|
|
Instrumentation & Control Equipments
|
Suppliers Directory
|
TEMPSENS INSTRUMENT PRIVATE LIMITED
Exporters Of Temparature Sensors Thermocouples, Pyrometres Ceramic Tubes Etc.
| | Address : |
MIA B-188 A, ROAD NO 5, UDAIPUR - 313 003, INDIA |
| Telephone : |
+(91)-(294)-492127/492128/4921 |
| Fax : |
+(91)-(294)-26649 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
INFRARED THERMOMETER, RANGE 100-2500 C - THE NEW INFRATHERM IN 5/5 PLUS IS IMPAC'S COMPACT DIGITAL INFRARED THERMOMETER IS APPLICABLE FOR UNTOUCHED TEMPERATURE MEASUREMENT IN THE GLASS INDUSTRY FROM 100 TO 1300 C AND 400 TO 2500 C. THESE MEASURING RANGES CAN BE NARROWED TO AT LEAST 51 C. IT IS CONSISTS WITH AN RS 232 OR RS 485 INTERFACE. AN INTEGRATED LASER PILOT LIGHT IS A DEVICE WHICH IS "ON" THROUGHOUT THE MEASUREMENT CYCLE. IT CONSISTS WITH FIXED OPTICS SMALL OBJECTS UP TO 2.5 MM DIAMETER CAN BE MEASURED. THE RESPONSE TIME IS 80 MS. THE DIGITAL INFRARED THERMOMETER GIVES ACCURACY THAN ITS PREVIOUS ANALOGUE MODEL. STANDARD FEATURES ON ALL MODELS CONSISTS WITH INTEGRATED MIN/MAX VALUE STORAGE AS WELL AS AN ANALOGUE OUTPUT (0 OR 4 TO 20 MA). IT CAN BE SET IN STEPS OF 1%. THE INCLUDED INFRA WIN SOFTWARE GIVES RIGHT SET-UP AND MONITORING THE SUB-RANGES, RESPONSE TIME, CLEAR TIMES FOR THE MM/MAX VALUE STORAGE, THERMOMETER ADDRESS, BAUD RATE AND INTERNAL DEVICE TEMPERATURE AND ALL EMISSIVITY, RESPONSE TIME, AND ONLINE/ OFFLINE MODE CAN BE TUNED DIRECTLY AT THE INSTRUMENT. THE IN 5/5 PLUS IS AVAILABLE IN STAINLESS STEEL HOUSING. LIGHT, COMPACT (410 G; 114.5 X 49.5 MM SIZE, AND COMBINED WITH ACCESSORIES, SUITABLE FOR A WIDE RANGE OF APPLICATIONS. THE RS 485 INTERFACE GIVES THE BASIS FOR THE INTEGRATION OF THE NEW IN 5 PLUS IN AUTOMATED MEASURING AND CONTROL SYSTEMS. WITH THIS INTERFACE, 32 THERMOMETERS CAN BE ATTACHED WITH THE NETWORK, AND CAN BE INTEGRATED INTO ALL COMMON BUS SYSTEMS. IMPAC HAS ALSO INTRODUCED THE INTERFACE PROTOCOL TO INTEGRATE IT WITH THEIR EXISTING USER-SOFTWARE.
|
|
SPECIAL PYROMETER FOR ALUMINIUM EXTRUSION INDUSTRY - TEMPTENS IS WORKING WITH 3T-TRUE TEMPERATURE TECHNOLOGY,ISREAL,FOR SPECIAL PYROMETER FOR THE ALUMINIUM INDUSTRY.3T PRROMETER IS TOTALLY NEW PRODUCT TO REMOTE TEMPERATURE MEASUREMENT,PROVIDING HIGHLY ACCURATE,NON CONTACT MEASUREMENT FOR TRUE ALUMINIUM REGARDLESS OF TARGET EMISSIVITY AND INTERMIDIATE CONDITION,IS USED TO HANDLE THE UNSTABLE TARGET FOR THE ALUMINIUM,STEEL,AND OTHER METAL INDUSTRIES AND STILL SO THE TARGET TEMPERATURE BETWEEN 300-1000;C OF ALUMINIUM PROFILE OF THE PRESS EXIT;FOR MEASURING THE TRUE TEMPERATURE BETWEEN 300-1000;C OF ALUMINIUM BILLETS INSTALLED AT THE FURNACE EXIT OR BEFORE THE BILLET LOADER;AND FOR MEASURING THE TRUE TEPERATURE BETWEEN 200-400;C OF ALUMINIUM PROFILE AT THE COOLING TABLE.IT HAS A TEMPERATURE ME MEASUREMENT ERROR OF LESS THAN 1%REGARDLESS OF EMISSIVITY OR INTERMIDIATE CONDITION AND FLUCTION.
|
|
ANALOGUE BOUNDARY-SCAN - JTAG TECHNOLOGIES HAS INTRODUCED THE PRODUCT FOR MIXED-SIGNAL BOUNDARY-SCAN TESTING. WITH THIS GROUNDBREAKING PRODUCT, ANALOGUE DESIGNERS AND TEST ENGINEERS WILL BE GUIDED TO EXPLORE AND EXPLOIT THE CAPABILITIES OF IEEE 1149.4 THE STANDARD FOR ANALOGUE TESTING VIA BOUNDARY-SCAN. JTAG-1149.4 EXPLORER IS AN EASY-TO-USE EVALUATION SYSTEM PROVIDING WITH A SAMPLE MIXED-SIGNAL APPLICATION BOARD, BOUNDARY-SCAN CONTROLLER, AND A GRAPHICAL SOFTWARE MEASUREMENT ENVIRONMENT. THE SAMPLE APPLICATION BOARD CONSISTS 1149.1- AND 1149.4- COMPLIANT ICS AS WELL AS ANALOGUE INSTRUMENTATION PROVIDING A CURRENT GENERATOR, ANALOGUE TO DIGITAL CONVERTER, DIGITAL TO ANALOGUE CONVERTER, AND AN AC-SIGNAL SOURCE. THE SYSTEM SET UP THE USER TO PERFORM RESISTANCE, CAPACITANCE, VOLTAGE, AC-SIGNAL AND CHARACTERISTIC IMPEDANCE MEASUREMENTS WITHOUT THE REQUIREMENT FOR ADDITIONAL HARDWARE.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
