|
|
Instrumentation & Control Equipments
|
Suppliers Directory
|
TMC MEASURING INSTRUMENTS PVT. LTD.
| | Address : |
266 DR. ANNIE BESANT ROAD, WORLI, |
| Telephone : |
24226394 |
| Fax : |
022 24309876 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
PROFILE PROJECTOR - TMC MEASURING INSTRUMENTS PVT LTD PRESENTS THEIR LATEST ATTRACTION, PROFILE PROJECTORS. THIS IS MANUFACTURED BY DORSEY USA-MAKE OPTICAL COMPARATORS, WELL KNOWN WORLDWIDE FOR HIGH PRECISION MACHINES WITH ACCURATE OPTICS AND A PRECISION ENGINEERED WORK STAGE. DORSEY PROFILE PROJECTORS ARE AVAILABLE IN THE RANGE OF 350 MM TO 1,500 MM WITH VERTICAL OR HORIZONTAL BEAM. THEY CAN ALSO HOUSE A WIDE VARIETY OF READ-OUT AND TOOLING OPTIONS THAT CAN BE PURCHASED WITH THE MACHINE OR RETROFITTED AT A LATER DATE. THEY ARE OFFERED FROM SIMPLE READ-OUT SYSTEMS TO MICROPROCESSOR DISPLAYS WITH GEOMETRIC FUNCTIONS AND AUTOMATIC EDGE SENSING. THEY ALSO HAVE AN ADVANCED FIBRE-OPTIC PROFILE ILLUMINATION SYSTEM WHICH GETS RID OF HEAT DISTORTION AND ERROR SO MUTUAL ON OTHER COMPARATORS. DORSEY 20"ANGLE SCREEN PROJECTOR IS PERFECT FOR TRACING MAGNIFIED DRAWINGS ON THE SCREEN AND REVERSE ENGINEERING PROJECTS. FROM AUTOMOTIVE CRANKSHAFTS TO AIRCRAFT ENGINE TURBINE BLADES, DORSEY HAS THE EXPERIENCE AND FACILITIES TO DESIGN AND BUILD ANY SPECIAL COMPARATOR. DORSEY MANUFACTURES ALSO SNAP GAUGES FOR BALL MEASUREMENTS, PITCH DIAMETER, MULTIPLE APPLICATIONS, LONG TRAVEL, ETC.
|
|
SPECIAL PURPOSE GAUGING MACHINES - LOCATED IN MUMBAI TMC MEASURING INSTRUMENTS PRESENTS THEIR LATEST ATTRACTION SPECIAL PURPOSE GAUGING MACHINES.THIS DEVICE, (CFM 3010/3020) CAN BE USED FOR SINGLE, MASS-PRODUCTION GAUGING AND FOR SPECIAL MEASUREMENTS.IT IS AVAILABLE IN SINGLE HEADED AND DOUBLE-HEADED VERSIONS, WHICH REDUCE THE INSPECTION TIME NOTABLY. CFM3010/3020 CAN MEASURE ALMOST ALL THE RADIAL PARAMETERS SUCH AS DIAMETER CYLINDRICITY, LINEAR PROFILE, ROUNDNESS, ANGULAR POSITIONS AT CRANKS/CAMS AND MANY MORE. MACHINES FOR SPECIAL MEASUREMENTS SUCH AS WEAR EVALUATIONS, CHATTERMARK EVALUATIONS, AND CAM PROFILE ARE ALSO AVAILABLE. THE STURDY MECHANICS INCLUDES HIGHLY WEAR RESISTANT CARBIDE FOLLOWERS. ALL THESE ARE SUPPORTED BY SOFTWARE, WHICH ALLOWS QUICK DISPLAY OF RESULTS, ON LINE DISPLAY OF MACHINE STATUS AND INTERACTIVE MENU GUIDED OPERATION. DEPENDING ON THE GAUGING REQUIREMENTS ABOUT 6 TO 20 COMPONENTS CAN BE MEASURED IN AN HOUR. VARIOUS OTHER TYPES OF GAUGING MACHINES THAT ARE AVAILABLE ARE CRANKSHAFT MULTI-GAUGING MACHINE, SEMI-AUTOMATIC VALVE GAUGING MACHINE, AND MEASURING AND SORTING MACHINES FOR SMALL SHAFTS, VALVE SEAT RINGS, CONNECTING RODS, AND BEARING SHELLS. ALSO MEASURING MACHINES FOR WHEEL RIMS/PISTONS ARE OFFERED.
|
|
THICKNESS GAUGE FOR MULTI LAYERS - POSITECTOR 1 - TMC MEASURING INSTRUMENTS PRESENTS THICKNESS GAUGE FOR MULTI LAYERS -POSI TECOR 1.THEY ARE SUITABLE FOR MEASURING COATING THICKNESS ON DIFFERENT SUBSTRATES SUCH AS WOOD, CONCRETE, PLASTIC, GLASS, CERAMIC, FIBREGLASS, AND MORE.THIS MODIFIED VERSION OF THE POPULAR POSITECTOR 100 SERIES COATING THICKNESS GAUGE NOW MEASURES MULTIPLE AND SINGLE LAYER COATING THICKNESS, HAS A LARGE GRAPHIC DISPLAY, AND PROVIDES CLEAR, REPEATABLE MEASUREMENTS FOR A WIDER RANGE OF APPLICATIONS. IT HAS BEEN REDESIGNED TO MAKE POSSIBLE INSPECTORS AND QUALITY MANAGERS IN MANY INDUSTRIES TO DECIDE THE THICKNESS OF INDIVIDUAL LAYERS IN A MULTIPLE LAYER COATING SYSTEM WITH JUST ONE MEASUREMENT. READINGS FOR UP TO FIVE LAYERS ARE HINTED AT SIMULTANEOUSLY IN NUMERIC AND GRAPHIC FORMAT ON THE LARGE, BUILT-IN DISPLAY. THIS CLEAR, DISTINCT PRESENTATION OF THE READINGS MAKES THE GAUGE SETUP QUICKER AND SIMPLER THAN EVER BEFORE. USERS CAN NAVIGATE THROUGH GAUGE OPERATIONS BY MEANS OF A SIMPLE POP-UP MENU SYSTEM. JOBS CAN BE ANNOTATED AND DOCUMENTED ON BOARD OR WITH A PC AND POSISOFT ANALYSIS SOFTWARE FOR WINDOWS WHICH IS SUPPLIED WHEN THE MEMORY ALTERNATIVE IS SELECTED. ADDITIONALLY, IT HAS A RS-232 PORT FOR PRINTING TO SERIAL PRINTERS, AND A BUILT-IN INFRA-RED PORT FOR USE WITH A WIRELESS IR PRINTER. OTHER FEATURES CONTAINS ABILITY TO ACCEPT THREE FULLY INTERCHANGEABLE PROBES FOR MEASURING A VARIETY OF APPLICATIONS, A SELF-LEVELLING CONSTANT PRESSURE PROBE FOR ADDITIONAL STABILITY WHEN MEASURING, A CONTOURED HOUSING DESIGN FOR A STURDIER, MORE COMFORTABLE GRIP, AUTOMATIC OR USER-CONFIGURED SETUP, AND MILS/MICRONS SWITCHABILITY. THE GAUGE ALSO COMPLIES WITH ASTM STANDARD TEST METHOD D 6132, STANDARD TEST METHOD FOR NON-DESTRUCTIVE MEASUREMENT OF DRY FILM THICKNESS OF APPLIED ORGANIC COATINGS OVER CONCRETE USING AN ULTRASONIC GAUGE. IT HAS BEEN FOUND SUITABLE FOR MEASURING COATING THICKNESS ON CONCRETE AND OTHER NON-METALS IN ASTM ROUND-ROBIN STUDIES. THE GAUGE COMES THROUGH WITH A DURABLE CARRYING CASE, PRECISION PLASTIC SHIMS ULTRASONIC GEL, TWO `C' BATTERIES, INSTRUCTION, CERTIFICATE OF ACCURACY, AND A ONE-YEAR WARRANTY TRACEABLE, PRIMARY CALIBRATION STANDARDS AND PROCEDURES ARE ALSO ACCESIBLE FOR USE WITH THE NEW GAUGE.
|
|
UNIVERSAL CONCENTRICITY GAUGE - TMC-CON-1, 2, AND - TMC MEASURING INSTRUMENTS PRESENTS A UNIVERSAL CONCENTRICITY GAUGE IN VARIOUS MODELS.
IT HAS SOME SPECIAL FEATURES LIKE THE SIMPLEST MANNER TO CHECK CONCENTRICITY OF BORES, DIAMETERS AND STEP DIAMETERS, FACE RUNOUT AND PERPENDICULARITY; CAN BE BEST TO CHECK LENGTH IN MASS PRODUCT; SMOOTH MOTION BY FINE ADJUSTMENT SCREWS FOR INDICATOR CARRIER; TILTS 90° TO FACILITATE LOADING AND UNLOADING OF JOBS; MAGNETIC LOCKING FOR INDICATOR CARRIER STANDS; MULTIPOSITION YOKE CLAMP PROVIDED TO ACCOMMODATE LARGE RANGE OF SIZES AND TO VARY PRESSURE; GAUGE INCLUDES STANDARD CARRIER, MANUAL DRIVE/MOTORIZED DRIVE (OPTIONAL), TOP ROLLERS, END SUPPORTS; ALL GAUGES COME BEST WITH TIMING BELTS FOR SMOOTH POSITIVE DRIVE; FINE ADJUSTMENT SCREWS ON ALL DIAL INDICATORS PROVIDED; OPTIONAL - HOLDER FOR LVDT PROBES; OUTSIDE DIAMETER CAN BE CHECKED BY FLOATING DIAMETER HOLDER. THERE ARE THREE MODELS: TMC-CON-1, 2, AND 3. SPECIFICATIONS FOR MODEL TMC-CON-1 (FIGURES IN BRACKET FOR THE OTHER TWO MODELS RESPECTIVELY): MIN DIA - 1 MM (3 AND 6 MM); MAX DIA 3 MM (6 AND 25 MM); LENGTH - 50 MM (100 AND 150 MM); AND WEIGHT - 22 KG (25 AND 30 KG). THE RESOLUTION: 1 (M OR 0.1 (M WITH LVDT PROBE, AND REPEATABILITY: 1(M.
|
|
LENGTH MEASURING SYSTEM - TMC MEASURING INSTRUMENTS PRESENTS A UNIVERSAL LENGTH MEASURING SYSTEM, MODEL DMS 680 FROM JOINT INSTRUMENTS, ITALY.THIS IS A HIGH PRECISION, PC BASED MACHINE FOR CALIBRATION OF PLUG AND RING GAUGES, PLAIN AND TAPER THREAD PLUG AND, SNAP GAUGES, GAUGE BLOCKS, RING GAUGES DIAL INDICATORS, ELECTRONIC PROBESEXTERNAL AND INTERNAL MICROMETERS, AND INVOLUTE PROFILE SPLINE GAUGES. DMS 680 FULLY COMPLIES WITH ABBE'S COMPARATOR PRINCIPLE AND IT EQUIPPED WITH HIGH ACCURACY HEIDENHAIN GLASS SCALE, ADJUSTABLE WORK TABLE FOR EASY LOCATION OF INVERSION POINT, ETC. THE MEASURING RANGE FOR EXTERNAL IS 680 MM AND FOR INTERNAL 1-480 MM WITH A RESOLUTION OF 0.1 MM (0.01 MM OPTIONAL). "MICRONET" GAUGE MANAGEMENT AND MEASUREMENT SOFTWARE COMES AS STANDARD WITH THE MACHINE. THE SOFTWARE FULFILS ISO 9000 NEED.IT FULLY GUIDES THE OPERATOR THROUGH ALL CALIBRATION PROCEDURES, DOES AUTOMATIC TOLERANCES CALCULATION FOR PLAIN, THREAD AND THREAD PIPE (TAPER) GAUGE, BOTH EXTERNAL AND INTERNAL AS PER ANSI/ASME STANDARDS. COMPLETE GAUGE RECORDS ARE PROTRACTED INCLUDING CALIBRATION DATE, COST CENTRE, LOCATION, WITH SORTING BY ABOVE CRITERIA OR BY CODE. AT THE END OF ANY MEASUREMENT PROCEDURE, THE SOFTWARE PERMITS AUTOMATICALLY TO PRINT AN INSPECTION REPORT CONTAINING GAUGE DATA, ACTUAL MEASUREMENT AND THEORETICAL VALUES.
|
|
UNIVERSAL LENGTH MEASURING SYSTEM - DMS 6 - IN ASSOCIATION WITH JOINT INSTRUMENTS ITALY TMC MEASURING INSTRUMENTS PVT LTD. PRESENTS
THE DMS 680 UNIVERSAL LENGTH MEASURING SYSTEM. IT IS A HIGH PRECISION, PC BASED MACHINE FOR CALIBRATION OF RING GAUGES AND PLUG, PLAIN AND TAPER THREAD PLUG AND RING GAUGES, EXTERNAL AND INTERNAL MICROMETERS, SNAP GAUGES, GAUGE BLOCKS, DIAL INDICATORS, ELECTRONIC PROBES AND INVOLUTE PROFILE SPLINE GAUGE. IT FULLY COMPLIES WITH ABBE'S COMPARATOR PRINCIPLE AND IT EQUIPPED WITH HIGH ACCURACY HEIDENHAIN GLASS SCALE AND AN TRACTABLE WORKTABLE FOR EASY LOCATION OF INVERSION POINT. THE MEASURING RANGE FOR EXTERNAL IS 680 MM AND FOR INTERNAL IS 480 MM WITH A RESOLUTION OF 0.1 MM (0.01 MM OPTIONAL). ‘MICRONET’ GAUGE MANAGEMENT AND MEASUREMENT SOFTWARE COMES WITH THE MACHINE. THE SOFTWARE FULFILS ISO 9000 NEEDS, GUIDES THE OPERATOR THROUGH ALL CALIBRATION PROCEDURES AND DOES AUTOMATIC TOLERANCES CALCULATION FOR PLAIN, THREAD AND THREAD PIPE (TAPER) GAUGE, BOTH INTERNAL AND EXTERNAL AS PER AMSO/ASME STANDARDS. COMPLETE GAUGE RECORDS CAN BE PROTRACTED INCLUDING CALIBRATION DATE, LOCATION, COST CENTRE WITH SORTING BY ABOVE CRITERIA OR BY CODE. AT THE END OF ANY MEASUREMENT PROCEDURE, THE SOFTWARE ALLOWS TO AUTOMATICALLY PRINT AN INSPECTION REPORT INCLUDING GAUGE DATA, THEORETICAL MEASUREMENT AND ACTUAL MEASUREMENT VALUES.
|
|
BORE MEASURING DEVICE - MUMBAI-BASED TMC MEASURING INSTRUMENTS PRESENTS A BORE MEASURING DEVICE, BMD PLUG GAUGE. THIS ROOFS ENGINEERING INDUSTRY"S MAJOR BORE GAUGING NEEDS WITH WIDE RANGE OF PLUG INCLUDING SPECIAL PURPOSE PLUGS. THE SOLE CONSTRUCTION OF BMD GAUGES ASSURES PERFECT ACCURACY FOR THE MANUAL GAUGING ESPECIALLY IN CLOSE TOLERANCE BORES.THAN ANY OTHER BORE GAUGINH SYSTEM, THE LIFETIME AND REPEATABILITY OF BMD SYSTEM IS MUCH SUPERIOR. IT IS COMPLETELY PORTABLE AND MODULAR. ANY MECHANICAL OR DIGITAL DIAL CAN BE USED WITH BMDS AND ALSO A WIDE RANGE OF ELECTRONIC PROBES AND COMPARATORS ARE AVAILABLE FOR FURTHER ESTIMATION OF DATA. BMD PLUGS ARE ALSO AVAILABLE FOR AUTOMATIC GAUGING WITH ENTRY GROOVES, PILOT TAPER, ETC, AND ACCESSORIES SUCH AS RIGHT ANGLE, DEPTH EXTENSIONS AND GAUGING CONTACT EVERY MEASURING CONDITIONS. DEPENDING ON GAUGING CONDITIONS, PLUG GAUGES WILL STAND UP TO 10,00,00 GAUGING INSERTIONS. NO SPECIAL MAINTENANCE IS REQUIRED. IN CASE OF FOULING OF PLUG THE PLUG CAN BE CLEANED BY BLOWING OF COMPRESSED AIR. THE HYSTERESIS ACCURACY OF THE PLUG IS LESS OR EQUAL TO 0.4 MM AND REPEATABILITY LESS OR EQUAL TO 1 MM.
|
|
ELECTRONIC COMPARATOR - MICRO 102 - THE NEW MICROPROCESSOR-BASED ELECTRONIC COMPARATOR, PRESENTED BY TMC MEASURING INSTRUMENTS PVT. LTD., IS TRACTABLE AND CAN BE ADAPTED FOR A WIDE RANGE OF APPLICATIONS.THE RANGE OF UNIT SELECTABLE IS ±2000/±200MM WITH RESOLUTION OF 1/0.1MM RESPECTIVELY. THE INPUT CHANNELS CAN VARY FROM SINGLE TO FOUR PROBES WITH AUTO MASTERING, PRESET (ANY VALUE WITHIN THE RANGE) ‘HOLD’ AND ‘MEMORY’. STATISTICS LIKE RANGE, MINIMUM, MAXIMUM, MEAN AND STANDARD DEVIATION CAN BE SEEN ON THE LED DISPLAY FOR EACH CHANNEL OR SUMMARY STATISTICS. A PROGRAMMABLE KEYBOARD PERMITS SETTING OF TOLERANCE LIMITS AND AFTER COMPLETING MEASUREMENTS, READINGS MAY BE CLARIFIED AS REQUIRED. IT IS ALSO POSSIBLE TO CUSTOMISE THE DISPLAY TO INDICATE TABLE, SHIMS, GASKETS SELECTION FOR USE IN THE MANUFACTURING PROCESS. THE MICRO 102RS CAN BE USED FOR VARIED APPLICATIONS SUCH AS HEIGHT DIAMETER, STRAIGHTNESS, TAPER AND SQUARENESS MEASUREMENTS. USING A STANDARD RS 232 OUTPUT, THE DEVICE CAN BE LINKED TO A PC FOR FURTHER ADVANCED STATISTICAL PROCESSING OR TO A SERIAL PRINTER.
|
|
MICRO 101/102 - TMC MEASURING INSTRUMENTS PVT LTD PRESENTS ELECTRONIC COMPARATORS MICRO 101 / 102 .THEY ARE AVAILABLE IN 2 MODELS-ANALOGUE AND DIGITAL, AND CAN BE PROVIDED AS PER CUSTOMER’S GUIDELINES AND WITH OUTPUT FOR REGULATING ANY MANUFACTURING OPERATION. COMPARATIVE MEASUREMENTS CAN BE OBSERVED BY THE ELECTRONIC TRANSDUCERS WITH RESPECT TO A MASTER, EITHER BY DIRECTLY MOUNTING THE TRANSDUCERS ON THE STAND, CHECKING THE OUTER DIAMETER BY FIXING IT IN SNAP GAUGE OR CHECKING THE INTERNAL DIAMETER BY FIXING THE TRANSDUCERS IN A MECHANICAL BORE GAUGE OR AN ELECTRONIC PLUG GAUGE.IT AUTOMATICALLY TURNS OFF, IF NOT USED FOR MORE THAN TWO MINUTES, TO EVADE UNNECESSARY BATTERY DISCHARGE. THREE FLASHING LIGHTS IN YELLOW, GREEN AND RED INDICATE THE OVERSIZE AND UNDERSIZE OF THE COMPONENTS. BOTH THE DIGITAL AND ANALOGUE MODELS HAVE SWITCHES FOR SELECTION OF MEASURING RANGE IN BOTH METRIC AND INCH UNITS. THE ANALOGUE UNIT HAS A MEASURING RANGE OF ±10 TO ±1000UM, AND THE DIGITAL UNIT HAS A RANGE FROM ±20 TO ±2000MM. THE UNIT IS SUPPLIED WITH A SMALL SCREWDRIVER FOR THE FINE ADJUSTMENT AND BATTERY ELIMINATOR AND WORKS BOTH ON MAINS AND BATTERY. ALL THE ELECTRONIC COMPARATORS MANUFACTURED BY TMC CAN BE ATTACHED WITH BORE GAUGES OR SNAP GAUGES OR PLUG GAUGES, (ANY MAKE) FOR FASTER , BETTER, AND ACCURATE MEASUREMENTS WITH TOLERANCE SETTING AND LIGHT SIGNALS WHEREIN ALL COMPONENTS CAN BE FASTLY CLASSIFIED INTO REWORK, REJECT SLOTS OR ACCEFIT.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
