|
|
Instrumentation & Control Equipments
|
Suppliers Directory
|
THE ERASER COMPANY INC
| | Address : |
PO BOX 4961 OLIVA DRIVE SYRACUSE, |
| Telephone : |
315 454-3237 |
| Fax : |
315 454-3090 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
WIRE & CABLE MEASURING METERS - WM SERIES - THE ERASER COMPANY INC PRESENTS THEIR LATEST PRODUCT, THE WM SERIES OF WIRE AND CABLE MEASURING METERS.THE WM UNITS WILL CORRECTLY MEASURE TO LENGTH VARIOUS TYPES OF WIRES, TUBING,CABLES, FLAT MATERIALS, CORD ETC, USED IN THE ELECTRICAL ASSEMBLY INDUSTRY. IT IS AVAILABLE IN BOTH INCHES AND METRIC VERSIONS, WITH DIFFERENT TYPES OF MEASURING ROLLERS FOR DIFFERENT APPLICATIONS. THE WMI MEASURES IT, FEET AND INCHES TO 9,999"11", AND IS ACCESABLE WITH STANDARD KNURLED ROLLERS, URETHANE ROLLERS TO DECREASE MARKING OF THE MATERIAL JACKET, OR GRIT ROLLERS TO SUBDUE SLIPPAGE AND INCREASE ACCURACY. ALL WM METERS HAVE A DIGITAL COUNTER TO RECORD THE AMOUNT OF MATERIAL MEASURED, WHICH IS EASILY RESETTABLE WITH A ONE-TOUCH LEVER. ALL METERS WILL MEASURE ROUND MATERIAL UP TO 2" (50.8 MM) IN DIAMETER OR FLAT MATERIAL UP TO 2" (50.8 MM) WIDE WITH AN ACCURACY OF ±0.5% DEPENDENT ON MATERIAL AND FEED. TO MEASURE MATERIAL, ADJUST THE MATERIAL INPUT GUIDES FOR THE MATERIAL SIZE, DEPRESS THE MATERIAL RELEASE LEVER, AND FEED THE MATERIAL BETWEEN THE SPRING LOADED MEASURING WHEELS. PULL THE MATERIAL THROUGH UNTIL THE WANTED AMOUNT HAS BEEN MEASURED, THEN CUT. THE WM METERS MAY BE MOUNTED ON OPTIONAL BENCH OR FLOOR STANDS, AND MAY BE USED IN CONJUNCTION WITH ERASER BENCH DEREELERS AND COILERS TO FORM A COMPLETE CUTTING, MEASURING AND REELING COMBINATION.
|
|
WIRE TWISTER - THE ERASER COMPANY PRESENTS WT SERIES OF AUTOMATIC WIRE TWISTERS USED TO MAKE TWISTED PAIRS FROM WIRES THAT ARE PRE CUT; CUT AND STRIPPED; OR CUT, STRIPPED AND TERMINATED. THERE ARE THREE MODELS IN THE WT SERIES THAT CAN GIVE TWIST LENGTHS UP TO 20’ (6.1M), TWIST QUANTITIES UP TO 9,999 TWISTS PER CYCLE AND TWISTS SPEEDS CHANGEABLE FROM 0 TO 26 TURNS PER SECOND. THE UNITS ARE ELECTRIC FOOT-PEDAL OPERATED AND INCORPORATE A VARIABLE SPEED CONTROL AND TURN COUNTER FOR CONSISTENT, ERROR-PROOF TWISTED PAIRS. THE TWISTERS CAN TWIST MULTIPLE WIRES NOT TO EXCEED ¼" OD (6.35 MM() BUNDLE OR TWO 16 AWG (1.30 MM() STRANDED WIRES. USING LATEX GRIP TUBES THAT HOLD THE WIRE ENDS, THE BUNDLES CAN BE TWISTED WITH NO DAMAGE TO THE WIRE OR STRIPPED CONDUCTORS. THE WT40 IS DESIGNED TO MAKE TWISTED PAIRS OR TWIST TOGETHER SEVERAL LARGE WIRES OR PRE-CONNECTED WIRES. THIS UNIT UTILISES A CUSTOM-BUILT HOLDER MADE TO SPECIFICATION FOR EACH INDIVIDUAL APPLICATION. ALSO OFFERED FROM THE COMPANY IS A WIDE RANGE OF STRIPPERS AND CABLE CUTTERS, FYBRGLASS AND WIRE BRUSH WHEELS, MEASURING TOOLS, STRIPPING WHEELS DEREELERS, INFRARED HEATING EQUIPMENT, AND FYBRGLASS AND NYLON ERASERS.
|
|
FINE WIRE STRIPPER - THE ERASER COMPANY COMES THORUGH WITH THEIR LATEST PRODUCT FINE WIRE STRIPPER.THIS NEW RT2S REMOVES FILM-TYPE INSULATION FROM WIRES 28 TO 45 AWG (0.33 - 0.046 MM Ø). THE RT2S STRIPS A WIDE RANGE OF MATERIAL, INCLUDING FORMVAR, ML, VARNISH, ENAMEL AND ISONEL. THE RT2S STRIPS USING ROTATING CONICAL SHAPED FIBREGLASS WHEELS THAT GENERATE FRICTION TO QUICKLY REMOVE INSULATION WITHOUT CONTAMINATING OR FLATTENING WIRE CONDUCTORS. THE WHEEL DESIGN PERMITS CLOSE-TO-COIL BODY STRIPPING, WITH INSULATION AND OXIDATION EASILY REMOVED VIA A DUST TAKE-OFF PORT TO LEAVE A CLEAN, POLISHED CONDUCTOR. MULTIPLE WIRES MAY BE PROCESSED AT ONE TIME. UTILIZING A STRIP LENGTH STOP TO PRODUCE CONSISTENT STRIP LENGTHS AND AN ENCLOSED STRIPPING HEAD FOR OPERATOR SAFETY, THE RT2S IS COMPACT, EASY-TO-USE, AND RUGGEDLY BUILT FOR PRODUCTION USE. IT WEIGHS ONLY 10 LBS AND OPERATES USING A 115 V, 60 HZ OR 220/240V, 50 HZ ELECTRICAL SUPPLY.
|
|
BLADE WIRE STRIPPERS & TWISTERS - THE ERASER CO, INC PRESENTS C200 ROTARY BLADE WIRE STRIPPERS AND TWISTERS STRIPS COAXIAL CABLES, STANDED AND SOLID WIRES BETWEEN 0.028" AND 0.265". THE ADJUSTABLE LENGTH STOP CAN BE SET FOR STRIP LENGTHS FROM 1/32" TO 2-1/2". THE C200 STRIPPING HEAD CUTS THROUGH THE INSULATION ON THE WIRE LEAVING INNER CONDUCTORS UNDAMAGED. WHEN THE SLUG IS TAKER AWAY THE STRANDS OF THE WIRE ARE TWISTED AND READY FOR TERMINATING. IF NEEDED THE SLUG MAY REMAIN ON THE WIRE FOR REMOVAL AT TERMINATION, LATER ALSO AVAILABLE ARE WIRE AND CABLE CUTTERS, WIRE, TWISTERS, WIRE BRUSH WHEELS, FIBER OPTIC TOOLS, DEREELERS, INFRARED HEATING EQUIPMENT AND, MEASURING TOOLS.
|
|
CIRCUIT BOARD HOLDERS - MODELS WY10, WY20, WY30 AND WY40 ARE FREESTANDING UNITS DEVELOPED TO REDUCE ASSEMBLY TIMES IN THE MANUFACTURE OF PRINTED CIRCUIT BOARDS IN THE ELECTRICAL AND ELECTRONIC INDUSTRIES THESE INCORPORATE SPRING-LOADED, GROOVED GUIDE RAILS TO ACCOMMODATE CIRCUIT BOARDS OF DIFFERENT SIZES AND THICKNESSES. SET-UP FOR A SPECIFIC BOARD SIZE IS A SIMPLE KNOB ADJUSTMENT WITH NO TOOLING REQUIRED A HINGED, FOAM-LINED LID IN EACH MODEL IS ADJUSTABLE FOR VARIOUS CIRCUIT BOARD CONFIGURATIONS AND EFFECTIVELY HOLDS COMPONENTS IN PLACE SECURELY FOR CUTTING AND SOLDERING OPERATIONS. THE CONDUCTIVE FOAM AVAILABLE ON THE UNITS ALLOWS STATIC-SENSITIVE COMPONENTS TO BE INSERTED INTO PCBS WITHOUT RISK OF DAMAGE. THE CONDUCTIVITY OF THIS FOAM WILL NOT WEAR OFF,AS WILL CHEMICALLY TREATED ANTISTATIC FOAMS AND WY SERIES PRINTED CIRCUIT BOARD ASSEMBLY HOLDERS ARE PROVIDED IN FOUR DIFFERENT SIZES TO ACCOMMODATE THE SMALLEST BOARDS UP TO BOARDS THAT MEASURE 19-3/4" X 13 7/8" (502 X 352 MM).
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
