|
|
Instrumentation & Control Equipments
|
Suppliers Directory
|
KUDALE INSTRUMENTS PVT. LTD.
| | Products : |
Dial Calibration Tester , Gear Rolling Tester , Measuring & Testing Equipments Check Master , Torque Wrench Tester Testing & Measuring Instruments |
| Address : |
PRECISION HOUSE,
98A/17, HADAPSAR INDL. ESTATE,
|
| Telephone : |
91-20-6870567/68720680 |
| Fax : |
91-20-6875383 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
EQUIPMENTS FOR QUALITY CONTROL AND TESTING - THIS SPECIAL MACHINE TO TEST WIRES, CABLES ETC. CONSISTS OF GEAR BOX OF RATIO THREEWITH SLIDING MECHANISM. STAR WHEEL IS USED TO GIVE TENSILE OR COMPRESSIVE LOAD ON SPECIMEN. ELECTRONIC SYSTEM WITH PRINTER INTERFACING ITS FACILITY THE MACHINE ALSO HAS ELECTRONIC SYSTEM PROVIDES MEANS TO ENTER DATA SUCH AS OPERATOR, BATCH, IDENTIFICATION ETC. LOAD CAN BE SET AT A PREDEFINED LIMIT. THE RSULTS ARE AVAILABLE ON DIGITAL READ OUT WHETHER THE SAMPLE IS ACCEPTED OR REJECTED ON L.E.D. PEAK LOAD AND BREAK LOAD ARE OBSERVED ON DITITAL READ OUT. AND ALSO DOT MATRIX PRINTER CAN BE INTERFACED WITH ELECTRONIC SYSTEM. THE REFERENCE PARAMETERS AND TEST RESULTS CAN BE OBTAINED ON PRINTOUT. ELECTRONIC TENSOMETER UNIVERSAL TENSILE TESTING MACHINE (BENCH MODEL) HAVING CAPACITY UP TO 20 KN,IT IS USEFUL FOR TESTING MATERIALS SUCH AS METALS, PLASTIC, TIMBER, CERAMICS, RUBBER, CEMENT, FABRIC ETC. IN TENSION COMPRESSION AND BEND AND MODEL ER-3 IS MICROPROCESSOR BASED ELECTRONIC TENSOMETER. IT IS THE UNIQUE SOLUTION FOR CHECKING THE SPECIFIC GRAVITY OF RUBBER AND RUBBER LIKE MATERIAL. SPECIFIC GRAVITY BALACE IS DIRECT READING DEVICE USED FOR CHECKING THE SPECIFIC GRAVITY FOR RUBBER AND RUBBER LIKE MATERIAL.
|
|
GEAR ROLLING TESTER - GEAR ROLLING TESTER IS GOOD FOR CHECKING TOTAL COMPOSITE ERROR, TOOTH-TO-TOOTH ERROR, PCD AND BACKLASH. THE TOOL CONSISTS OF SOLID AND ROBUST BASE, WHICH HAS ONE FLOATING SLIDE AND OTHER IS FIXED. THE FLOATING SLIDE IS MOUNTED VIRTUALLY FREE WITHOUT PLAY AND FTICTION, FLOATING ON HIGH QUALITY ACCESSORIES NEEDLE BEARINGS AND INSURES MAXIMUM ACCURACY AND REPEATABILITY. THIS SLIDE IS JOINTED TO A DIAL GAUGE, WHICH INDICATES THE VARIATION. THE GEAR MOUNTING ARBORS ARE AVAILABLE WITH THE EQUIPMENT, WHICH ARE FIXED ON FLOATING AND FIXED SLIDERS RESPECTIVELY. THE FLOATING TABLE OFFERS EXTREMELY FREE AND FINE MOVEMENT AND THUS ACCURATE TEST RESULTS ARE OBTAINED. THE SCALE IS FITTED ON THE BASE OF THE TOOL AND VERNIER SCALE IS ATTACHED ON THE FLOATING SLIDE. THE HIGH CENTRE COLUMN IS PROVIDES FOR CHECKING SHAFT GEARS. THE SPUR GEARS RANGING FRIM DIA 40 TO 350 MM AND SHAFT GEARS UP TO 750 MM LENGTH CAN BE CHECKED. THE BEVEL AND WORM GEAR ATTACHMENT IS AVAILABLE AS AN OPTIONAL EQUIPMENT.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
