INDUSTRIAL VALVES
Manufacturer And Exporters Of Needle Valves, Check Valves, Ball Valves, Valve Manifolds, Tube Fittings, Gauge Adaptors, Monoflange, Thermo Wells
|
| Products : |
Needle Valves, Check Valves, Ball Valves, Valve Manifolds, Tube Fittings, Gauge Adaptors, Monoflange, Thermo Wells |
| Address : |
VIJAY INDL. EST., NO. 215/ 216, LINK ROAD, CHINCHOLI BUNDER, MALAD (W), |
| Telephone : |
91-22-28757831/2875783291-22-28739960/28720122 |
| Fax : |
91-228739961 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
2 VALVE ANGLE TYPE - EACH VALVE IS 100% TESTED WITH NITROGEN AT 1000 PSI (6800 KPS.) FOR LEAKAGE AT THE SEAT AND PACKING. EACH TEST IS PERFORMED TO A MAXIMUM ALLOWABLE LEAK RATE 0.1 SEC./ MIN.
|
|
VALVES MANIFOLD - 2 VALVES, 3 VALVES, 5 VALVES, BLOCK, BLEED, BALANCE, CONTROL AND CALIBRATION.
|
|
NEEDLE VALVES - AVAILABLE IN SCREWED, INTEGRAL, UNION IN OPTIONAL VENTS.
|
|
BALL VALVES - AVAILABLE THREE PIECE BODY DESIGN IN NOMINAL RANGE OF 6MM TO 25MM. SCREWED NPT / BSP / BSPT MALE FEMALE THREADS & TUBE END CONNECTIONS OR COMBINATIONS.
|
|
2 VALVE MANIFOLD INLINE TYPE - EACH VALVE IS 100% TESTED WITH NITROGEN AT 1000 PSI (6800 KPS.) FOR LEAKAGE AT THE SEAT AND PACKING. EACH TEST IS PERFORMED TO A MAXIMUM ALLOWABLE LEAK RATE 0.1 SEC./ MIN.
|
|
3 VALVE MANIFOLD - EACH VALVE IS 100% TESTED WITH NITROGEN AT 1000 PSI (6800 KPS.) FOR LEAKAGE AT THE SEAT AND PACKING. EACH TEST IS PERFORMED TO A MAXIMUM ALLOWABLE LEAK RATE 0.1 SEC./ MIN. PRESSURE RATING OF 413 BAR.
|
|
5 VALVE MANIFOLD WITH 3 TOP BONNETS - EACH VALVE IS 100% TESTED WITH NITROGEN AT 1000 PSI (6800 KPS.) FOR LEAKAGE AT THE SEAT AND PACKING. EACH TEST IS PERFORMED TO A MAXIMUM ALLOWABLE LEAK RATE 0.1 SEC./ MIN. 316 STAINLESS STEEL BARSTOCK BODY CONSTRUCTION.
|
|
5 VALVE MANIFOLD WITH 5 BONNETS - EACH VALVE IS 100% TESTED WITH NITROGEN AT 1000 PSI (6800 KPS.) FOR LEAKAGE AT THE SEAT AND PACKING. EACH TEST IS PERFORMED TO A MAXIMUM ALLOWABLE LEAK RATE 0.1 SEC./ MIN. 316 STAINLESS STEEL BARSTOCK BODY CONSTRUCTION.
|
|
DISTRIBUTION MANIFOLD - EACH VALVE IS 100% TESTED WITH NITROGEN AT 1000 PSI (6800 KPS.) FOR LEAKAGE AT THE SEAT AND PACKING. EACH TEST IS PERFORMED TO A MAXIMUM ALLOWABLE LEAK RATE 0.1 SEC./ MIN. NO WELDING. 100% FACTORY TESTED.
|
|
CHECK VALVES - FORWARD FLOW LIFTS THE PUPPET WHICH OPENS THE VALVE. BACK PRESSURE SEALS THE PUPPET AGAINST ORIFICE, LIMITING REVERSE FLOW TO LESS THAN 0.1 % OF FORWARD FLOW. FLOW DIRECTION ARROW IS MARKED ON VALVE BODY.
|
|
TUBE FITTINGS - THE TUBE FITTINGS ARE AVAILABLE IN TWO CATEGORIES: INSTRUMENTATION TUBE FITTING, PRECISION PIPE FITTING
|
|
GAUGE ADAPTORTS - THESE ADAPTORS ARE AVAILABLE IN TWO SERIES : GA-A & GA-B. THE GAUGE COMES IN CONNECTION SPECIFICATIONS OF 1/4 INCHES NPT, 3/8 INCHES, 1/2 INCHES.
|
|
MONOFLANGE - AN EFFECIENT TOOL FOR YOUR INDUSTRIAL REQUIREMENT.
|
|
THERMO WELLS - EACH PIECE HAS BEEN MANUFACTURED CONSIDERING THE ERGONOMIC INDUSTRIAL REQUIREMENT. UTMOST CARE HAS BEEN TAKEN TO OFFER OUR CLIENT THE UTMOST RESULTS.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
|
|
