|
|
Instrumentation & Control Equipments
|
Suppliers Directory
|
MICRONIX ASSOCIATES
| | Address : |
PB NO 726, W 10, M I D C AREA, CHIKALTHANA |
| Telephone : |
0240 2484159, 2483004 |
| Fax : |
91 240 2484246 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
ANGLE SLIP GAUGES - YET ANOTHER OFFERING FROM MIKRONIX MANUFACTURERS IS ANGLE SLIP GAUGES .IT’S BASICALLY
MEANT FOR THE INSPECTION AND CALIBRATION OF ANGLES, TAPERS, INDEXING PLATE, ROTARY SCALES, CLINOMETERS, DIVIDING HEADS, ROTARY TABLES, ETC. MADE FROM HIGH CHROMIUM STEEL ANGELS GAUGE BLOCKS HAVE THE PROPERTIES OF AGING STABILITY IN DIMENSIONS AND WEAR RESISTANCE.
THE WORKING SURFACES ARE HARDENED TO 800HV.ANGLE GAUGE BLOCKS ARE ALSO AVAILABLE IN TUNGSTEN CARBIDE. THIS ANGLE GAUGE TOGETHER WITH THE SQUARE BLOCK IS USED TO OBTAIN ANY ANGLE BETWEEN 0 AND 360 DEGREES IN STEPS OF 6 SECONDS. SPECIAL CHARACTERISTICS INCLUDE ACCURATE MEASUREMENT OF ANY ANGLE, NO CUMULATIVE ERRORS OF DIVISION, WRINGING PROPERTY SIMILAR TO SLIP GAUGES, HIGH DEGREE OF REFLECTIVITY WHICH ENABLES THEM TO BE USED WITH AN AUTOCOLLIMATOR.
|
|
CERAMIC SLIP GAUGES - SPECIALLY SELECTED FROM ZIRCONIA CERAMIC FROM U.K, MIKRONIX ASSOCIATES MANUFACTURE CERAMIC SLIP GAUGES. CERAMIC SLIP GAUGES HAVE UNVARIED AND CLOSE GRAIN STRUCTURE THAT SET UP THE BLOCKS TO BE IMMOVABLY WRUNG TOGETHER AND EASY TO WORK. DENTS AND BURRS ARE NOT EASILY PRODUCED ON GAUGE SURFACE. ZIRCONIA CERAMIC BLOCKS ARE HARD AND HIGHLY TOUGH TO WITHSTAND THE KNOCKS AND DROPS THAT OCCUR DURING USE AND WILL NOT CHIP OR FRACTURE EASILY. THE NATURAL STABILITY AND DURABILITY DUE TO ITS LOW FRICTION CO-EFFICIENT MAINTAINS THEIR GEOMETRY LONGER. THEY ARE AVAILABLE IN SETS IN DIFFERENT GRADES. CO-EFFICIENT OF THERMAL EXPANSION OF CERAMIC IS 10 X 10-6 / °C IS VERY CLOSE TO THAT OF STEEL BY 1.5 X 10-6 /°C. THE LOWEST THERMAL CONDUCTIVITY MAKES THESE GAUGE BLOCKS EASY TO USE AT DIFFERENT TEMPERATURES. FEATURES: -CORROSION RESISTANT – NO AFFECTED BY WATER, ACIDS AND ALKALIS -SIMPLE MAINTENANCE WITH NO NEED OF ANY ANTI-CORROSION TREATMENT -NO ADVERSE EFFECTS DUE TO FINGER IMPRESSION WHILE USING
|
|
SLIP GAUGE CALIBRATOR - MIKRONIX, THE AURANGABAD BASED COMPANY INTRODUCES YET ANOTHER PRODUCT OF THEIRS. IT’S CNC AUTOMATIC SLIP GAUGE CALIBRATOR. IT SERVES FOR THE CALIBRATION OF SLIP GAUGES FROM 0.5 TO 100-MM LENGTH. THE SLIP GAUGE TO BE MEASURED IS COLLATED WITH REFERENCE MASTER WHOSE DEVIATION AT CENTER IS EXACTLY KNOWN. WITH 2 MEASURING PROBES, ONE AT THE TOP AND THE OTHER AT THE BASE, THE DIFFERENTIAL MEASUREMENT CONFERS RELIABLE MEASUREMENT WITH EXTREMELY HIGH ACCURACY. A TEMPLATE PROFILE ALLOWS THE PROBES TO TRACE 5 POINTS ON THE SURFACE OF THE SLIP GAUGE UNDER TEST AND ONE AT THE CENTER POINT OF THE REFERENCE MASTER. THE MANUAL REMOTE CONTROL ALLOWS THE MOVEMENT OF THE SLIP GAUGE SMOOTHLY WITHOUT JERK AND INTERFERENCE FROM BODY HEAT. TECHNICAL SPECIFICATIONS: MEASURING RANGE: 0.5 TO 175 MM FUNCTIONAL TABLE AREA: 62X62 MM MEASURING INCONSISTENCY: ±0.02 MM MOUNTING OF BORE: Æ8MM WEIGHT: 38 KG FEATURES: -THE CALIBRATION CONFORMS TO THE REQUIREMENT OF NATIONAL AND INTERNATIONAL STANDARDS, IS-2984 OF 1981 AND DIN-861 OF 1988. -CENTER DEVIATION -PARALLELISM BY 5 POINTS MEASUREMENT AND HENCE SELECTION OF THE GRADE.
|
|
DEPTH MICROMETER CHECKER - MICRONIX ASSOCIATES PRESENTS YET ANOTHER INNOVATIVE PRODUCT, ‘MICRONIX DEPTH MICROMETER CHECKER. IT’S DESIGNED SPECIALLY FOR THE CALIBRATION OF DEPTH MICROMETER. GAUGE BLOCKS ARE BUILT-IN THE RIGID FRAME TO SUPPLY MEASURING IN 25 MM OR 1"STEPS IN ACCORDANCE WITH THE TRAVEL RANGE OF MICROMETER HEAD. AN ANVIL OF 25 MM OR 1"IS CATERED TO PROVIDE A REFERENCE POINT FOR CALIBRATION AT PREFERRED STEP WITHIN THE MEASURING RANGE OF THE CHECKER. THE INSTRUMENT IS AN IDEAL MASTER GAUGE FOR CALIBRATION OF DEPTH MICROMETERS THAT MUST BE SET ZERO BEFORE PRECISE MEASUREMENTS ARE TAKEN. THERE ARE SIX MODELS WHOSE BLOCKS ARE MADE OF STEEL AND CARBIDE. THE MEASUREMENT RANGE IS FROM 0-150MM TO 0-6". THE ANVIL BLOCK RANGES FROM 25MM TO 1''.OVERALL ACCURACY RANGES FROM -/+2 UM TO -/+120 UM.
|
|
DEPTH MICROMETER CHECKER - THE LATEST INNOVATION FROM MICRONIX ASSOCIATES IS A DEPTH MICROMETER CHECKER. IT IS DESIGNED FOR THE CALIBRATION OF DEPTH MICROMETER. GAUGE BLOCKS ARE BUILT-IN THE RIGID FRAME TO CONTRIBUTE MEASURING IN 25 MM OR 1 STEPS IN TANDEM WITH THE TRAVEL RANGE OF MICROMETER HEAD. AN ANVIL OF 25 MM OR 1 IS OFFERED TO PROVIDE A REFERENCE POINT FOR CALIBRATION AT DESIRED STEP WITHIN THE CHECKER’S MEASURING RANGE. THE INSTRUMENT IS AN IDEAL MASTER GAUGE FOR CALIBRATION OF DEPTH MICROMETERS THAT MUST BE SET ZERO BEFORE ACCURATE MEASUREMENTS ARE TAKEN. WITH BLOCKS MADE OF STEEL AND CARBIDE THERE ARE SIX MODELS. THE MEASUREMENT RANGE IS FROM 0-150 MM TO 0-6. THE ANVIL BLOCK RANGES FROM 25 MM TO 1. OVERALL ACCURACY RANGES FROM ±2 µM TO ±120 µM.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
