|
|
Instrumentation & Control Equipments
|
Suppliers Directory
|
PUNE POLYTRONICS PVT LTD
| | Address : |
297 A SHANIWAR PETH |
| Telephone : |
24458914 |
| Fax : |
91 20 24454122 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
INDICATING TOTALIZER - SERIES IT-4 - PUNE POLYTRONICS INTRODUCES A RANGE OF ELECTRONIC PROCESS CONTROL INSTRUMENTS AND SYSTEMS. INDICATING TOTALIZER SERIES IT-400 IS DESIGNED FOR TOTALISING APPLICATIONS. THE TOTALIZER ACCEPTS LINEAR/NON-LINEAR INPUT FROM A WIDE RANGE OF FLOW TRANSMITTERS/TRANSDUCERS. IT CONVERTS THEM INTO PULSES WHICH ARE TOTALISED ON A BUILT-IN 8-DIGIT ELECTROMECHANICAL OR LCD COUNTER. AT THE SAME TIME INSTANTANEOUS FLOW RATE IS DISPLAYED ON A 3½ DIGIT DISPLAY.
|
|
INSTRUMENTS, UNIVERSAL TYPE - SERIES UI-10 - PUNE POLYTRONICS PRESENTS A RANGE OF ELECTRONIC PROCESS CONTROL INSTRUMENTS AND SYSTEMS. SERIES UI-1000 PROVIDES A RANGE OF PRODUCTS WHICH ARE UNIVERSAL IN ALL RESPECTS, IE, INPUT SIGNAL/SENSOR, RANGE OF MEASUREMENT AND OUTPUT MODE/DEVICE. A SINGLE INSTRUMENT COVERS THE WHOLE RANGE OF RESPECTIVE SERIES. BASICALLY THESE INSTRUMENTS ARE MICROPROCESSOR-BASED HAVING HIGH FLEXIBILITY FOR SITE PROGRAMMMG.
|
|
VALVE TEST RIG CONTROLLER - POLYTRONICS VALVE TEST RIG CONTROLLER IS SPECIALLY DESIGNED FOR AUTOMATIC LIFE CYCLE OR LEAKAGE TESTING OF DIFFERENT TYPES OF CONTROL VALVES. IT IS USEFUL FOR INDUSTRIAL VALVE MANUFACTURERS. THE CONTROLLER CONTROLS A HIGH PRESSURE PUMP UNIT AND PNEUMATIC OR ELECTRIC ACTUATOR WHICH CAN OPEN AND CLOSE THE VALVE UNDER TEST AS PER THE REQUIREMENT. THE LEAKAGE IN THE VALVE CAN BE EASILY DETECTED BY JUST CHECKING THE PRESSURE AROUND THE VALVE AFTER HOLD TIME. IN NORMAL TEST CONDITIONS SET PRESSURE AND PRESSURE HOLD TIME ARE FIXED VALUES OR ALTERNATIVELY PROGRAMMABLE TIME SETTING CAN BE SUPPLIED. DURING AUTOMATIC TESTING AN ELECTROMECHANICAL/ELECTRONIC COUNTER COUNTS THE NUMBER OF OPEN AND CLOSE CYCLES. DIFFERENT SIZES OF VALVES CAN BE TESTED BY HOLDING THE VALVES IN DIFFERENT PRESSURE RANGES BY SELECTING THE PUMP CAPACITY. RELIABLE ELECTRONIC PRESSURE TRANSMISSION/INDICATION SYSTEM IS INCORPORATED. AN ARRANGEMENT IS MADE TO BYPASS EXCESS GENERATED PRESSURE TO ASSURE SAFE OPERATION. WITH THE USE OF DEDICATED LOGIC CONTROLLER, REQUIRED LOGIC AND SAFETY OPERATION CAN BE PROVIDED AS PER CUSTOMER'S REQUIREMENT.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
