|
|
Instrumentation & Control Equipments
|
Suppliers Directory
|
DELTA CONTROL ENGINEERING CORPORATION
Suppliers Of Instrumentation Like Wattmeters And Electrical Testing Module.
| | Products : |
Wattmeters And Electrical Testing Module |
| Address : |
B- 216, SHREYAS INDUSTRIAL ESTATE, NEXT TO JAY COACH, W E HIGHWAY, GOREGAON (E), |
| Telephone : |
91-22-26854174 |
| Fax : |
91-22-26854666 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
ELECTRICAL TESTING MODULE FOR HEAVY APPLIANCES - DELTA CONTROL ENGINEERING CORPORATION OF MUMBAI HAS INTRODUCED THE SELF-CONTAINED ELECTRICAL TESTING MODULE FOR HEAVY-DUTY APPLIANCES SUCH AS AIR-CONDITIONERS, SINGLE-PHASE PUMPS, AND HEATERS AMONG OTHERS. THE RATINGS FOR MODULES UP TO 0-250V/20A/2.000KW + 5.00KW IS 1W AND UP TO 5.00KW IS 10W. IT IS PROTECTED AGAINST HEAVY STARTING CURRENTS AND SHORT-CIRCUITS. THERE IS A LOAD ON/OFF CONTROL SWITCH. THE UNIT CAN BE CONVENIENTLY LOCATED BELOW THE TEST-BENCH ON WHICH THE APPLIANCE IS KEPT.
|
|
DIGITAL OHMMETERS, SINGLE-RAN - DELTA CONTROL ENGINEERING CORPORATION HAS INTRODUCED THE SINGLE-RANGE FOUR-WIRE DIGITAL OHMMETERS IN 92MM X 46MM CUT-OUT. THE DISPLAY IS 3½ DIGITS, IN 12.5MM LEDS. THE ACCURACY IS CLASS: 0.25. IT REQUIRES MAINS SUPPLY OF 230V AC. THE AVAILABLE RANGES ARE 2.000 OHMS/20.00 OHMS/200.0 OHMS/2000 OHMS. IT IS ECONOMICALLY PRICED. APPLICATIONS ARE MAINLY IN ELECTRICAL EQUIPMENT MANUFACTURE WHERE FOR A LINE OF PRODUCTS, RESISTANCES TO BE MEASURED ARE WITHIN ONE DECADE.
|
|
MAINS LINE PARAMETERS INDICATOR - MUMBAI-BASED DELTA CONTROL ENGINEERING CORPORATION HAS INTRODUCED MICRO-CONTROLLER BASED LINE PARAMETERS INDICATOR FOR V/HZ. APPLICATIONS RANGE FROM SERVO-STABILIZERS TO TEST EQUIPMENT, STAND-ALONE INDICATORS IN FACTORIES TO SWITCHBOARDS. THE PANEL CUT-OUT SIZE IS 92 MM X 46 MM. LINE FREQUENCY IS UP TO 99.9HZ, WITH RESOLUTION/ACCURACY OF ±0.1 HZ; VOLTAGE INDICATION HAS A RESOLUTION OF 1 V AND ACCURACY OF CLASS 0.5. THE SUPPLY VOLTAGE CAN BE FROM 180V TO 260V. THE DISPLAYS ARE 10 MM LEDS. THE DEVICE HAS A SELECTOR FOR EXTERNAL VOLTAGE INPUT OR LINE VOLTAGE READOUT. WHEN AN EXTERNAL VOLTAGE IS APPLIED, THE RANGE IS FROM 0 TO 500V.
|
|
WATTMETERS, 1/2 DIN COMPACT DIGITAL - DELTA CONTROL ENGINEERING CORPORATION, WHICH HAS BEEN MANUFACTURING DIGITAL WATTMETERS IN INDIA FOR THE LAST 22 YEARS, HAS NOW INTRODUCED THE COMPACT 3½ DIGITS WATTMETERS IN 92MM X 46MM CUT-OUT. THESE DEVICES ARE THREE-TERMINAL WATTMETERS, SUITABLE FOR VERY WIDE RANG OF PF APPLICATIONS FROM ±0.2 TO UNITY. THE AVAILABLE RANGES, WITHOUT THE USE OF CTS, ARE 20.00W, 200.0W AND 2000W. WITH THE USE OF EXTERNAL CTS, THE RANGE CAN BE EXTENDED SUITABLY. MODEL 1WT-5A WITH THE RATINGS OF 440V/5A/200W IS SUITABLE FOR THREE-PHASE THREE-WIRE APPLICATIONS, IN WHICH TWO OF THESE INSTRUMENTS ARE USED. THESE WATTMETERS ARE OF HIGH STABILITY TYPE, LOW INSERTION LOSS AND ARE OF CLASS:0.5 ACCURACY.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
