|
|
Instrumentation & Control Equipments
|
Suppliers Directory
|
ELECTRONIC AUTOMATION PVT. LTD
| | Address : |
#20,KHB INDL. AREA,YELAHANKA |
| Telephone : |
080- 8462562 |
| Fax : |
080 8460129 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
TACHOMETER, PORTABLE NON-CONTACT TYPE - DT-2001 - ELECTRONIC AUTOMATION PVT LTD IS A MANUFACTURER OF ELECTRONIC DEVICES. MODEL DT-2001 B IS NON-CONTACT TACHOMETER OF EXPORT QUALITY AND IS AVAILABLE IN A RANGE FROM 1 TO 99,999 RPM AND OPERATES BY NON-CONTACT SENSING THROUGH REFLECTED LIGHT BEAMS. ITS OTHER FEATURES INCLUDE MEMORY FACILITY, HIGH ACCURACY, AND LED INDICATION FOR SIGNAL, SENSING. THIS TACHOMETER WITH SLEEK CONSTRUCTION OPERATES ON A 6 V BATTERY, AND IS LIGHT-WEIGHT AND PORTABLE.
|
|
FIVE-DIGIT PRESET PRODUCTION COUNTERS - CT - BANGALORE-BASED ELECTRONIC AUTOMATION (P) LTD MANUFACTURES FIVE-DIGIT PRESET PRODUCTION COUNTERS - CT-5 WITH MEMORY FACILITY AND COUNTS RANGING FROM 0 TO 99,999 COUNTS WITH AN INSULATION RESISTANCE GREATER THAN 100 M OHMS AT 500 V DC. THESE OPERATE ON 240 V AC AND HAVE LED INDICATION FOR INPUT SIGNAL AND RELAY STATUS. THE SINGLE CHANGE OVER RELAY OUTPUT IS RATED FOR 5 AMPS AT 250 V AC / 24 V DC RESISTIVE LOAD +/- 10 PERCENT FOR BOTH V AND I. INPUT SIGNAL IS FROM PROXIMITY SWITCH OR LIMIT SWITCH AND THE MAXIMUM COUNTING SPEED IS UP TO 100 HZ. THESE HAVE EXTERNAL RESET CONTACTS AND PANEL MOUNTING ARRANGEMENT AND THE OPERATING VOLTAGE RANGE IS -15 TO + 0 PERCENT OF RATED VOLTAGE. DISPLAY IS BY MEANS OF 5 DIGIT 7 SEGMENT LED 8 MM HIGH DISPLAY UNIT WITH DIMENSIONS 72 MM X 72 MM X 128.5 MM WEIGH APPROXIMATELY 500 GMS. APPLICATION AREAS OF THESE COUNTERS INCLUDE PACKAGING MACHINES, PRINTING MACHINES, TEXTILE MACHINERY AND MACHINE TOOLS. SOME OF THE SPECIFICATIONS ARE AS FOLLOWS:* RESETTING TIME: 100 MSECS (MINIMUM)* RECOVERY TIME: 100 MSECS (MINIMUM)* OPERATING TEMPERATURE: -10 TO +55 DEG C* STORAGE TEMPERATURE: -25 TO + 80 DEG C* HUMIDITY: 45 TO 85 PERCENT RH* SERVICE LIFE: 10^6 OPERATION MINIMUM UNDER NO LOAD* ELECTRICAL LIFE: 10^5 OPERATION MINIMUM WITH FULL LOAD* CONNECTIONS: SCREW TYPE TERMINALS WITH SELF-LIFTING CLAMPS* WIRE SIZE: 2.5 MM^2 MAXIMUM
|
|
TEMPERATURE CONTROLLER, DIGITAL - MODEL TX7-PI - ELECTRONIC AUTOMATION PVT LTD (EAPL), IS A LEADING MANUFACTURER OF ELECTRONIC DEVICES AND HAS INTRODUCED MODEL TX7-PI-K IS A DIGITAL TEMPERATURE CONTROLLER, WHICH IS AN ON-OFF AND PI CONTROL SELECTABLE. THE MEASURING RANGE IS 0-1,2WC WITH A K-TYPE THERMOCOUPLE AND OPERATES ON 110 V AC TO 240 V AC SOURCE. THE 2 C/O RELAY OUTPUT IS RATED FOR 5 A AT 250 V AC/28 V DC RESISTIVE LOAD AND COMES WITH AN LED INDICATION FOR RELAY STATUS. SENSOR REVERSE AND SENSOR OPEN INDICATION IS THROUGH DISPLAY. THUMB WHEEL SWITCHES FOR TEMPERATURE SETTING, AND AUTOMATIC COLD JUNCTION COMPENSATION FOR THERMOCOUPLE INPUT ARE PROVIDED.
|
|
ANALOGUE TEMPERATURE CONTROLLER - TX7- - EAPL OFFERS ANALOGUE TEMPERATURE CONTROLLER-MODEL TX7-A WITH A KNOB SETTING FACILITY AND HAS A TEMPERATURE RANGE OF 0-400ēC; WITH ON/OFF CONTROL, AN AUTOMATIC COLD JUNCTION COMPENSATION FOR THERMOCOUPLE INPUT AND PROVISION IS ALSO THERE FOR K TYPE/J TYPE SENSOR INPUT. EAPL ALSO OFFERS PID CONTROLLERS AND DIGITAL TEMPERATURE INDICATORS AND CONTROLLERS AND OPERATES ON 240 V AC VOLTAGE AND POWER CONSUMPTION IS 2 VA/1 W.
|
|
PHASE MONIORING DEVICE - EAPL INTRODUCED A PHASE MONITORING DEVICE WHO MONITORS PHASE SEQUENCE, PHASE FAILURE, PHASE UN-BALANCE AND UNDER VOLTAGE IN 3-PHASE SYSTEMS AND TRIPS UNDER SUCH CONDITION. IT HAS TWO MODES OF EXECUTION - AUTO AND MANUAL. IT IS PROVIDED WITH LED INDICATION FOR POWER ON, RELAY ON AND FAULT STATUS WITH EXTERNAL CONTACTS FOR RESTART. IT IS APPLICABLE FOR DIN RAIL MOUNTING. THE OUTPUT IS A 1 C/O RELAY. ITS SOURCE VOLTAGE IS 440 V AC (3-PHASE). APPLICATION: DISTRIBUTION BOARDS; GENSETS/AMF PANELS; POWER CONTROL CENTERS; PUMP CONTROL PANELS; AND OTHER APPLICATIONS.
|
| |
|
View More Supplier Pages
Page(s) : 1
2
3
4
5
| |
|
|
|
