|
|
Instrumentation & Control Equipments
|
Suppliers Directory
|
ZWICK ASIA PVT LTD
| | Address : |
3 D SAI KIRAN, 4 KASTURBA NAGAR, FIRST MAIN ROAD ADYAR |
| Telephone : |
044-24414022 |
| Fax : |
91-44- 24410182 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
MACRO EXTENSOMETER - ZWICK ASIA PVT LTD PRESENTS MACRO EXTENSOMETER. IT'S AN ADVANCED DEVELOPMENT OF THE WELL-TRIED ZWICK EXTENSOMETER SYSTEM ADVANCED FOR MATERIAL TESTING MACHINES. THE TRAVEL MEASUREMENT SYSTEM DECIDES THE DEFORMATION BETWEEN TWO POINTS ON, THE SPECIMEN IN THE ELASTIC AND PLASTIC RANGE DURING THE COMPLETE TEST. IT CAN BE USED FOR TENSILE, COMPRESSION AND FLEXURE TESTS. THE EXTENSOMETER HAS EXCLUSIVELY BEEN DESIGNED FOR THE EXTENSION MEASUREMENT ON METALS AND HARD PLASTICS. IT IS SPECIALLY SUITABLE FOR THE DETERMINATION OF THE YOUNG'S MODULES OF ELASTICITY AND OF TECHNICAL ELASTICITY LIMITS.AS AN ADDITION TO THAT IT CAN ALSO BE USED IN TEMPERATURE OR IN ENVIRONMENTAL CHAMBERS RESPECTIVELY. IN CASE OF THE MACRO EXTENSOMETER ONE CAN SELECT BETWEEN TWO TYPES ACCORDING TO THE CASE OF APPLICATION. THE DESIGN AND THE TECHNICAL DATA OF THESE TWO EXTENSOMETERS CORRESPOND TO A GREAT EXTENT. THE MINIMUM INITIAL GAUGE LENGTH IS 10 MM FOR BOTH TYPES, WITH A MEASURING RANGE FROM 80 MM TO 160 MM (DEPENDING ON THE LENGTH OF THE SENSOR ARMS). THE DECISIVE DIFFERENCE IS ONLY THE MAXIMUM INITIAL GAUGE LENGTH OF 100 MM AND 205 MM RESPECTIVELY, AS WELL AS THE OPTIONAL EXTENSION UNITS. AN OPTIONAL EXTENSION UNIT ALLOWS AN AUTOMATIC POSITIONING OF THE SENSOR ARMS ONTO THE SPECIMEN OR BY LIFTING THEM OFF. UNITS ARE ALSO AVAILABLE FOR BEYOND RETROFITTING OF TESTING MACHINES WITH ALL-ROUND ELECTRONICS.
|
|
TABLE-TOP MACHINES FOR COMPLEX TEST JOBS WITH SMALL FORC - ZWICK ASIA PVT LTD PRESENTS TABLE-TOP MACHINES FOR COMPLEX TEST JOBS WITH SMALL FORC.THE MACHINES ARE DESIGNED FOR TENSILE, COMPRESSION, FLEXURE AND CYCLIC TESTS. TWO MACHINES ARE DEVELOPED FOR A NOMINAL LOAD OF 5 KN, AND ANOTHER MACHINE WITH A NOMINAL LOAD OF 100 KN. THE DIFFERENCE BETWEEN THE TWO 5 KN MACHINES IS TO BE FOUND IN THE ELECTRONICS AND IN THE DRIVE UNIT AS WELL AS WITH RESPECT TO THE CROSSHEAD TRAVEL. THE SMALLER ONE OF THE TWO MACHINES WITH A MAXIMUM CROSSHEAD STROKE OF 423 MM IS OUTFITTED WITH THE STANDARD ELECTRONICS WITH AN OUTPUT OF 100 W. IT IS A LOW-COST ALTERNATIVE FOR TEST JOBS WITH SMALL FORCES SPECIALLY FOR THE PAPER AND UNIVERSAL HARDNESS TEST. THE OTHER MACHINE IS OUTFITTED WITH STANDARD ELECTRONICS WITH AN EFFICIENT DRIVE UNIT OF 500 W AND IS THEREFORE, WITH A CROSSHEAD SPEED OF 3,000 MM/MIN, ESPECIALLY SUITABLE FOR ELASTOMERS TESTS. THE THIRD MODEL IS DESIGNED FOR A NOMINAL LOAD OF 100 KN WITH STANDARD ELECTRONICS WITH AN INCREASED SPEED AND AN OUTPUT OF 2 KW. A TYPICAL RANGE OF APPLICATION IS THE CONTROL OF THE GOODS RECEIVED. THIS MACHINE IS A LOWCOST VARIANT FOR SIMPLE CASES OF APPLICATION COMPARED TO THE 100 KN MACHINE WITH THE ALL-ROUND-ELECTRONICS USED SO FAR. ALL THE THREE TESTING MACHINES CAN BE USED WITH OR WITHOUT PC. WHEN BEING USED WITHOUT PC, IT WILL BE A LOW-COST SOLUTION FOR STANDARD CASES OF APPLICATION. WHEN BEING USED WITH A COMMERCIALLY AVAILABLE STANDARD PC AND THE SOFTWARE TEXTXPERT BEING VERY USER-FRIENDLY, TESTING, ANALYSIS AND STATISTICAL DATA PROCESSING ARE GUARANTEED. A WIDE RANGE OF ACCESSORIES ADDITIONALLY PERMITS A WIDE RANGE OF APPLICATIONS.
|
|
UNIVERSAL HARDNESS TEST ATTACHMENT - UNIVERSAL HARDNESS TEST ATTACHMENT IS THE LATEST ATTRACTION FROM ZWICK ASIA PVT LTD. THIS LESS EXPENSIVE VARIANT FOR APPLICATIONS WITH A MAXIMUM WORKING AREA OF 573 MM (WITHOUT FITTINGS). APART FROM THAT, IT DOES NOT DIFFER IN ANY WAY FROM OTHER ZWICKI VERSIONS. TLE BONSAI-ZWICKI IS PERFECTLY USED IN LABORATORIES FOR COMPRESSION AND FLEXURE TESTS WITH SMALL STROKES OF UP TO MAXIMUM 346 MM.THE FUNCTIONALITY AND DESIGN MAKES IT A TYPICAL PAPER AND UNIVERSAL HARDNESS TESTING MACHINE. THE UNIVERSAL HARDNESS HU CAN BE RESOLUTED FOR ALL MATERIALS BY ONE TEST METHOD. THE HARDNESS OF THE DIFFERENT MATERIALS FROM RUBBER TO CERAMICS AND GLASS IS THUS DIRECTLY COMPARABLE. THE UNIVERSAL HARDNESS ATTACHMENT CAN BE USED WITH THE BONSAI ZWICKI OR ANY ZWICK UNIVERSAL TESTING MACHINE. WITH ADDITIONAL ACCESSORIES, OTHER HARDNESS SCALES LIKE ROCKWELL, ROCKWELL-SUPERFICIAL, ETC, CAN BE MEASURED.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
