|
|
Instrumentation & Control Equipments
|
Suppliers Directory
|
ELTEK SYSTEMS
Consulting Engineers, Weighing Systems, Process Control & Ergonomics
| | Address : |
308,GOYAL TRADE CENTRE, SONA TALKIES COMPLEX, SHANTIVAN, BORIVALI (E),
|
| Telephone : |
022-289657629820152092 |
| Fax : |
91-22-28965763 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
LOADCELLS FOR OEMS - THESE LOADCELLS AND MOUNTING ACCESSOIES ARE MAINLY DESIGNED FOR WEIGHING SCLAES AND WEIGHING SYSTEM MANUFACTURES. AVAILABLE RANGE IS FROM 3 KG TO 100 TONNES CAPACITY. THESE LOADCELLS COMES WITH 3 YEARS WARRANTY. THE RANGE INCLUDES: SINGLE POINT, SHEARE BEAM, BEANDING BEAM, ETC.
|
|
S TYPE LOAD CELLS - THESE LOAD CELLS ARE AVAILABLE FROM 5 KGS TO 100 TONS CAPACITY. THE PRODUCT RANGE ALSO INCLUDES SPECIALLY DESIGNED COMPRESSION LOAD CELLS FOR ELECTRONIC WEIGHBRIDGES WHICH ARE MAINLY DESIGNED FOR WEIGHING SCALES AND WEIGHING SYSTEM MANUFACTURERS.
|
|
TORQUE SENSORS - ARE AVAILABLE IN THE RANGE OF 0.1 NM TO 50,000 NM. THE RANGE INCLUDES STATIC TORQUE TRANSDUCERS, REACTION TORQUE SENSORS, SLIPRING TYPE TORQUE SENSORS AND SENSORS WITH NON CONTACT SIGNAL TRANSMISSION. SOME MODELS ARE AVAILABLE WITH BUILT IN SPEED SENSORS AMPLIFIER (5 V OUTPUT), PC INTERFACE ALSO. ITS MAIN APPLICATION AREAS ARE AUTOMOBILE TESTINGS (TRANSMISSION TEST, ENGINE DYNAMOMETER, CHASIS DYNAMOMETER, GEARBOX EFFICIENCY TESTS, STEERING TORQUE MEASUREMENT, ETC)
|
|
VIBRATION CALIBRATOR - ELTEK SYSTEMS OFFERS VIBRATION CALIBRATOR (MODEL- CE 7144) OF IMV CORPORATION, JAPANM, SUITABLE FOR CALIBRATING VIBRATION PICKUP OF FREQUENCY RANGING FROM 5 HZ TO 10 KHZ AND CAN BE USED AS VIBRATION TEST SYSTEM ALSO. THIS MODEL CE 7144 INCORPORATES ELECTRO-DYNAMIC VIBRATION SHAKER, TEST ACCELEROMETER, CALIBRATION AMPLIFIER AND MICROSCOPE.
|
|
TORQUE TRANSDUCER - ELTEK SYSTEMS OFFERS COMPLETE RANGE OF TORQUE TRANSDUCERS FROM HIGHLY REPUTED ISO COMPANY - LORENZ - GERMANY. IT IS AVAILABLE IN THE RANGE FROM 0.1 NM TO 50,000 NM AND THE PRODUCT RANGE INCLUDES - STATIC TORQUE TRANSDUCER, REACTION TORQUE SENSOR, SLIP RING TYPE TORQUE SENSOR, SENSOR WITH NON-CONTACT SIGNAL TRANSMISSION, WHILE A FEW MODELS ARE AVAILABLE WITH BUILT IN SPEED SENSORS AND AMPLIFIER ALSO, ALONG WITH SUITABLE MOUNTING ACCESSORIES AND SIGNAL CONDITIONERS. MAIN APPLICATION AREAS ARE AUTOMOBILE TESTING (TRANSMISSION TEST, ENGINE DYNAMOMETER, CHASSIS DYNAMOMETER, GEAR BOX EFFICIENCY TESTS, STEERING TORQUE MEASUREMENT, ETC), MOTORS AND PUMP TEST SET UPS, VISCOSITY MEASUREMENT, BEARING FRICTION CHECK, ETC.
|
|
ACCELEROMETER - ELTEK SYSTEMS OFFERS 1 MV - JAPAN MAKE PIEZOELECTRIC AND PIEZO RESISTIVE TYPE ACCELEROMETER FOR VIBRATION MEASUREMENTS. PIEZOELECTRIC ACCELEROMETERS ARE AVAILABLE FOR FREQUENCY RANGE UP TO 10 KHZ AND OFFERS MODELS WITH BUILT-IN CHARGE AMPLIFIERS TO GIVE ANALOGUE OUTPUT. LIGHTWEIGHT ACCELEROMETERS (0.9 GM AND 1.2 GM) ARE ALSO AVAILABLE FOR MODEL ANALYSIS AND ON BOARD APPLICATIONS IN AUTOMOBILE/AEROSPACE. PIEZORESISTIVE ACCELEROMETER (WEIGHING ONLY 8 GM) IS AVAILABLE FOR STATIC TO 1 KHZ MEASURING RANGE AND IS HIGHLY SUITABLE FOR MACHINE VIBRATION AND STRUCTURAL APPLICATIONS. THE COMPANY ALSO OFFERS DIFFERENT TYPES OF MOUNTING ACCESSORIES AND AMPLIFIERS.
|
|
MULTI COMPONENT LOADCELLS & MACHINE FORCE DYNAMOMETER - ELTEK SYSTEMS OFFERS MULTI COMPONENT FORCE SENSORS AND MACHINE FORCE DYNAMOMETERS FROM AMTI - USA. THIS FORCE SENSORS MEASURE SIX COMPONENTS - 3 FORCES AND 3 MOMENTS WITH FEATURES LIKE HIGH STIFFNESS, HIGH SENSITIVITY, LONG-TERM STABILITY AND REPEATABILITY. THE SENSOR HAS VERY LESS CROSS TALK BETWEEN EACH CHANNEL AND IS COMMONLY USED FOR R&D IN MACHINING AND PRODUCTION PROCESS, ROBOTICS, OCEAN ENGINEERING, AEROSPACE RESEARCH AND THRUST FORCE MEASUREMENT IN WIND TUNNEL. SPECIFIC MODELS ARE AVAILABLE FOR FORCE MEASUREMENTS DURING GRINDING AND LATHE OPERATIONS AND HAS SPECIALLY DESIGNED SENSORS FOR UNDER WATER APPLICATIONS, BOLT FORCE, TORQUE, TENSION MEASUREMENT, AND GROUND REACTION FORCE MEASURING TRANSDUCERS FOR WHEELS, ETC.
|
|
PORTABLE VIBRATION METER - ELTEK SYSTEMS OFFERS PORTABLE VIBRATION METERS IN TREND VIBRO PORTA VIBRO MODELS MANUFACTURED BY IMV CORPORATION, JAPAN, IDEAL FOR MONITORING AND MEASURING VIBRATIONS CAUSED BY MACHINES SUCH AS TURBINES, BLOWERS, COMPRESSORS, PUMPS, MOTORS AND ENGINES. TREND VIBRO IS A COMPACT AND LIGHTWEIGHT INSTRUMENT WITH IN-BUILT DIGITAL SIGNAL PROCESSOR AND DATA STORAGE CAPACITY AND HELPS IN MAINTAINING THE MACHINES IN GOOD CONDITION WITH ADVANCED FEATURES AND ANALYSIS SOFTWARE. PORTA VIBRO IS A HANDY INSTRUMENT WITH PICKUP FEATURE TO MEASURE THE RANGES OF ACCELERATION, DISPLACEMENT AND VELOCITY. IT COMPLIES WITH ISO 2954 STANDARDS.
|
|
TORQUE TRANSDUCER - ELTEK SYSTEMS OFFERS A COMPLETE RANGE OF TORQUE TRANSDUCERS FROM LORENZ, GERMANY, THAT MEET INTERNATIONAL STANDARDS AND ARE AVAILABLE IN THE RANGE FROM 0.1-50,000 NM. ITS PRODUCT RANGE INCLUDES: STATIC TORQUE TRANSDUCER, REACTION TORQUE SENSOR, SLIP-RING TYPE TORQUE SENSOR AND SENSORS WITH NON-CONTACT SIGNAL TRANSMISSION. SOME OF THE MODELS ARE AVAILABLE WITH BUILT-IN SPEED SENSORS AND AMPLIFIER ALSO WITH SUITABLE MOUNTING ACCESSORIES AND SIGNAL CONDITIONERS ARE OFFERED. MAIN APPLICATION AREAS INCLUDE AUTOMOBILE TESTING (TRANSMISSION TEST, ENGINE DYNAMOMETER, CHASSIS DYNAMOMETER, GEARBOX EFFICIENCY TESTS AND STEERING TORQUE MEASUREMENT), MOTORS AND PUMP TEST SET UPS, VISCOSITY MEASUREMENT AND BEARING FRICTION CHECK.
|
|
FATIGUE RATED LOADCELL - PRESENTED BY ELTEK SYSTEMS FATIGUE RATED LOAD CELLS MANUFACTURED BY LEBOW - UNITED STATES ITS FATIGUE LIFE IS APPROXIMATELY 100 MILLION CYCLES AND AVAILABLE IN COMPLETE RANGE FROM 1 KN TO 10 MN FORCE. IT IS VERY EASY IN MOUNTING DUE TO THROUGH TAPPED HOLE IN CENTRE AND OFFERED WITH TENSION BASE ALSO. ITS AREAS OF APPLICATION ARE MAINLY IN PRESS FORCE MONITORING, UNIVERSAL AND TENSILE TESTING MACHINES AND ENGINE DYNAMOMETERS. IT IS ALSO USEFUL FOR VARIETY OF CYCLIC LOAD MEASUREMENT IN SPACE RESEARCH, MATERIAL TESTING LABS, DEFENCE LABS, AUTOMOBILE RELATED R & D AND TEST SYSTEM MANUFACTURERS, ETC.
|
|
LOADCELLS/FORCE TRANSDUCER - ELTEK SYSTEMS PRESENTS AN EXTENSIVE RANGE OF LOAD CELLS, FORCE TRANSDUCERS, MULTI COMPONENT FORCE SENSORS, FATIGUE RATED LOAD CELLS, LOW HEIGHT BOLT SENSORS, ETC, THESE ARE ALL MANUFACTURED BY LEBOW, UNITED STATES AND ARE USED FOR A VARIETY OF INDUSTRIAL WEIGHING AND RESEARCH APPLICATIONS IN AUTOMOBILE, ENGINEERING,MACHINE TOOLS, PACKAGING, TEST MACHINES, DEFENSE, SPACE RESEARCH, PROCESS PLANTS, ETC. THESE LOAD CELLS ARE HIGHLY DEPENDABLE FOR LONG TERM, CONTINUOUS APPLICATIONS AND ARE AVAILABLE IN A COMPLETE RANGE FROM 20 N TO 10 MN.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
