|
|
Instrumentation & Control Equipments
|
Suppliers Directory
|
TOSHNI-TEK INTERNATIONAL
| | Products : |
Sensors Device,vision Device,measuring Device,controls Device,motion Device,assembly Device,safety Device. |
| Address : |
267 KILPAUK GARDEN ROAD |
| Telephone : |
044-64442126444215 |
| Fax : |
91-44-6448847 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
STATIC ELIMINATION SYSTEM - THIS MEASURES THE SURFACE POTENTIAL OF A TARGET, AND GENERATES IONS TO ELIMINATE THE STATIC CHARGE OF THE TARGET. THE GENERATION OF STATIC ELECTRICITY CAUSES DUST AND DIRT ADHESION THE AREAS OF APPLICATION ARE IN CLEAN ROOM SPOT ELIMINATION OF PARTS, SHEET MATERIAL, PARTS FEEDER, PC BOARD PACKAGING, INJECTION MOULDING MACHINE, FILM MANUFACTURING LINES, ETC. ALSO USEFUL FOR APPLICATIONS SUCH AS STATIC ELIMINATION OF CHIPS DURING TRANSPORTATION, GLASS BOARD TRANSFER, INDEXING TABLE, ETC. THE ELECTRONIC CHARGE INDICATOR ENABLES TO CHECK THE EFFECT OF STATIC ELIMINATOR AT GLANCE. THE SELF-DIAGNOSTIC FUNCTION CHECKS FOR DIRT ON THE ELECTRODE PROBES, ION BALANCE AND ELECTROSTATIC CHARGE OF THE TARGET AND PRODUCES AN ALARM IF NECESSARY.
|
|
STEPPER MOTORS - STEPPER MOTORS(MODEL A STEP A NEW GENRATION WITH CLOSED LOOP CONTROL.THE MOTOR POSITION DETECTION SENSORS CONSTANTLY MONITOR MOTOR MOVEMENTS.THE DRIVER EMPLOYS ADVANCED TECHNOLOGY THAT PRODUCES SMOOTHNESS COMPARABLE TO A MICRO STEPPING DRIVER. THEREFORE ITS VIBRATION LEVEL IS INCREDIBLY LOW,EVEN WHEN OPERATING IN THE LOW SPEED RANGE.SINCE A STEP OPERATES LIKE STEPPING MOTORS,THERE ARE NO PARAMETER SETTING MOTOR,IT HAS NO HUNTING PROBLEMS WHICH WOULD BE PRESENT IN TRADITIONAL SERVO MOTORS. THE A STEP OPERATES IN SYNCHRONISM WITH COMMAND PULSES.THIS MAKES POSSIBLE POSITIONING WITH SHORT STROKES IN A SHORT TIME,AND RESULTS IN HIGH RESPONSE.THE A STEP PROVIDES RESOLUTION OF 0.036 PER STEP WITHOUT ANY DAMPING MECHANISM OR OTHER MECHANICAL DEVICE.THE A STEP LINE HAS 162 VARITIES OF MODELS WITH DIFFERENT GEARED TYPES AND ELECTROMAGNETIC BRAKE MODELS.MODELS WITH VARIOUS POWER SUPPLIES ARE ALSO AVAILABLE.
|
|
PRESSURE SENSORS - THESE PRESSURE SENSORS ARE ELECTRONIC TYPE WITH DIGITAL DISPLAY. THE PRESSURE SENSOR OUTPUTS A SIGNAL WHICH CAN BE USED FOR VARIOUS APPLICATIONS USING AIR-PRESSURE, SUCH AS SUCTION OCNFIRMATION, SEALING CONFIRMATION, LEAKAGE TEST BASE PRESSURE CONTROL, ETC. A 2-COLOUR LED DISPLAY CLEARLY SHOWS ABNORMAL THE PRESSURE SENSORS PROVIDE ANALOGUE OUTPUT (1 TO 5 V) TO RECORD THE PRESSURE DATA. THEY ALSO PROVIDE FOUR CONVENIENT TUNING MODES.
|
|
LASER MICROMETER - THE DEVELOPMENT IN LASER TECHNOLOGY HAS OPENED THE ROAD TO MEASURE DIMENSIONS SUCH AS DIAL, WIDTH, AND THICKNESS VERY ACCURATELY.THE CORRECTNESS ACHIEVED USING NON-CONTACT METHOD OF MEASURING IS IN THE ORDER OF MICRONS. USING KEYENCE'S LASER MICROMETER MINUTE TARGETS CAN BE FOUND AND MEASURED DUE TO ITS EXTREMELY PARALLEL LASER BEAM. THE RESOLUTION VARIES FROM 0.2 TO 20 MICRONS FOR DIFFERENT MODELS. THE CONTROLLERS HAVE DIGITAL READOUT, ANALOGUE OUTPUT, ALARM OUTPUT AND SOME MODELS HAVE RS-232C INTERFACE FOR REMOTE OPERATION THROUGH PERSONAL COMPUTER. MICROMETERS ARE VERY USEFUL FOR ON-LINE AS WELL AS OFF-LINE APPLICATIONS. MICROMETER'S CONTROLLERS HAVE LIMIT SETTING, AVERAGING, PARAMETER CHANGING AND OTHER CHARECTERISTICS. IN ON-LINE APPLICATIONS, THE OUTPUT OF THE CONTROLLER CAN BE FED BACK TO OTHER SYSTEMS AND THE PROCEEDING CAN BE AUTOMATED. THESE INSTRUMENTS ARE USED IN AUTOMOBILE, TYRE, METAL/STEEL, FOOD/PACKAGING, CABLE, RUBBER/PLASTIC, TAND ELECTRONIC INDUSTRIES.
|
|
METAL PLATE DETECTOR, DOUBLE F - DOBLE F METAL PLATE DETECTOR IS THE LATEST ATTRACTION FROM TOSHNI-TEK INTERNATIONAL. DOUBLE FED METAL PLATE DETECTOR (DD SERIES) IS ONE OF THE INTELLIGENCE DEVICES FROM KEYENCE THAT LEADS AUTOMATED PRODUCTION PROCESS. SOME OF THE BENEFITS OF DD SERIES ARE IT DETECTS OVERLAPPING OF FRAMES, SHEETS, FOILS, PIPES, ETC. IT ALSO FINDS EXCESS OR REDUCTION IN QUANTITY OF FOILS, FRAMES,SHEETS ETC, WHICH ENHANCES PRECAUTIONARY STEPS TO BE TAKEN. DD CAN BE USED IN ALUMINIUM, PIPE, STEEL, ELECTROPLATING, METAL FORMING, SHEET METAL INDUSTRIES, ETC. CONTROL OUTPUT CAN BE CONNECTED TO A PLC FOR FURTHER PROCESS CONTROL. THESE DETECTORS ARE HIGH PRECISION SENSORS WHICH FEATURE A COMPACT SENSOR HEAD AND AN AMPLIFIER. DD SERIES ARE OF TWO TYPES- 2-HEAD TYPE AND 1-HEAD TYPE. THE DETECTOR CAN BE SET TO DIFFERENT TARGET THICKNESS AND RESPONSE TIME CAN BE MODIFIED. IT DETECTS THE DOUBLE FED METAL PLATES WITH VARIOUS THICKNESSES (0.01 MM TO 10 MM), AND THE OUTPUT LEVELS CAN BE CORROBORATED BY USING BARGRAPH.
|
|
METAL PLATE DETECTOR, DOUBLE FED - DD SERIES - TOSHNI-TEK PRESENTS METAL PLATE DETECTOR, DOUBLE FED-DD SERIES. IT IS ONE OF THE INTELLIGENCE DEVICE FROM KEYENCE THAT DIRECTS TODAY'S AUTOMATED PRODUCTION PROCESS. SOME OF THE APPLICATIONS OF DD SERIES ARE, IT OBSERVES OVERLAPPING OF SHEETS, FOILS, FRAMES, PIPES, ETC. IT ALSO EXAMINES EXCESS OR REDUCTION IN QUANTITY OF FOILS, SHEETS, FRAMES, ETC, WHICH INTENSIFES PRECAUTIONARY STEPS TO BE TAKEN. IT CAN BE USED IN PIPE, STEEL, ELECTROPLATING, ALUMINIUM, METAL FORMING, SHEET METAL INDUSTRIES, ETC. CONTROL OUTPUT CAN BE CONNECTED TO A PLC FOR FURTHER PROCESS CONTROL. THESE DETECTORS ARE HIGH PRECI- SION SENSORS WHICH FEATURE A COMPACT SENSOR HEAD AND AN AMPLIFIER. DD SERIES COMES IN TWO TYPES, 2-HEAD TYPE AND 1-HEAD TYPE. DETECTORS CAN BE PROGRAMMED TO DIFFERENT TARGET THICKNESS AND RESPONSE TIME CAN BE ADJUSTED. IT DETECTS THE DOUBLE FED METAL PLATES WITH VARIOUS THICKNESS (0.01 MM TO 10 MM) AND THE OUTPUT LEVELS CAN BE CONFIRMED USING BAR GRAPH.
|
|
METAL PLATE DETECTORS - DD SERIES - TO GUIDE AUTOMATED PRODUCTION PROCESS TOSHNI-TEK INTERNATIONAL PRESENTS METAL DETECTORS,DD SERIES.
THESE ARE HIGH PRECISION SENSORS WHICH MARK A COMPACT SENSOR HEAD AND AN AMPLIFIER. 2-HEAD TYPE AND 1-HEAD TYPE ARE THE 2 TYPES FROM THEM.THE DETECTORS CAN BE SET TO DIFFERENT TARGET THICKNESS AND RESPONSE TIME CAN BE REVISED. IT DETECTS THE DOUBLE FED METAL PLATES WITH VARIOUS THICKNESSES AS SMALL AS 30 X 30 MM AND THE OUTPUT LEVELS CAN BE VALIDATED USING BARGRAPH. SOME OF THE ADVANTAGES OF DD SERIES ARE, IT DETECTS OVERLAPPING OF SHEETS, PIPES, FOILS, FRAMES ETC. IT ALSO DETECTS EXCESS OR REDUCTION IN QUANTITY OF FOILS, SHEETS, FRAMES, ETC, WHICH ENHANCES PRECAUTIONARY STEPS TO BE TAKEN. IT CAN BE USED IN ALUMIN-IUM, PIPE, STEEL, ELECTROPLATING, METAL FORMING, SHEET METAL INDUSTRIES, ETC. CONTROL OUTPUT CAN BE CONNECTED TO A PLC FOR FURTHER PROCESS CONTROL.
|
|
MONITOR MICROSCOPE - MODEL VH-63 - KEYENCE PRESENTS PORTABLE MONITOR MICROSCOPES (VH SERIES) OTHER THAN MEASURING INSTRUMENTS AND SENSORS FOR INDUSTRIAL LABORATORY APPLICATIONS. TO ZOOM IN THE MICROWORLD ANYWHERE. KEYENCE MONITOR MICROSCOPES ARE USEFUL. THEY ARE USED TO STUDY THE SURFACE OF OBJECTS LIKE METALS, BIOMEDICAL APPLICATIONS, GLASS AND TEXTILES, PCBS . EXTRA SHARP 3D IMAGE WITH SUPERIOR EXTRA WIDE DEFINITION AND DEPTH OF FIELD IS CONCEIVABLE WITH KEYENCE MICROSCOPE.IMAGE IS CLEARLY DISPLAYED ON THE MONITOR ONCE THE CCD CAMERA IS PLACED ON THE OBJECT. CONCURRENT OBSERVATION BY MORE THAN ONE PERSON IS POSSIBLE. THE LENS IS ATTACHED TO A CCD CAMERA WHICH TRANSFERS THE IMAGE OF THE OBJECT THROUGH A FIBREOPTIC CABLE OF 1.5 M LENGTH. MODEL VH-6300 HAS A BUILT-IN 6"LCD COLOUR MONITOR AND HALOGEN LAMP. THE RESOLUTION OF THIS MICROSCOPE IS 480 (H) X 350 (V) AND THE PICTURES CAN BE STORED IN 3.5"IBM COMPATIBLE FLOPPY DISK. WITH STANDARD JPEG FORMAT, THE RECORDED PICTURES CAN BE RETRIEVED ON PC FOR FURTHER ANALYSIS AND FUTURE REFERENCES. PARAMETERS LIKE LENGTH, ANGLE, X-Y DISTANCE, AREA, AND RADIUS CAN BE MEASURED. ALL THE OPERATIONS CAN BE DONE THROUGH BUILT-IN KEY PAD OR WITH A MOUSE, WHICH CAN BE ATTACHED TO THE MICROSCOPE. WITH SPLIT FUNCTION THE SCREEN CAN BE SPLIT INTO TWO PARTS . THIS HELPS TO COMPARE THE STANDARD STRUCTURE WITH THE STRUCTURE UNDER OBSERVATION RIGHT ON THE MICROSCOPE. THE VIDEO OUTPUT FROM MICROSCOPE CAN BE FED TO ANY MONITOR, VCR OR A VIDEO PRINTER. KEYENCE ALSO OFFERS A VIDEO PRINTER FROM WHICH 16.7 MILLION COLOUR PRINTOUTS CAN BE TAKEN. MAGNIFICATION FROM 2OX TO 1,OOOX CAN BE OBTAINED USING STANDARD MAGNIFICATION LENSES. ADDITIONALLY, SPECIAL ACCESSORIES LIKE NON-REFLECTIVE LENS, ZOOM LENS FROM 25X TO 2,50OX, BORESCOPE TO STUDY THE DRILLED BORES, CAVITIES AND NARROW PATHS, ETC, AND FIBERSCOPE'S FLEXIBLE CABLES THAT HELP TO STUDY THE BENT DEEP AREAS ARE AVAILABLE FROM KEYENCE.
|
|
MONITOR MICROSCOPE - MONITOR MICROSCOPES ARE THE LATEST ATTRACTIONS FROM TOSHNI-TEK INTERNATIONAL.THIS IS IN ASSOCIATION WITH
KEYENCE , THE COMPANY WHICH MANUFACTURES MEASURING INSTRUMENTS AND SENSORS FOR INDUSTRIAL AND LABORATORY APPLICATIONS. THESE ARE VERY USEFUL TO ENLARGE THE MICROWORLD ANYWHERE, ANY TIME, ANY PLACE. THEY ARE WIDELY USED TO COGITATE THE SURFACE OF ANY OBJECT LIKE METALS, GLASS, TEXTILES, PCBS, BIO-MEDICAL APPLICATIONS, ETC. EXTRA SHARP 3-D IMAGE WITH PREFERRED EXTRA WIDE DEFINITION AND DEPTH OF FIELD IS POSSIBLE WITH KEYENCE MICROSCOPES. IMAGE WITH CLARITY IS DISPLAYED ON THE MONITOR ONCE THE CCD CAMERA IS PLACED ON THE OBJECT. SIMULTANEOUS OBSERVATION BY MORE THAN ONE PERSON IS POSSIBLE. THE MAGNIFICATION FROM 20X TO 1000X CAN BE OBTAINED USING STANDARD MAGNIFICATION LENSES. IN ADDITION TO THAT SPECIAL ACCESSORIES LIKE, NON-REFLECTIVE LENS, ZOOM LENS FROM 25X TO 175X, BORESCOPE TO STUDY THE DRILLED BORES, CAVITIES AND NARROW PATHS, ETC, AND FIBRESCOPE'S FLEXIBLE CABLE ENABLES TO STUDY THE BENT DEEP AREAS, ARE AVAILABLE FROM KEYENCE.
|
|
MONITOR MICROSCOPE - KEYENCE PRESENTS MONITOR MICROSCOPES, OTHER THAN MEASURING INSTRUMENTS AND SENSORS FOR INDUSTRIAL AND LABORATORY APPLICATIONS. THESE ARE USEFUL TO ENLARGE OR MAGNIFY THE MICROWORLD ANYWHERE, ANY PLACE, ANY TIME. THEY ARE EXPANSIVELY USED TO STUDY THE SURFACE OF ANY OBJECT LIKE METALS, GLASS, TEXTILES, PCBS, BIO-MEDICAL APPLICATIONS, ETC. EXTRA SHARP 3-D IMAGE WITH SUPERIOR EXTRA WIDE DEFINITION AND DEPTH OF FIELD IS POSSIBLE WITH KEYENCE MICROSCOPES. CLEAR IMAGE IS DISPLAYED ON THE MONITOR ONCE THE CCD CAMERA IS PLACED ON THE OBJECT. SIMULTANEOUS WATCHING BY MORE THAN ONE PERSON IS POSSIBLE. THE MAGNIFICATION FROM 20X TO 1000X CAN BE OBTAINED USING STANDARD MAGNIFICATION LENSES. ADDITIONALLY SPECIAL ACCESSORIES LIKE, ZOOM LENS FROM 25X TO 175X, BORESCOPE TO STUDY THE DRILLED BORES, NON-REFLECTIVE LENS, CAVITIES AND NARROW PATHS, ETC, AND FIBRESCOPE'S FLEXIBLE CABLE ENABLES TO STUDY THE BENT DEEP AREAS, ARE AVAILABLE FROM KEYENCE.
|
|
THERMOMETER, ON-LINE NON-CONTACT INFRARED TYPE - MA - RAYTEK, UNITED STATES IN ASSOCIATION WITH TOSHNIWAL INDUSTRIES PRESENTS ON-LINE NON CONTACT INFRARED TYPE- MA.TOSHNIWAL INDUSTRIES INTRODUCED THE MARATHON SERIES OF INFRARED THERMOMETERS MANUFACTURED BY RAYTEK, U,S.A. THESE BELONG TO A GROUP OF UNIQUE NON-CONTACT TEMPERATURE MEASURING INSTRUMENTS MAINLY DESIGNED FOR HARSH OPERATING ENVIRONMENTS. THEY AGGLOMERATE SUPERIOR PERFORMANCE WITH THE BEST DIGITAL TECHNOLOGY. THESE INTEGRATED UNITS OFFER SMART DIGITAL ELECTRONICS, WIDE TEMPERATURE RANGESADVANCED ELECTRO-OPTICS AND A BUILT-IN USER INTERFACE IN A RUGGED, COMPACT HOUSING. TWO MODELS, MA1S AND MA2S, COVER TEMPERATURE RANGES OF 500&176; TO 3000&176;C AND 250&176; TO 2000&176;C RESPECTIVELY, AND PROVIDE FAST, REAL-TIME MONITORING FOR MEDIUM AND HIGH TEMPERATURE APPLICATIONS. MARATHON RATIO (TWO COLOUR) THERMOMETERS (MR1S) WITH THREE MODELS TO COVER TEMPERATURE RANGE OF 600&176; TO 3000&176;C ARE USED WHERE THE TARGET IS SMALL, MOVING OR OBSTRUCTED DUE TO DUST, SMOKE AND OTHER PARTICULATES IN THE ATMOSPHERE. THE UNIQUE "TWO COLOURS TWO WAY"FEATURE ENABLES SWITCHING BETWEEN ONE COLOUR AND TWO COLOUR OPERATION WHICH SIMPLIFIES SETUP AND PROVIDES CONTINUED MEASUREMENT FLEXIBILITY. MARATHON FIBRE OPTIC RATIO THERMOMETER (MRIF) IS OFFERED IN VARIOUS MODELS TO COVER TEMPERATURE RANGE OF 650&176; TO 3000&176;C AND ALLOWS MEASUREMENT OF TARGETS THAT WOULD BE OTHERWISE INACCESSIBLE BECAUSE OF SPACE CONSTRAINTS OR HARSH ENVIRONMENTS. THESE THERMOMETERS HAVE FAST RESPONSE TIMES DOWN TO 1 MSEC AND SUPERIOR OPTICAL RESOLUTION OF 300:1. THEY ALLOW BIDIRECTIONAL RS-485 SERIAL COMMUNICATIONS BETWEEN THE CONTROL ROOM AND THE FACTORY FLOOR. THEY COME STANDARD WITH FIEID CALIBRATION, HARDWARE DIAGNOSTICS AND COMMUNICATION UTILITY SOFTWARE. OPTIONAL DATA TEMPERATURE SOFTWARE FACILITATES USE OF THE SMART DIGITAL COMMUNICATIONS FEATURES AND ALLOWS REMOTE MONITORING TREND PLOTTING, DATA LOGGING, SENSOR SETUP, PROCESS ALARMING AND STATISTICAL PROCESS CONTROL.
|
|
TWO-PIECE INFRARED TEMPERATURE MONITORING SYSTEM - THERMALERT - TOSHNIWAL INDUSTRIES PRESENTS THE RAYTEK THERMALERT GP, A PLIABLE TWO-PIECE INFRARED TEMPERATURE MONITORING SYSTEM. THIS LOW-COST SYSTEM CONGLOMERATES THE COMPACT IA", DIN GP MONITOR WITH AN OPTION OF SENSING HEADS TO CATER TARGET NON-CONTACT TEMPERATURE READINGS WITH 1% ACCURACY. TEMPERATURE DATA IS DISPLAYED ON THE EASY-TO-READ 4DIGIT LED DISPLAY AND ALL MONITOR AND SENSOR DUTIES ARE EASILY CONFIGURED VIA THE USER INTERFACE ON THE FRONT PANEL. THE GP MONITOR HAS A HOST OF FEATURES INCLUDING 4-20 MA OUTPUT SIGNAL CONDITIONING (PEAK/VALLEY/AVERAGE), ADJUSTABLE OFF-SET AND TWO ADJUSTABLE SETPOINTS WITH DEADBANDS WITH ALARM OUTPUTS. THE MONITOR RECEIVES UNIVERSAL 110-220 V AC, POWER, AND PROVIDES AND EXCITATION VOLTAGE OF 24 V DC AT 50 MA FOR EXTERNAL SENSORS (EG, RAYTEK'S 2-WIRE IR THERMOMETER, TX). THE GP MONITOR HAS BEEN DESIGNED TO COMPLEMENT OTHER RAYTEK THERMALERT NON-CONTACT SENSORS BY ACCEPTING EITHER O-5 V OR 4-20 MA SIGNALS FROM ANY DEVICE. WHEN TWINED WITH A THERMALERT CI OR TX SENSAR, THE GP MONITOR ACTS NOT ONLY AS A PANEL METER. BUT ALSO AS A SIGNAL CONDITIONER, AND AS THE POWER SUPPLY. FOR THERMALERT ET AND THE HIGHER PERFORMANCE MARATHON SERIES SENSORS, THE GP MONITOR PROVIDES A BRIGHT LOCAL DISPLAY OF THE PRPCESS READINGS AND RETRANSMISSION OF THE 4-20 MA SIGNALS. THE GP REGULAR HEAD (GPR) SENSOR IS A COMPACT 8-14 MICRON BED WHICH PROVIDES CURRENT LOOP DRIVEN SIGNALS FOR LOW-NOISE CABLING AND 35:L STANDARD FOCUS OPTICS. THE TEMPUAORLRE MEASUREMENT RANGE OF THE SENSOR IS - 18 TO 540&176;C. THE GPR HAS A DETACHABLE CABLE AND IS RATED NEMA 4 (IP65).
|
|
COMPACT VISION SYSTEM - TOSHNI-TEK INTERNATIONAL PRESENTS KEYENCE COMPACT VISION SYSTEM, WHICH IS INFACT A REPLACEMENT FOR CONVENTIONAL IMAGE PROCESSING SYSTEMS. IT WORKS ON GRAY SCALE IMAGING SO THE RESOLUTION IS HIGH. VISION SYSTEM (CV SERIES) HAS A CONTROLLER, CAMERA (WITH LENSES) AND REMOTE CONSOLE. THE FEATURED PRODUCT FINDS APPLICATION IN ALL INDUSTRIES. IT IS BASICALLY USED FOR FOOL PROOF CHECKING OF DIFFERENT PARAMETERS IN PRODUCTION LINES. SOME OF THE APPLICATIONS ARE ARE AS FOLLOWS, CHECKING PRESENCE OF PRINT MARKS, PRESENCE OF LABEL, ORIENTATION OF PRODUCTS/LABELS, CHECKING MISSING OPERATIONS, ETC. FOR A COMPLETE ON-LINE CHECKING, KEYENCE VISION SYSTEM IS AN ECONOMICAL SOLUTION.
|
|
LASER DISPLACEMENT SENSOR/ METER - TOSHNI-TEK INTERNATIONAL INTRODUCES KEYENCE LASER DISPLACEMENT SYSTEM. THIS AVAILS NON-CONTACT, ACCURATE AND FAST THICKNESS MEASUREMENT OF A HARD, SOFT OR MOVING OBJECT, IN THE LINE OF PRODUCTION. THE OTHER TYPICAL APPLICATIONS ARE MEASUREMENT OF DISPLACEMENT, ECCENTRICITY, COATING THICKNESS, SURFACE RUN-OUT, POSITIONING A ROBOT ARM, CHECKING THE PRESENCE OR ABSENCE, SURFACE FINISH, ETC. THESE INSTRUMENTS ARE WIDELY USED IN AUTOMOBILE INDUSTRIES, RUBBER/PLASTIC, PACKAGING INDUSTRIES, STEEL INDUSTRIES, AUTOMATION APPLICATION, LABS FOR CALIBRATION PURPOSE, ETC. ON REFLECTIVE PRINCIPLE THE SYSTEM WORKS. THE SPOT DIAMETER OF THE LASER BEAM WITH REDUCED SCATTER ASSURES PRECISION MEASUREMENT ON VIRTUALLY ANY TYPE OF SURFACE. THE RESOLUTION OF LASER DISPLACEMENT SYSTEM VARIES FROM 0.01 MICRON TO 50 MICRON WITH COMPACT CONTROLLER, WHICH IS SUITED FOR VARIETY OF APPLICATIONS. THE ANALOGUE OUTPUT CAN BE FED BACK TO CONTROL OTHER OPERATIONS AND ALARM OUTPUT CAN BE USED AS AN INDICATION OF TOLERANCE CROSSING. SOME MODELS HAVE RS 232C INTERFACE FOR REMOTE OPERATION THROUGH PERSONAL COMPUTERS AND DIGITAL DISPLAY. THE APPLYING OF THE DISPLACEMENT SENSORS/METERS ARE LIMITED ONLY ON USER'S CREATIVITY. CONTACT TYPE DIAL GAUGES AND LVDTS ARE BEING REPLACED BY NON-CONTACT DISPLACEMENT SENSOR.
|
|
VISION SYSTEMS - TOSHNI-TEK INTERNATIONAL PRESENTS COMPACT VISION SYSTEMS (CV SERIES) FROM KEYENCE FORPN, JAPAN. THESE VISION SYSTEMS ARE REPLACEMENT FOR CONVENTIONAL IMAGE PROCESSING SYSTEMS. THEY WORK ON GREY SCALE IMAGING BECAUSE OF WHICH THE RESOLUTION IS VERY HIGH. THE VISION SYSTEMS HAS CONTROLLERS, CAMERAS (WITH LENSES) AND REMOTE CONSOLES. THEY FIND APPLICATION IN ALL INDUSTRIES AND ARE USED FOR FOOLPROOOF CHECKING OF VARIOUS PARAMETERS IN PRODUCTION LINE. OTHER APPLICATIONS OF THE COMPACT VISION SYSTEMS ARE: CHECKING PRESENCE OF PRINT MARKS, PRESENCE OF LABEL, ORIENTATION OF PRODUCTS/LABELS, CHECKING MISSING OPERATIONS, ETC.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
