTS. THE VERNIER SCALE IS FITTED ON THE BASE OF THE EQUIPMENT FOR SETTING THE CENTER DISTANCE. THE GEAR TRAIN MECHANISM IS AVAILABLE FOR ROTATING THE COMPONENT GEAR AND HENCE THE GEAR UNDER TEST ELIMINATES MANUAL ERROR. WHILE CONDUCTING THE TEST, THE MASTER GEAR IS MOUNTED ON FLOATING SLIDE, WHICH CARRIES THE ARBOR FOR MOUNTING THE MASTER GEAR. ON THE OTHER SIDE OF THE ARBOR THE COMPONENT GEAR IS MOUNTED. THE MASTER GEAR AND COMPONENT GEAR ARE MESHED WITH REFERENCE TO CENTRE DISTANCE AND THEN ROLLED BY A HAND WHEEL. WITH HIGH QUALITY MOTORISED UNIT WITH THE SPEED RANGE OF 3-15 RPM AS AN OPTION THE EQUIPMENT IS ALSO AVAILABLE
|
|
STATIC TORQUE METER - MIKROTECH'S STATIC TORQUE METER IS AIMED TO SET AND CALIBRATE ALL TYPES OF TORQUE WRENCHES. IT IS FIXED WITH A CLEAR, EASY TO READ DIAL WITH SCALES IN METRIC, IMPERIAL, AND S1 UNITS. THIS INSTRUMENT IS OBTAINABLE IN DIFFERENT MODELS OF VARYING RANGES FROM 0.25 TO 400 KGF-M.
|
|
PISTON DIAMETER TESTER - AVAILABLE IN THREE MODELS MIKROTECH OFFERS PISTON DIAMETER TESTER. TO TEST THE PISTON DIA OF 40-70 MM, 70-100 MM, 70-100 MM, AND 100-150 MM, AND PISTON HEIGHTS TO 160 MM. IT IS USED FOR CHECKING THE PISTON DIAL BY COMPARISON METHOD.
|
|
CHECK MASTER - MIKROTECH CHECK MASTER IS A VERSATILE, HIGHLY SENSITIVE, BI-DIRECTIONAL PRECISION MEASURING INSTRUMENT, SUITABLE FOR BOTH LOW AND HIGH VOLUME PRODUCTION GAUGING. THE EQUIPMENT IS DESIGNED TO CHECK BOTH INTERNAL AND EXTERNAL PARAMETERS, BY COMPARISON METHOD. THE VERSATILITY OF THE MEASURING FEATURES OFFERED BY THIS INSTRUMENT MAKES IT MOST VALUABLE WHEN THERE IS A NEED FOR READILY AVAILABLE GAUGING SETUP UNDER DIFFERENT PRODUCTION SETUPS. THE USE OF MULTI-DIMENSIONAL SETUPS ON THIS INSTRUMENT PROVIDES FAST MEASUREMENT OF MORE THAN ONE DIMENSION AND HENCE CUTS DOWN INSPECTION TIME. THE CHECK MASTER CONSISTS OF A GROUND AND HARDENED CAST IRON BASE AND A FLOATING TABLE WHICH FLOATS ON A PAIR OF LEAF SPRINGS. THE DISPLACEMENT OF THE FLOATING TABLE IS INDICATED ON THE DIAL INDICATOR CONNECTED TO THE FLOATING TABLE. THE INSTRUMENT CAN BE SET TO CHECK EITHER INTERNAL DIMENSION OR EXTERNAL DIMENSION WITH THE HELP OF AN ACTUATING LEVER. THE QUICK RELEASE KNOB FACILITATES FAST LOADING AND UNLOADING OF COMPONENTS ON THE ANVILS. THE EQUIPMENT CAN BE USED FOR CHECKING GEAR COMPOSITE ERROR, BUSH CONCENTRICITY, OUTSIDE AND INSIDE DIAMETERS.
|
|
SQUARE MASTER -
SQUARE MASTER FROM MIKROTECH IS USEFUL FOR CHECKING SQUARENESS, STRAIGHTNESS AND PARALLELISM. THREE MODELS OF THE SAME ARE AVAILABLE). TO COVER THE TEST RANGES (0-250 MM, 0-350 MM, 0-550 MM), SLIDER STROKES (150 MM, 250 MM, 450 MM), AND SQUARENESS (0.003 MM, 0.006 MM, 0.01 MM).
|
|
TORQUE WRENCH TESTER - TWT-1 -
FOR PERIODIC CALIBRATION OF TORQUE WRENCHES IN THREE UNITS, VIZ, KGF-M, NM AND IBF INCH. TWO MODELS OF MIKROTECH’S TORQUE WRENCH TASTER ARE AVAILABLE: TWT-1 (RANGE: 0-55 KGF-M), AND TWT-2 ( RANGE: 0-200 KGF-M)
|
|
ELECTRONIC DIAL GAUGE CALIBRATION TESTER -
OFFERED BY MICROTECH, THE ELECTRONIC DIAL GAUGE CALIBRATION TESTER MEETS THE ISO 9000 REQUIREMENTS FOR PERIODIC CALIBRATION OF ONE-MICRON DIAL GAUGES. IN ASSOCIATION WITH SYLVAC SA, SWITZERLAND IS THE EQUIPMENT OFFERED AND IS USEFUL FOR PERIODIC CALIBRATION OF PLUNGER TYPE DIAL GAUGES, LEVER TYPE DIAL GAUGES AND BORE GAUGES. THE EQUIPMENT INCLUDES OF A RIGID STAND HAVING THE DIAL GAUGE FITTING ARRANGEMENT ON AN UPPER HOLDER AND A MICRO SCREW WITH PROBE IN THE HOLDER BELOW. THE DIAL GAUGE HOLDING SYSTEM HAS A MECHANISM OF FINE ADJUSTMENT FOR SETTING THE GAUGE. THE SPECIALITY OF ITS DESIGN IS THAT. THE DIGITAL UNIT INDICATES MOVEMENT OF THE PROBE, WHICH IS FITTED IN THE MICRO SCREW. THE DIGITAL INDICATION UNIT HAS THE WANTED NUMBER OF OPERATING SWITCHES FOR SETTING DIFFERENT MODES. THE EQUIPMENT WILL SPECIALLY MEET ISO 9000 REQUIREMENT OF PERIODIC CALIBRATION OF PRECISION MEASURING INSTRUMENTS. IT CAN ALSO BE INTERTWINED WITH A COMPUTER AND A CALIBRATION SOFTWARE IS OFFERED WITH THE EQUIPMENT.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
