|
|
Instrumentation & Control Equipments
|
Suppliers Directory
|
ODIN INDIA PVT LTD
Manufacturer & Exporters Of Analyzer And Testers, Gauges And Indicators.
| | Address : |
17 III MAIN ROAD, KASTURBA NAGAR, ADYAR |
| Telephone : |
044 24412473,24412537 |
| Fax : |
91 44 24910714 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
CALIBRATOR WITH DATALOGG - IN COLLABORATION WITH AMETEK INC, UNITED STATES, ODIN INDIAN PVT LTD PRESENTS A TRACTABLE, MICROPROCESSOR CONTROLLED CALIBRATOR WITH DATALOGGER, MODCAL II. THIS IS DESIGNED IDEALLY FOR ISO 9000 ASPIRANTS. IT IS A COMPREHENSIVE SYSTEM FOR CALIBRATING AND DATALOGGING ALL PROCESS INSTRUMENTS INCLUDING PRESSURE, FREQUENCY, TEMPERATURE, AND OTHER MEASUREMENTS. ITS FLEXIBLE MODULAR DESIGN ALLOWS USERS TO SELECT DESIRED CALIBRATION FEATURES FROM TEMPERATURE SIMULATION AND MEASUREMENT, PRESSURE VACUUM TO 700 BARS, PRESSURE SOURCE AND REGULATION. MODCAL II IS ACCURATE TO +0.05% OF READING, TRACEABLE _ TO NIST, U.S.A., AND INCLUDES LINEARITY, HYSTERESIS AND REPEAT- ABILITY. ITS STANDARD MEMORY CLASPS CUSTOMIZED CALIBRATION PRO- GRAMS FOR OVER 200 TYPES OF INSTRUMENTS, WHICH MAY BE DISMISSED AT ANY TIME TO PROVIDE QUICK AND EFFICIENT CALIBRATION PROCEDURES. THIS UNIQUE DATALOGGER ALLOWS STORAGE OF OVER 2000 INSTRUMENTS RECORDS THAT CAN BE TRANSFERRED TO USERS RECORD KEEPING BY USING IBM COMPATIBLE MODCAL II MC LINK SOFTWARE AND RS-232C SERIAL PORT. THE TOTAL SYSTEM HELPS PROVIDE OBJECTIVE EVIDENCE OF IN- STRUMENT MAINTENANCE AS REQUIRED BY ISO 9000, FDA AGENCIES.
|
|
VACUUM TESTER, HAND HELD - T-6 - T-600 PRESSURE TESTERS MANUFACTURED WITH TECHNICAL SUPPORT FROM AMETEK MANSFIELD & GREEN DIVISION OF AMETEK, UNITED STATES IS THE LATEST ATTRACTION FROM ODIN INDIA PVT LTD. A CHOICE OF PNEUMATIC, HYDRAULIC AND VACUUM TESTERS HELP FIELD PRESSURE TESTING CAPABILITY FROM 0-760 MMHG VACUUM TO 200 KG/CM2. THESE TESTERS ARE LIGHTWEIGHT, HAND HELD DEVICES PROVIDING QUICK, CONVENIENT PRESSURE SOURCES FOR CALIBRATION OF INSTRUMENTS LIKE PRESSURE TRANSMITTERS, GAUGES, TRANSDUCERS AND 3-15 PSIG INSTRUMENTATION. EACH TESTER IS PROVIDED WITH A UNIQUE PISTOL GRIP HANDLE FOR QUICK, EASY PUMP ACTION AND CONDUCIVE TEST STAND MOUNTING. MODEL T-680 VACUUM TESTER IS WIDELY USED FOR TESTING AND CALIBRATION OF INSTRUMENTS IN RANGES UP TO 625 MMHG VACUUM. THE TESTER IS ALSO EQUIPPED WITH A NEEDLE VALVE FOR POSITIVE SHUT-OFF AND A VERNIER FOR FINE ADJUSTMENT. A CHOICE OF +5% ACCURACY 3 INCH TEST GAUGE IS OFFERED, WHICH CAN BE MOUNTED ON THE BODY WITH A QUICK DISCONNECT, SWIVEL FITTING FOR EASY VIEWING. THIS TESTER COMES COMPLETE WITH A 24 INCH LONG CONNECTION HOSE. TO MAKE THE T-680 TESTER EVEN MORE CONVENIENT TO USE, THE COMPANY OFFERS AN OPTIONAL RUGGED, HIGH IMPACT INSTRUMENT CASE WITH INSERT TO HOLD TESTER AND TWO SPARE GAUGES.
|
|
PORTABLE DEAD WEIGHT TESTER - ODIN, IN COLLABORATION WITH AMETEK INC, U.S.A., PRESENTS MOVABLE LOW COST DEAD WEIGHT TESTER THAT CONGLOMERATES RUGGEDNESS, ACCURACY AND PORTABILITY. THE TESTER IS SUPPLIED WITH AN ACCURACY CERTIFICATE TRACEABLE DIRECTLY TO NIST, U.S.A., MAKING IT PERFECT FOR ISO 9000 ASPIRANTS. IT IS COMPACT, COMPLETELY SELF-CONTAINED WITH THE COMPLETE TESTER INCLUDING WEIGHTS, CONTAINED IN AN ATTRACTIVE BLACK ANODIZED ALUMINIUM CASE. OTHER SPECIAL CHARECTORISTICS INCLUDE: RE-ENTRANT TYPE MEASURING PISTON AND CYLINDER ASSEMBLY MAINTAINING ACCURACY AS TEST PRESSURES INCREASE; RAPID INTERCHANGEABILITY OF HIGH AND LOW PRESSURE PISTON; SPECIAL WEIGHT CARRIER WITH SUSPENDED WEIGHTS LOWERING THE CENTRE OF GRAVITY AND REDUCING SIDE THRUST ON THE MEASURING PISTON; INTERCHANGEABLE WEIGHTS WITH REPLACEMENT OF DAMAGED OR LOST WEIGHTS BEING SIMPLE AND ECONOMICAL; INTEGRATED SCREW PUMP WITH RESERVOIR OFFERING FAST PRIMING AS WELL AS POSITIVE ADJUSTMENT; LONG FLOATING TIME REDUCING RE-ADJUSTMENT DURING TESTS; AND, TRANSPARENT OIL RESERVOIR PERMITING VISIBLE TEST OIL FOR FINDING OUT CONTAMINATION.
|
|
PRESSURE GAUGE - SERIES 19 - ODIN INDIA PRESENTS A COMPLETE RANGE OF PRESSURE GAUGES FROM 30" HG TO 1,000 KG/CM_Ý", WITH TECHNICAL KNOW-HOW FROM AMETEK US, GAUGE DIVISION. THE ODIN 1900 SERIES GAUGES,INCLUDE AN ACCURACY OF _Ñ"0.5%. THE DESIGN AND MATERIALS OF CONSTRUCTION ARE GEARED TO PROVIDE RELIABLE SERVICE IN A VARIETY OF APPLICATIONS. MADE OF CAST ALUMINIUM WITH AN INTEGRAL WALL BETWEEN THE MEASURING ELEMENT AND THE WINDOW THE SOLFRUNT GAUGE CASE IS. DESIGNED FOR OPTIMUM SAFETY THE GAUGE IS IN ALL STAINLESS STEEL PRESSURE RELEIVING BACK.TO SUIT A VARIETY OF APPLICATIONS DIFFERENT BOURDON MATERIALS LIKE PHOSPHOR BRONZE, SS 316, SS 403 AND MONEL ARE AVAILABLE. THE MOVEMENT FEATURES GEARED ARC-LOC WITH COMPONENTS OF CORROSION RESISTANT 300 SERIES STAINLESS STEEL BUSHINGS AND CAN BE REMOVED FOR EXAMINATION AND CLEANING WITHOUT DISTURBING SPAN AND SCALE SHAPE ADJUSTMENTS. ZERO ADJUSTMENT IS PROVIDED AS A STANDARD IN THE MICROMETER POINTER. A `ZERO BAND' SCALE MARKING THAT IS EQUAL IN WIDTH TO THE EXTREMES OF THE GUARANTEED ACCURACY OF THE GAUGE IS PROVIDED FOR EASY CHECKING AND CALIBRATION OF ZERO. STANDARD FEATURES ALSO INCLUDE AN INTEGRAL MINIMUM STOP TO PROTECT THE BOURDON. THE LIQUID FILLING CAPABILITY SUPPLIED EXTEND THE SERVICE LIFE OF GAUGE WHEREVER CORROSIVE ATMOSPHERE AND/OR SEVERE OPERATING CONDITION PREVAILS. THE LIQUID EFFECTIVELY DAMPENS PULSATION AND VIBRATION WHILE PROVIDING CONTINUOUS LUBRICATION AND PROTECTION FROM CORROSION FOR THE GAUGE INTERNALS. SPECIALLY DESIGNED STAINLESS STEEL REAR BLOW OUT PANEL AND ATMOSPHERE PRESSURE AND TEMPERATURE COMPENSATION VENT ARE STANDARD FEATURES.
|
|
DIAPHRAGM SEAL PRESSURE GAUGE - ODIN AN IS0 9002 COMPANY, IN ASSOCIATION WITH AMETEK, USA, (MANSFIELD AND GREENS DIVISION) PRESENTS DIAPHRAGM SEAL PRESSURE GAUGES. THESE DIAPHRAGM SEALS ARE PROTECTIVE DEVICES DESIGNED TO SEPARATE PRESSURE GAUGES, PNEUMATIC TRANSMITTERS AND OTHER INSTRUMENTS FROM POTENTIALLY DAMAGING PROCESS MEDIA. THE DIAPHRAGM SEAL TYPICALLY COMPRISES OF A METAL. TEFLON OR ELASTOMER DIAPHRAGM MOUNTED BETWEEN TWO FLANGES AND SEALED TO PREVENT LEAKAGE OF PROCESS GASES OR FLUIDS. THE SPACE ON THE INSTRUMENT SIDE OF THE DIAPHRAGM, THE CONNECTIONS AND THE INSTRUMENT SENSING ELEMENT ARE ALL FULLY FILLED WITH INSTRUMENT OIL, SILICON OR OTHER SUITABLE FLUID. WHEN PROCESS LINE PRESSURE IS APPLIED, THE DIAPHRAGM EXERTS EQUAL PRESSURE ON THE INSTRUMENT SIDE OF THE SEAL PRODUCING A READING ON THE GAUGE OR OTHER INSTRUMENT. THE INSTRUMENT MAY BE ATTACHED DIRECTLY TO THE DIAPHRAGM SEAL OR CONNECTED REMOTELY BY MEANS OF A FILLED LENGTH OF CAPILLARY TUBING. DIAPHRAGM SEALS CAN BE USED WITH PRESSURE OR VACUUM INSTRUMENTS INCORPORATING C-TYPE, HELICAL OR SPIRAL BOURDON TUBES, BELLOWS, DIAPHRAGM, OR ELECTRONIC STRAIN GAUGE SENSING ELEMENTS.
|
|
LIQUID FILL GAUGES - ODIN INDIA PRESENTS SOLFRUNT LIQUID FILLED GAUGES. THESE ARE SPECIFICALLY DESIGNED FOR THE EXIGENT NEEDS OF THE PROCESS INDUSTRIES. THESE IMPERVIOUS INSTRUMENTS FEATURE A SOLID WALL BETWEEN THE DIAL AND ALSO INCORPORATE A PRESSURE RELIEVING BACK. A PRECISION-GEARED ARC-LOC MOVEMENT IS USED FOR GOTTEN BETTER PERFORMANCE. TWO METHODS TO COMPENSATE FOR PRESSURE AND TEMPERATURE VARIATIONS ARE OFFERED: A SEALED CASE WITH A BUILT-IN ELASTOMERIC DIAPHRAGM OR A CASE WITH A PRESSURE EQUALIZING VENT. THESE GAUGES ARE AVAILABLE IN A PET 1 TURRET, OR AN ALUMINIUM BACK FLANGED CASE. STEM OR WALL MOUNTED BOTH CAN BE . THESE INSTRUMENTS ARE AVAILABLE IN 30 DIFFERENT PRESSURE RANGES INCLUDING VACUUM, AND COMPOUND RANGES, AND HAVE AN ACCURACY OF ±0.5% FS. LIQUID FILLED GAUGES ARE AVAILABLE IN THREE OPTIONAL CONFIGURATIONS: LIQUID FILLED AT FACTORY; DRY WITH LIQUID FILL KIT SOLD SEPARATELY, AND NEW E-Z FILL DESIGN TO EXPEDITE FILLING IN THE FIELD WITHOUT SPECIAL TOOLS OR FIXTURES. STANDARD LIQUID FILL IS GLYCERINE, BUT THE GASKET COMPOSITION OF ALL SEALS ALLOWS USE OF SILICONE OIL AS WELL.
|
|
MODULAR CALIBRATION SYSTEMS - ODIN INDIA PVT LTD PRESENTS MODULAR CALIBRATION SYSTEMS FOR PRECISION INSTRUMENTS, IN COLLABORATION WITH AMETEK OF USA. THESE CALIBRATION SYSTEMS (ALSO KNOWN AS MODCAL II), COMPRISE OF EIGHT SEPARATE FUNCTION MODULES CAPABLE OF PERFORMING A VARIETY OF TESTS ON A WIDE RANGE OF INSTRUMENTATION, INCLUDING PNEUMATIC AND ELECTONIC TRANSMITTERS, TRANSDUCERS, CONTROLLERS, RECORDERS, P/I AND I/P CONVERTERS, ORIFICE METERS AND OTHER DIFFERENTIAL PRESSURE DEVICES. AS PER THE NEEDS OF THE USER, ADDITIONAL MODULES CAN BE INCORPORATED INTO THE CALIBRATORS WITHOUT HAVING TO PURCHSE A COMPLETE NEW UNIT. DESIGNED FOR FAST, CONVENIENT AND ACCURATE FIELD TESTING, THE MODULAR CALIBRATION SYSTEMS ARE PACKED IN A RUGGED LIGHTWEIGHT, WEATHER-RESISTANT HOUSING WHICH INCORPORATED POWER SUPPLY, PRESSURE SOURCE, TUBING & CONNECTORS, INSTRUMENT MANUAL AND STRAP. THE MODCAL MODULAR CALIBRATION SYSTEMS ARE ALSO IDEAL FOR LABORATORY BENCH USE AND ARE AVAILABLE IN PANEL MOUNT VERSION FOR PERMANENT INSTALLATION.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
