|
|
Instrumentation & Control Equipments
|
Suppliers Directory
|
RADIO EQUIPMENT CO
| | Address : |
3/C,MADAN STREET, ESPLANADE, |
| Telephone : |
2371787 / 98 |
| Fax : |
2216926 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
AUTO LUMINAIRE TESTER - AL/055/R - RADIO EQUIPMENT CO OFFERS AUTO LUMINAIRE TESTER, MODEL AL/055/REC. THE UNIT CAN CARRY OUT THE TESTS WHICH ARE RELEVANT TO THE CLAUSES IS 10322 (PART 1-5) 1987. THE BASIC TESTS WHICH CAN BE CARRIED OUT IN THE UNIT ARE AS FOLLOWS: EARTHING TEST, HIGH VOLTAGE TEST, WIRING TEST AND NOMINAL CURRENT TEST. THIS MICRO-CONTROLLER BASED UNIT CARRIES OUT ALL THE TESTS AUTOMATICALLY. IF ANY OF THE LUMINAIRES FAILS AT ANY POINT DURING THE TEST THE TESTING WILL STOP AT THAT POINT WITH AN AUDIO-VISUAL ALARM. THE UNIT COMES IN A 19"RACK ALONG WITH THE HV TEST PROBE. THE INPUT VOLTAGE IS 230 V AC. THE USER CAN ALSO CONNECT THE UNIT TO HIS PC FOR ON-LINE DATA ACQUISITION OF THE TEST.
|
|
DIGITAL PRESET COUNTER & CONTROLLERS - REC/DC/ - RADIO EQUIPMENT COMPANY INTRODUCES DIGITAL COUNTERS, MODEL REC/DC/01, FOR PRODUCT COUNTING COVERING A RANGE BETWEEN 3, 4 AND 6 DIGITS. IT OPERATES FROM OPTICAL SENSORS, LIMIT SWITCHES, PROXIMITY SWITCHES AND POTENTIAL FREE CONTACT. IT IS ALSO AVAILABLE IN PRESETTABLE MODELS. THE SET POINT IS ADJUSTABLE WITH THE HELP OF THUMB WHEEL SWITCH. THE RESOLUTION OF THE UNIT IS ±1 DIGIT. THE TOTAL COUNT CAN BE VIEWED WITH THE HELP OF FND EITHER RED OR GREEN. IT IS AVAILABLE IN DIFFERENT DISPLAY SIZES FROM .5 INCH TO 4 INCH. IT IS ALSO AVAILABLE IN 24 V/110 V OR 240 V MODEL. THE RELAY OUTPUT IS 1 NO AND 1 NC 5 A. IT IS AVAILABLE IN DIFFERENT METAL BOXES AS PER REQUIREMENTS AND DEPENDING ON THE DISPLAY SIZE. ALL UNITS ARE COVERED BY 12 MONTHS WARRANTY.
|
|
TEMPERATURE CONTROLLERS, DIGITAL TYPE - REC/DT/ - RADIO EQUIPMENT COMPANY PRESENTS A MULTITUDE OF DIGITAL TEMPERATURE CONTROLLERS, MODEL REC/DT/01 FOR RTD (PT-100) AND J/K COVERING A TEMPERATURE RANGE OF 0-300/0-400/0-600/0-1200°C. THE RESOLUTION FOR 0-300°C IS 0.1°C, AND 1°C FOR HIGHER RANGES. THE DESIRED TEMPERATURE CAN BE SET FROM THE POTENTIOMETERS LOCATED ON THE FRONT PANEL. 0.5"FND DISPLAY LOCATED ON THE FRONT PANEL DISPLAYS THE ACTUAL TEMPERATURE AND THE SET TEMPERATURE CAN BE SEEN BY PRESSING THE MICROSWITCH LOCATED ON THE FRONT PANEL. THE CONTROLLER IS HAVING THE AUTOMATIC COLD JUNCTION COMPENSATION FOR THERMOCOUPLES AND WIRE LENGTH COMPENSATION FOR THE PT-200 SENSORS. CONTROL ACCURACY IS 0.1°C FOR LOWER RANGES AND 1° FOR THE HIGHER RANGES. THE STANDARD CUT-OUT FOR THESE CONTROLLERS ARE 96 (H) X 96 (W) X 150 (D) MM. THE ABOVE ITEM IS ALSO AVAILABLE IN 96 (H) X 48 (W) X 150 MM AND 72 (H) X 72 (W) X 110 (D) MM SIZES. THESE CONTROLLERS ARE ALSO AVAILABLE IN TIME BASED PROPORTIONATE TYPE AND ALSO IN DOUBLE SET POINT TYPES. THEY COME WITH ONE-YEAR WARRANTY. SPECIAL FEATURES CAN ALSO BE INCORPORATED AGAINST BULK ORDERS.
|
|
MEASUREMENT SYSTEM (COMPUTERISED) FOR SQ - RADIO EQUIPMENT COMPANY INTRODUCES A COMPUTERISED MEASUREMENT SYSTEM. IT IS A COMPUTERISED DATA ACQUISITION SYSTEM FOR SQC NEED. IN THIS SYSTEM, A SPECIALLY DESIGNED MULTIPLEXER CARD IS CONNECTED TO THE SERIAL PORT OF A PC. VARIOUS TYPES OF HIGH PRECISION GAUGES LIKE DIAL GAUGE, TEMPERATURE CONTROLLERS, WEIGHING BALANCES AND MULTIMETERS, ARE PREFERABLY TO BE CONNECTED TO THE PC THROUGH THE MULTIPLEXER CARD. DATA ACQUISITION THROUGH THESE INSTRUMENTS CAN BE PROGRAMMABLE OR USER INITIATED. THE SOFTWARE CREATES TABULATED REPORTS AND GRAPHS, WHICH INCLUDES RUN CHART, CONTROL CHART, HISTOGRAM, AND VALUE OF CP, CPC AND SIGMA. THE ANALYSIS CAN BE DONE SHIFT-WISE, DAY-WISE, MONTHLY, OR YEARLY. THE SYSTEM CAN BE HOOKED UP IN THE LAN SO THAT ALL THE INFORMATION IS AVAILABLE AT ANY NODE IN A FACTORY. THIS SYSTEM IS MAINLY USED BY BATTERY MANUFACTURERS, SOAPS AND CHEMICALS, ENGINEERING INDUSTRIES, FOOD PRODUCTS AND PACKAGING INDUSTRIES.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
